# Implementation of Additional Sanctions Against Russia and Belarus Under the Export Administration Regulations (EAR) and Refinements to Existing Controls

> Briefs, arguments, decisions, and more.

URL: https://www.frixlaw.com/law-library/documents/fr%3A2023-03927

## Record

- **Collection:** Federal Register
- **Document type:** Rule
- **Published:** February 27, 2023
- **Citation:** 88 FR 12175

## Text

DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Parts 744 and 746
[Docket No. 230221-0047]
RIN 0694-AJ09
Implementation of Additional Sanctions Against Russia and Belarus Under the Export Administration Regulations (EAR) and Refinements to Existing Controls

AGENCY:

Bureau of Industry and Security, Department of Commerce.

ACTION:

Final rule.

SUMMARY:

In response to the Russian Federation's (Russia's) ongoing aggression against Ukraine, as substantially enabled by Belarus, the Department of Commerce is expanding and strengthening the existing sanctions against Russia and Belarus, including the scope of the Export Administration Regulations (EAR)'s Russian and Belarusian industry sector sanctions and `luxury goods' sanctions. This rule also refines existing export controls on Russia and Belarus. The Department of Commerce is taking these actions to enhance the effectiveness of its controls on both countries and to better align them with those implemented by U.S. allies and partners.

DATES:

This rule is effective on February 24, 2023.

FOR FURTHER INFORMATION CONTACT:

For general questions on this final rule, contact Eileen Albanese, Director, Office of National Security and Technology Transfer Controls, Bureau of Industry and Security, Department of Commerce, Phone: (202) 482-0092, Fax: (202) 482-482-3355, Email:
rpd2@bis.doc.gov.
For emails, include “Russia and Belarus February 2023 sanctions” in the subject line.

SUPPLEMENTARY INFORMATION:

I. Background

In response to Russia's February 2022 further invasion of Ukraine, BIS imposed extensive sanctions on Russia under the Export Administration Regulations (15 CFR parts 730-774) (EAR) as part of the final rule
Implementation of Sanctions Against Russia Under the Export Administration Regulations (EAR)
(the Russia Sanctions Rule), effective on February 24, 2022, and published on March 3, 2022 (87 FR 12226). Effective March 2, 2022, BIS also imposed similar sanctions on Belarus under the EAR in a final rule,
Implementation of Sanctions Against Belarus
(“Belarus Sanctions Rule”), published on March 8, 2022 (87 FR 13048). Since the publication of the Russia Sanctions Rule and the Belarus Sanctions Rule, BIS has published several other final rules imposing stringent export controls on Russia and Belarus. These actions reflect the U.S. Government's position that Russia's invasion of Ukraine, and Belarus's complicity in the invasion, flagrantly violated international law, are contrary to U.S. national security and foreign policy interests, and undermine global order, peace, and security.

The export control measures in this final rule build upon the policy objectives set forth in the earlier rules referenced above. The adoption of these measures, undertaken in part to better align U.S. controls with stringent measures implemented by partner and ally countries, will enhance the effectiveness of the multilateral sanctions on Russia by further limiting access to items that enable Russia's military capabilities and sources of revenue that could support those capabilities. Additionally, the new or expanded controls specified in this rule target Belarus as part of the U.S. response to the country's complicity in Russia's aggression.

II. Overview of New Controls

This rule revises the EAR to enhance and strengthen the existing sanctions against Russia and Belarus by expanding the scope of the Russian and Belarusian industry sector sanctions and the `luxury goods' sanctions to better align them with the controls that have been implemented by U.S. allies and partners imposing substantially similar controls on Russia and Belarus. For similar policy reasons, this rule also refines other existing controls on Russia and Belarus that were imposed in response to the February 2022 further invasion of Ukraine.

III. Amendments to the Export Administration Regulations (EAR)

This rule enhances and strengthens the sanctions that have been implemented on Russia and Belarus under the EAR, as described under Sections A and B below. The regulatory revisions described under
Section A. Imposition of new export controls on Russia and Belarus, including to align the EAR's controls with those imposed by U.S. allies and partners,
include:

• Revisions to the sanctions under supplement no. 2 to part 746 to make conforming changes with other supplements (supplements nos. 4 and 6 to part 746) used under the Russian and Belarusian Industry Sector Sanctions to provide alignment with sanctions imposed by U.S. partners and allies, and make the EAR sanctions stronger, more effective, and easier to understand;

• Expansion of Russian Industry Sector Sanctions under supplement no. 4 to part 746 by adding additional items to align the sanctions with sanctions imposed by U.S. partners and allies and by making other changes to render the EAR's sanctions stronger, more effective, and easier to understand;

• Expansion of Russian Industry Sector Sanctions under supplement no. 6 to part 746 by adding additional items to align them with sanctions imposed by U.S. partners and allies and by making other changes to render the EAR's sanctions stronger, more effective, and easier to understand;

• Expansion of `Luxury Goods' Sanctions by adding additional items to supplement no. 5 to part 746 to align them with sanctions imposed by U.S. allies and partners; and

• Alignment changes to supplement no. 3 to part 746 of the EAR (Countries Excluded from Certain License Requirements of §§ 746.7 and 746.8) to add Taiwan.

The remaining changes are described under
Section B. Corrections and clarifications to existing controls on Russian and Belarus.
The changes described under Section B include:

• Clarification that § 744.7 extends to transfers (in-country), in addition to exports and reexports;

• Clarification that the exclusion for items controlled under ECCN 5A992 or 5D992 under § 746.8 also applies to `Luxury Goods Sanctions' license requirements under § 746.10(a)(1); and

• Conforming changes to the licensing policies under §§ 746.5, 746.8, and 746.10 and addition of a case-by-case license review policy for applications for the disposition of items needed as part of companies curtailing or closing all operations in Russia or Belarus.

A. Imposition of New Export Controls on Russia and Belarus, Including Changes To Align Controls With Those Imposed by U.S. Allies and Partners

This rule expands the scope of the Russian Industry Sector Sanctions by adding additional items to supplement no. 4 to part 746 that will require a license under § 746.5(a)(1)(ii), as

described further below. This rule also expands the scope of the “Luxury Goods” Sanctions by adding additional items to supplement no. 5 to part 746 that will require a license under § 746.10, as described further below.

1. Revisions to the Heading and Contents of Supplement No. 2 to Part 746 so That It Conforms With Other Supplements That Relate to the Russian and Belarusian Industry Sector Sanctions, Thereby Providing Alignment With Controls Imposed by U.S. Partners and Allies and Also Make the EAR's Controls Stronger, More Effective, and Easier To Understand

a.
Clarifying changes to the heading of supplement no. 2 to part 746.

In supplement no. 2 to part 746—Russian Industry Sector Sanctions, this rule makes a clarifying change by revising the section heading to add Belarus and a reference to § 746.5(a)(1)(i). These two changes are made to conform this supplement's heading with the same heading structure used in the other two supplements used to identify items that require a license under the Russian and Belarusian Industry Sector Sanctions,
i.e.,
supplements nos. 4 and 6. These two clarifying changes are intended to make it easier for exporters, reexporters, and transferors to understand the scope of supplement no. 2 to part 746 and to create greater consistency in the three supplement headings used to identify items that require a license if destined for Russian and Belarusian industry sectors.

b.
Changing the methodology for identifying items by using the HTS-6 Code and HTS Description to make it easier to align with U.S. allies' and partners' controls.

In supplement no. 2 to part 746, this rule revises the table to remove the columns for `Schedule B' and `Schedule B description' and adds in their place columns to identify the same set of items but by using the Harmonized Tariff Schedule (HTS)-6 Code and HTS Description. With these changes in the methodology used to identify items, the supplement will now utilize HTS-6 Codes and HTS Descriptions, instead of the applicable Schedule B number and Schedule B Description. This change aligns the underlying controls with those of U.S. allies and partners who are generally using the HS-6 Codes and HS Descriptions, which are equivalent to the HTS-6 Codes and HTS Descriptions used under the U.S. Harmonized Tariff Schedule. Because the HS-6 Codes and HS Descriptions are recognized and used internationally, it will make it easier to align the EAR controls with those of U.S. allies and partners.

c.
Conforming changes to supplement no. 2 to part 746 introductory text to reflect the use of the HTS-6 Codes and HTS Descriptions and to better align this supplement with supplement no. 4 to part 746 introductory text.

This rule makes a conforming change that revises the introductory text of supplement no. 2 to part 746 to remove references to the Schedule B numbers and Schedule B descriptions and adds in their place references to the applicable HTS-6 codes and HTS descriptions, as well as specifying that the source for the HTS-6 codes and descriptions in this list comes from the United States International Trade Commission (USITC's) Harmonized Tariff Schedule of the United States (2023). The revised introductory text to supplement no. 2 is modeled after the same type of description text as used in supplement no. 4 to part 746 and is similarly intended to make it easier for exporters, reexporters, and transferors to understand and comply with the EAR's Russian and Belarusian industry sector sanctions as a whole. The rule also revises the sentence in the introductory text by removing references to three Schedule B numbers that were listed in both supplements nos. 2 and 4 prior to this rule and identifying instead the applicable six HTS-6 codes: 841350, 841360, 842139, 843049, 843139, and 847989.

d.
Expansion and clarification of supplement no. 2 to part 746 to strengthen the controls by specifying that the supplement includes any modified or designed “parts,” “components,” “accessories,” and “attachments” for the items identified in the table to better align the supplement with supplement no. 4 to part 746.

Also in supplement no. 2 to part 746, this rule expands the scope of the items that are subject to the Russian and Belarusian Industry Sector Sanctions by revising newly added paragraph (a) in the introductory text to specify that the items captured include any modified or designed “components,” “parts,” “accessories,” and “attachments” therefor, regardless of their HTS Code or HTS Description.” In many cases these “components,” “parts,” “accessories,” and “attachments” are not specifically identified by HTS Code or HTS Description. Paragraph (a) also specifies that the expansion does not include any “part” or minor “component” that is a fastener (
e.g.,
screw, bolt, nut, nut plate, stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet, bushing, spring, wire, or solder. By expanding the scope of the items set forth in the supplement in this manner, this revision aligns this aspect of supplement no. 2 with supplement no. 4, which also already included the same text for “components,” “parts,” “accessories,” and “attachments,” and generally promotes and enhances the strength and effectiveness of the sanctions set forth in this supplement.

e.
Clarifications to supplement no. 2 to part 746 introductory text to specify that the scope of the license requirement applies to an item's HTS-6 Code and describe how such information relates to other information in the supplement's table, as well as to content describing other HTS Codes that are longer but still derived from HTS-6 Codes.

This rule adds a new paragraph (b) to specify that the items identified in the HTS-6 Code column of supplement no. 2 to part 746 are the items that are subject to the license requirement under § 746.5(a)(1)(i). This rule adds one sentence to paragraph (b) to clarify that that HTS Description is included as a column heading under the table to assist exporters with their Automated Export System (AES) filing responsibilities and to have a better idea of the types of items that fall under specific HTS-6 Codes. This rule also adds a sentence to specify that the HTS-6 Code governs in determining the license requirement. For example, if an exporter “knows” their item is classified under an HTS-6 Code in supplement no. 2 to part 746, but does not believe that their item matches the corresponding HTS Description in supplement no. 2 to part 746, the HTS-6 Code will control for determining the license requirement under § 746.5(a)(1)(i). Likewise, if someone believes their item could potentially meet the description of more than one HTS Description, the HTS-6 Code will control. As noted above, the HTS Description is intended to assist exporters with their AES filing responsibilities but does not govern whether an item is identified under supplement no. 2 to part 746. Lastly, this rule adds a sentence to new paragraph (b) to clarify that the license requirements extend to HTS Codes at the 8 and 10 digit level when those HTS-8 and HTS-10 codes begin with the HTS-6 Codes as their first 6 numbers. This text is intended to prevent an exporter from identifying an item at the 8 or 10 digit level as a way to try to evade these controls. If the 8 or 10 digit code for the item begins with one of the HTS-6 Codes (that is, matches the first six numbers of the latter) that are specified in the table, the item will require a license under § 746.5(a)(1)(i).

BIS estimates these changes to supplement no. 2 to part 746 will result in an additional two license applications submitted to BIS annually.

2. Expansion of Russian and Belarusian Industry Sector Sanctions Under Supplement No. 4 to Part 746 To Add Additional Items To Align With Controls Imposed by U.S. Partners and Allies and Make Other Changes To Render the EAR's Controls Stronger, More Effective, and Easier To Understand

a.
Expansion of the controls by adding 322 HTS-6 Codes to supplement no. 4 to part 746.

In supplement no. 4 to part 746—Russian and Belarusian Industry Sector Sanctions pursuant to § 746.5(a)(1)(ii), this rule expands the scope of the Russian and Belarusian Industry Sector Sanctions by adding 322 additional HTS-6 Code entries corresponding to 322 industrial items that will require a license for export or reexport to or transfer within Russia or Belarus under § 746.5(a)(1)(ii). The restrictions on these additional industrial items are intended to further undermine the Russian and Belarusian industrial bases and their ability to continue to support the Russian invasion of and subsequent military aggression in Ukraine. The items added include a variety of electronics, industrial machinery, and equipment. The complete list of 322 new HTS-6 Codes this rule adds to supplement no. 4 are as follows: 720810, 720825, 720826, 720827, 720836, 720837, 720838, 720839, 720840, 720851, 720852, 720853, 720854, 720890, 720915, 720916, 720917, 720918, 720925, 720926, 720927, 720928, 720990, 721011, 721012, 721020, 721030, 721041, 721049, 721050, 721061, 721069, 721070, 721119, 721123, 721190, 721220, 721230, 721240, 721250, 721911, 721912, 721913, 721914, 721921, 721922, 721923, 721924, 721931, 721932, 721933, 721934, 721935, 721990, 722011, 722012, 722020, 722090, 722511, 722540, 722550, 722591, 722592, 722611, 722619, 722620, 722692, 722699, 730810, 730820, 730830, 730840, 730890, 731021, 731029, 761010, 761090, 761210, 840410, 840420, 840490, 840510, 840681, 840682, 840721, 840729, 840810, 840820, 840890, 840999, 841090, 841111, 841112, 841121, 841122, 841191, 841311, 841319, 841330, 841350, 841360, 841381, 841410, 841610, 841620, 841630, 841690, 841720, 841919, 841950, 841960, 841990, 842111, 842611, 842619, 842620, 842630, 842641, 842649, 842691, 842710, 842790, 842831, 842870, 842911, 842920, 842930, 842940, 842951, 842952, 843049, 843120, 843139, 843141, 844319, 845420, 845490, 845522, 845530, 845620, 845640, 845710, 845730, 845811, 845819, 845891, 845899, 845921, 845931, 845941, 845961, 846012, 846019, 846022, 846023, 846024, 846029, 846031, 846039, 846040, 846222, 846223, 846224, 846225, 846226, 846229, 846232, 846233, 846239, 846242, 846249, 846251, 846259, 846261, 846262, 846263, 846269, 846290, 846310, 846320, 846330, 846390, 846410, 846420, 846490, 846691, 846693, 846694, 846810, 846820, 846880, 847330, 847431, 847730, 847981, 847982, 848130, 848250, 848310, 848320, 848330, 848340, 848350, 848360, 848390, 848520, 848530, 848590, 848610, 848620, 848630, 848640, 848710, 850153, 850211, 850212, 850300, 850511, 850590, 850710, 850720, 851110, 851120, 851130, 851140, 851150, 851180, 851190, 851220, 851290, 851411, 851419, 851420, 851490, 851511, 851519, 851521, 851529, 851680, 851771, 851779, 852351, 852581, 852582, 852583, 852589, 852610, 852721, 852849, 852910, 853080, 853221, 853224, 853229, 853230, 853290, 853400, 853510, 853521, 853650, 853690, 853810, 853929, 853951, 853952, 854121, 854129, 854130, 854141, 854142, 854143, 854149, 854320, 854330, 854411, 854430, 854449, 854470, 854520, 854710, 854800, 854911, 854912, 854913, 854914, 854919, 854921, 854929, 854931, 854939, 854991, 854999, 870310, 870423, 870510, 870540, 871690, 900110, 900510, 900580, 900590, 901380, 901410, 901420, 901480, 901490, 901510, 901520, 902480, 902519, 902590, 902710, 902781, 902789, 902920, 902990, 903032, 903039, 903040, 903082, and 903089.

b.
Removal of Schedule B and Schedule B Description columns under supplement no. 4 to part 746 to make it easier to understand the supplement's scope and to align the controls with those imposed by U.S. allies and partners.

Also in supplement no. 4 to part 746, this rule revises the table to remove the columns for Schedule B and Schedule B Description while retaining the existing HTS Code and HTS Description columns. With these changes, the supplement will now utilize HTS-6 Code and the HTS Description, instead of the Schedule B and Schedule B Description. This change aligns the underlying controls with those of U.S. allies and partners who generally use HS-6 Codes and HS Descriptions, which are equivalent to the HTS-6 Codes and HTS Descriptions used under the U.S. Harmonized Tariff Schedule. Because the HS-6 Codes and HS Descriptions are recognized and used internationally, these changes will make it easier to align these EAR controls with those of U.S. allies and partners.

c.
Revision to the column used to identify the license requirement under supplement no. 4 to part 746 to use the HTS-6 Code column instead of the HTS Description column.

Prior to this rule, the supplement no. 4 to part 746 introductory text specified that the HTS Description column is determinative in identifying the items that require a license under § 746.5(a)(1)(ii). BIS determined that in making changes to align the EAR's controls in this supplement with those imposed by U.S. allies and partners, it would be preferable from a consistency and precision perspective to make the HTS-6 Code, as opposed to the HTS Description, be the determinative factor in assessing licensing obligations under § 746.5(a)(1)(ii). While using the HTS-6 Code instead of the HTS Description may result in some additional items being subject to the license requirements under § 746.5(a)(1)(ii), as a general matter, using the HTS-6 column will make it easier for exporters, reexporters, and transferors to understand and comply with these controls. This revision may also facilitate the licensing of these items by BIS. The use of the HTS-6 Code to identify the items subject to the license requirement under § 746.5(a)(1)(ii) will also help to improve the effectiveness of enforcement-related activities because it will be easier for BIS and other U.S. Government enforcement officials to identify items that require a license under supplement no. 4 to part 746 due to the fact that if there is a match between an HTS-6 Code in the Electronic Export Information (EEI) data filed in the Automated Export System (AES) and an HTS-6 Code identified under supplement no. 4 to part 746, a license will be required for the export of the item at issue.

d.
Clarifications to the supplement no. 4 to part 746 introductory text to specify how the HTS-6 Codes relate to other information in the table, as well as to content referring to other HTS Codes that are longer but derived from HTS-6 Codes.

Similar to the clarifications described above to the supplement no. 2 to part 746 introductory text, this rule revises paragraph (b) under the supplement no. 4 to part 746 introductory text to clarify

that that HTS Description is included as a column heading under the table to assist exporters with their AES filing responsibilities, as well as to provide them with clarity regarding the types of items that fall under specific HTS-6 Codes. This rule also adds a sentence to specify that the HTS-6 Code governs in determining the license requirement. As with the example provided above for supplement no. 2 to part 746 where an exporter believes more than one HTS Description may apply to their item, the HTS-6 Code governs the license requirements for the items set forth in supplement no. 4 to part 746. Lastly, this rule adds a sentence to new paragraph (b) to clarify that the license requirements extend to HTS Codes at the 8 and 10 digit level when those HTS-8 and HTS-10 codes begin with the HTS-6 Codes as their first 6 numbers. This text is intended to prevent an exporter from identifying an item at the 8 or 10 digit level as a way to try to evade these controls. If the 8 or 10 digit code begins with the six numbers of one of the HTS-6 Codes in the table, it will require a license under § 746.5(a)(1)(i).

BIS estimates these changes to supplement no. 4 to part 746 will result in an additional 10 license applications submitted to BIS annually.

3. Expansion of Russian and Belarusian Industry Sector Sanctions Under Supplement No. 6 to Part 746 To Add Additional Items To Align With Controls Imposed by U.S. Partners and Allies and Make Other Changes To Render the Controls Stronger, More Effective, and Easier To Understand

In supplement no. 6 to part 746, this rule expands the list of items that require a license under § 746.5(a)(1)(iii) to better align these Russian and Belarusian Russian Industry Sector Sanctions with the U.S. allies' and partners' controls. This rule also makes certain clarifying changes to facilitate understanding of the controls, such as adding explanatory notes. Specifically, this rule makes the following changes to supplement no. 6 to part 746:

a. Under paragraph (c), by expanding the scope of the paragraph to add `thiafentanil' as an additional chemical to align with controls imposed by U.S. allies and partners on the same chemical.

b. Under paragraph (e), this rule makes the following changes:

Under paragraph (e)(4) this rule clarifies the scope of items controlled by adding the words “isolated or purified' before the references to nucleotides and oligonucleotides and by adding an `and' between the terms nucleotides and oligonucleotides. This rule also deletes the phrase `and reagents for oligonucleotide synthesis' and the `or' at the end of the paragraph. These words are no longer needed because of the greater specificity that has been added by the other changes to this paragraph. Additionally, due to the addition of new paragraphs (e)(6) and (7), the `or' is no longer needed between paragraphs (e)(4) and (5).

Under paragraph (e)(5), this rule clarifies the scope of items controlled by adding the words “isolated or purified' before amino acids, peptides, and proteins. This rule also adds an `and' between the terms peptides and proteins and deletes the phrase `and resins and reagents for peptide synthesis at the end of the paragraph. This deletion is being made in light of the greater specificity that has been added with the other changes to paragraph (e)(5).

This rule adds a new paragraph (e)(6) to control reagents and materials for oligonucleotide synthesis, n.e.s. This rule also adds a new paragraph (e)(7) to control resins, reagents, and materials for peptide synthesis under the Russian and Belarusian Industry Sector Sanctions set forth in § 746.5(a)(1)(iii). These expansions are made to align with the U.S. allies' and partners' controls on these items and to further strengthen the EAR's controls.

c. Under paragraph (f), this rule makes the following changes:

Under paragraph (f)(1), this rule removes the term `fermenters' because it is not needed for defining the scope of the control, as fermenters are listed under paragraph (f)(12) of this rule. This change is made to align this control with the controls imposed by the U.S. allies and partners and to make it easier for exporters to understand the scope of the control.

Under paragraph (f)(2), this rule removes the phrase `in which all surfaces that come into direct contact with the chemicals being processed are made from controlled materials' and in its place adds the broader term `n.e.s.' This phrase was removed because the words `controlled materials' was confusing from a compliance perspective. Under paragraph (f)(3), this rule adds the term “components” to the scope of the control and adds quotes around the terms “parts” and “accessories” to clarify that these terms are defined terms under the EAR. This clarification addresses questions that BIS has received from exporters regarding whether consumables are captured under paragraph (f)(3). As described below, this rule adds a note to paragraph (f) to specify that “components, parts, and accessories” include consumables.

Under paragraph (f)(10), this rule expands the scope of the control by adding `and microarrays' after well plates. This term is added to better achieve the intended scope of the control and to strengthen it.

Under paragraph (f)(13), this rule clarifies the scope of the paragraph by adding the term “and ultracentrifuges” and by adding quotes around the EAR-defined terms “components” and “accessories.” Biological sample separation capabilities capture `ultracentrifuges' as well as `centrifuges.' The addition of the term `ultracentrifuges' will make the scope of the control parameter clearer.

Under paragraphs (f)(14) through (17), this rule expands their scope by adding the defined EAR terms “components,” “parts,” and “accessories.” These terms are added to better achieve the intended scope of these controls, to better align them with U.S. allies' and partners' controls, and to strengthen the EAR's controls. In addition, under paragraph (f)(16), this rule adds the term `and qPCR' to clarify that these types of instruments are caught under the control parameter in addition to Polymerase chain reaction (PCR) instruments. While `qPCR' instruments already fell under the scope of the paragraph (e)(16) control parameter, this added text will make it clearer and better align with the U.S. allies' and partners' controls, which reference the term `qPCR.'

Under paragraph (f)(18), this rule adds quotes around the EAR-defined terms “components,” “parts,” and “accessories” and adds the term “n.e.s.' to clarify the scope of this control parameter.

Under paragraph (f)(19), this rule expands the scope of the paragraph by adding the EAR-defined terms “components,” “parts,” and “accessories.” These terms are added to better achieve the intended scope of these controls and strengthen them, as well as better align them with U.S. allies' and partners' controls.

Under paragraph (f)(22), this rule removes the word `or' because it is no longer needed with the addition of new paragraphs (f)(24) through (27) described below.

Under paragraph (f)(23), this rule expands the scope of the paragraph by adding the EAR-defined terms “parts” and “accessories,” as well as adding term `n.e.s.' These terms are added to better achieve the intended scope of these controls and strengthen them, as well as better align them with U.S. allies' and partners' controls.

This rule adds a new paragraph (f)(24) to control “microreactors, n.e.s.” This rule adds a new paragraph (f)(25) to control `solid and liquid aerosol generating equipment, n.e.s.'; a new paragraph (f)(26) to control `laboratory milling equipment, “components,” “parts,” and “accessories,” n.e.s.'; and a new paragraph (f)(27) to control `peptide synthesizers, “components,” “parts,” and “accessories.” These expansions are made to align BIS's controls with the controls that U.S. allies and partners have imposed on these items and to strengthen them.

As mentioned above, this rule also adds a new Note 6 to paragraph (f). The new note clarifies that consistent with the definitions in part 772 of the EAR, “components,” “parts,” and “accessories” include consumables. The clarifications to paragraph (f), along with the new Note 6 to paragraph (f), will clarify that consumables are within the scope of the control parameters.

Lastly, under paragraph (f)(23), this rule revises Technical Note 1 to paragraph (f)(23) to specify that consistent with EU List X.B.X.001, for purposes of paragraph (f)(23), `continuous flow reactors' consist of plug and play systems. This revised technical note clarifies that these are plug and play systems in which reactants are continuously fed into the reactor and the resultant product is collected at the outlet.

BIS estimates these changes to supplement no. 2 to part 746 will result in an additional 10 license applications submitted to BIS annually.

4. Expansion of `Luxury Goods' Sanctions To Add Additional Items To Supplement No. 5 to Part 746 To Align With U.S. Allies' and Partners' `Luxury Goods' Controls and Strengthen the EAR's Controls

In supplement no. 5 to part 746—`Luxury Goods' Sanctions for Russia and Belarus Pursuant to § 746.10(a)(1) and (2), this rule expands the scope of the `Luxury Goods' Sanctions by adding two hundred and seventy-six additional entries that will require a license for export or reexport to or transfers within Russia or Belarus and for designated Russian and Belarusian oligarchs and malign actors worldwide under § 746.10(a)(1) and (2). The restrictions on these additional items are intended to impose additional costs on Russians and Belarusians supporting the Russian government's invasion of Ukraine. The items this rule adds include a variety of `luxury goods.' The addition of these items will strengthen BIS's controls under the EAR and also align them with the controls imposed by U.S. allies and partners on these items.

BIS estimates these changes to supplement no. 5 to part 746 will result in an additional 15 license applications submitted to BIS annually.

5. Alignment Changes To Supplement No. 3 to Part 746 of the EAR To Add Taiwan

As noted above, in response to Russia's February 2022 invasion of Ukraine and Belarus's s complicity in the invasion, BIS imposed extensive export controls on Russia and Belarus under the EAR. However, certain of the new licensing requirements pertaining to foreign-produced items under § 746.8 do not apply to countries that have committed to implementing substantially similar export controls on Russia and Belarus under their domestic laws. These countries are listed in supplement no. 3. to part 746 of the EAR. Pursuant to § 746.8(a)(5) of the EAR, countries that have made such a commitment receive full or partial exclusions, as appropriate, from the Foreign Direct Product rules' license requirements set forth under § 746.8(a)(2) and (3), as well as under § 746.7(a)(1)(iii), as a result of a revision included in another rule published in today's
Federal Register
that revised supplement no. 3 to part 746 as described further below. Similarly, in the case of such “excluded” countries, the license requirements in § 746.8(a)(1) are not used to determine U.S.-origin controlled content under the EAR's
de minimis
rules, as set forth in supplement no. 2 to part 734 of the EAR, provided that the criteria in § 746.8(a)(5)(i) and (ii) are met.

Pursuant to the Russia Sanctions rule, 32 countries were added to new supplement no. 3. In March 2022, BIS published a rule that added South Korea to the list of countries,
1

and in April 2022, it published a rule that added Iceland, Liechtenstein, Norway, and Switzerland to the list.
2

Taiwan has implemented measures on Russia and Belarus that are substantially similar to those imposed by BIS. In this rule, in recognition of Taiwan's implementation of such measures, BIS is adding Taiwan to supplement no. 3 to part 746 of the EAR with the designation of “full.”

1
87 FR 13627 (Mar. 10, 2022).

2
87 FR 21554 (Apr. 12, 2022).

Lastly, this rule makes a conforming change to the heading of supplement no. 3 to part 746 to conform with a revision that is being made by another final rule published in today's issue of the
Federal Register
,
Export Control Measures on Iran Under the Export Administration Regulations (EAR) to Address Iranian Unmanned Aerial Vehicles (UAV) and Their Use by Russia Against Ukraine,
that is revising the heading of supplement no. 3 to part 746.

B. Corrections and Clarifications to Existing Controls on Russian and Belarus

BIS estimates the changes described in Section B of this final rule will not result in the submission of any additional license applications to BIS. Some of the clarifications this rule makes were also described above under Section A where the clarifications and expansions were being made to the same EAR section or supplement. The corrections and clarifications under Section B do not include expansion of the controls, which includes the clarifications to § 744.7.

1. Clarification That § 744.7 Also Extends to Transfers (In-Country), in Addition to Exports and Reexports

In § 744.7, this rule adds the term “transfer (in-country)” wherever the terms “exports” and “reexports” occur to clarify that the license requirements of this section also apply to transfers (in-country). BIS is making this clarification as part of this rule due to the increased importance of this part 744 end-use control for imposing license requirements for Russian and Belarusian aircraft and vessels. In addition, BIS has received a number of questions recently from the public on whether the controls extend to transfers (in-country). These questioners have typically requested confirmation that their understanding is correct that the § 744.7 requirements included transfers (in-country), indicating that there is not a misunderstanding of this provision by the exporting community. However, to provide further guidance to exporters and to help further strengthen understanding and compliance with the Russia and Belarus sanctions related to items being exported, reexported, transferred (in-country) to such aircraft or vessels, this rule adds transfer (in-country) to § 744.7.

2. Clarification That the Exclusion for Items Controlled Under ECCN 5A992 or 5D992 Under § 746.8 Also Applies to `Luxury Goods Sanctions' License Requirements Under § 746.10(a)(1)

In § 746.10 (`Luxury goods' sanctions against Russia and Belarus and Russian and Belarusian oligarchs and malign actors), this rule adds introductory text to paragraph (a) to clarify that the same exclusion for ECCNs 5A992 or 5D992 under § 746.8(a) introductory text also applies to the `luxury goods' sanctions

under § 746.10(a)(1). This exclusion text is added to ensure that the `luxury goods' license requirements under § 746.10(a)(1) do not undermine the scope of the ECCNs 5A992 and 5D992 exclusion under § 746.8 because certain items under supplement no. 5 to part 746 are also classified under ECCNs 5A992 or 5D992, which effectively negates some of the exclusion under § 746.8. This rule addresses this by adding the same exclusion text for ECCNs 5A992 and 5D992, so that the license requirement under § 746.10(a)(1) does not impose a separate license requirement on items that are within the scope of the exclusion text in § 746.8.

3. Conforming Changes to the Licensing Policies Under §§ 746.5, 746.8, and 746.10 and Addition of Case-by-Case License Review Policy for Applications for the Disposition of Items Needed as Part of Companies Curtailing or Closing All Operations in Russia or Belarus

In §§ 746.5, 746.8, and 746.10, this rule makes two changes to the license review policies of these sections to make conforming changes and to add one additional case-by-case license review policy.

a.
Conforming changes to the license review policies in §§ 746.5, 746.8, and 746.10.

In §§ 746.5(b)(1) and (2) and 746.10(b), this rule makes conforming changes to each of the licensing policies to conform to the structure of the licensing policy paragraph under § 746.8(b). This rule does so by revising each of the sentences that specifies the policy of denial license review policy by adding a period and then adding a new sentence adding the same case-by-case license review policy text to §§ 746.5(b)(1) and (2) and 746.10(b), as is currently found in § 746.8(b). These changes also specify that license applications under those sections, will be reviewed on a case-by-case basis to determine whether the transaction in question would benefit the Russian or Belarusian government or defense sector.

b.
Addition of case-by-case license review policy for applications for the disposition of items by companies curtailing or closing all operations in Russia or Belarus.

In §§ 746.5(b)(1) and (2), 746.8(b), and 746.10(b), this rule adds a new case-by-case license review policy for applications for the disposition of items by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 that are curtailing or closing all operations in Russia or Belarus. Companies deciding to curtail or close all operations in Russia put further pressure on the Russian government and on the Russian and Belarusian defense industrial base, as their departure will hollow out both countries' industrial capacity and economy, which may lead to further degradation of their defense industrial base. BIS encourages companies to exit the Russian and Belarusian markets and is making these changes to facilitate such decisions. In curtailing or closing operations in Russia or Belarus, many companies and other entities have encountered difficulties, such as issues related to the disposition of items subject to the EAR that may be too large or cost-prohibitive to remove from Russia. The new case-by-case license review policy added by this rule will facilitate the orderly exit of companies and entities from Russia and Belarus in a manner consistent with U.S. national security and foreign policy interests. As discussed above, BIS will review such license application to determine whether the disposition of these items will benefit the Russian or Belarusian government or military.

Savings Clause

For the changes being made in this final rule, shipments of items removed from eligibility for a License Exception or export, reexport, or transfer (in-country) without a license (NLR) as a result of this regulatory action that were en route aboard a carrier to a port of export, reexport, or transfer (in-country), on February 24, 2023, pursuant to actual orders for export, reexport, or transfer (in-country) to or within a foreign destination, may proceed to that destination under the previous eligibility for a License Exception or export, reexport, or transfer (in-country) without a license (NLR), provided the export, reexport, or transfer (in-country) is completed no later than on March 27, 2023.

Export Control Reform Act of 2018

On August 13, 2018, the President signed into law the John S. McCain National Defense Authorization Act for Fiscal Year 2019, which included the Export Control Reform Act of 2018 (ECRA) (codified, as amended, at 50 U.S.C. 4801-4852). ECRA provides the legal basis for BIS's principal authorities and serves as the authority under which BIS issues this rule. To the extent it applies to certain activities that are the subject of this rule, the Trade Sanctions Reform and Export Enhancement Act of 2000 (TSRA) (codified, as amended, at 22 U.S.C. 7201-7211) also serves as authority for this rule.

Rulemaking Requirements

1. This final rule is not a “significant regulatory action” because it “pertain[s]” to a “military or foreign affairs function of the United States” under sec. 3(d)(2) of Executive Order 12866.

2. Notwithstanding any other provision of law, no person is required to respond to, nor shall any person be subject to a penalty for failure to comply with, a collection of information subject to the requirements of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501
et seq.
) (PRA), unless that collection of information displays a currently valid Office of Management and Budget (OMB) Control Number.

This rule involves the following OMB-approved collections of information subject to the PRA:

• 0694-0088, “Multi-Purpose Application,” which carries a burden hour estimate of 29.4 minutes for a manual or electronic submission;

• 0694-0096 “Five Year Records Retention Period,” which carries a burden hour estimate of less than 1 minute; and

• 0607-0152 “Automated Export System (AES) Program,” which carries a burden hour estimate of 3 minutes per electronic submission.

BIS estimates that these new controls on Russia and Belarus under the EAR will result in an increase of 37 license applications submitted annually to BIS. However, the additional burden falls within the existing estimates currently associated with these control numbers. Additional information regarding these collections of information—including all background materials—can be found at
https://www.reginfo.gov/public/do/PRAMain
by using the search function to enter either the title of the collection or the OMB Control Number.

3. This rule does not contain policies with federalism implications as that term is defined in Executive Order 13132.

4. Pursuant to section 1762 of the Export Control Reform Act of 2018 (50 U.S.C. 4821) (ECRA), this action is exempt from the Administrative Procedure Act (APA) (5 U.S.C. 553) requirements for notice of proposed rulemaking, opportunity for public participation, and delay in effective date. While section 1762 of ECRA provides sufficient authority for such an exemption, this action is also independently exempt from these APA requirements because it involves a military or foreign affairs function of the United States (5. U.S.C. 553(a)(1)).

5. Because a notice of proposed rulemaking and an opportunity for

public comment are not required to be given for this rule by 5 U.S.C. 553, or by any other law, the analytical requirements of the Regulatory Flexibility Act, 5 U.S.C. 601,
et seq.,
are not applicable. Accordingly, no regulatory flexibility analysis is required and none has been prepared.

List of Subjects

15 CFR Part 744
Exports, Reporting and recordkeeping requirements, Terrorism.

15 CFR Part 746
Exports, Reporting and recordkeeping requirements.

For the reasons stated in the preamble, parts 744 and 746 of the Export Administration Regulations (15 CFR parts 730 through 774) are amended as follows:

PART 744—CONTROL POLICY: END USE AND END USER CONTROLS

1. The authority citation for part 744 continues to read as follows:

Authority:

50 U.S.C. 4801-4852; 50 U.S.C. 4601
et seq.;
50 U.S.C. 1701
et seq.;
22 U.S.C. 3201
et seq.;
42 U.S.C. 2139a; 22 U.S.C. 7201
et seq.;
22 U.S.C. 7210; E.O. 12058, 43 FR 20947, 3 CFR, 1978 Comp., p. 179; E.O. 12851, 58 FR 33181, 3 CFR, 1993 Comp., p. 608; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13099, 63 FR 45167, 3 CFR, 1998 Comp., p. 208; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13224, 66 FR 49079, 3 CFR, 2001 Comp., p. 786; Notice of September 19, 2022, 87 FR 57569 (September 21, 2022); Notice of November 8, 2022, 87 FR 68015 (November 10, 2022).

2. Section 744.7 is amended by revising paragraphs (a) introductory text, (b)(1) introductory text, and (b)(2) introductory text to read as follows:

§ 744.7
Restrictions on certain exports to and for the use of certain foreign vessels or aircraft.

(a)
General end-use prohibition.
In addition to the license requirements for items specified on the CCL, you may not export, reexport, or transfer (in-country) an item subject to the EAR to, or for the use of, a foreign vessel or aircraft, whether an operating vessel or aircraft or one under construction, located in any port including a Canadian port, unless a License Exception or NLR permits the shipment to be made:

(b)
Exception for U.S. and Canadian carriers.
(1)
Exception to general end-use prohibition.
Notwithstanding the general end-use prohibition in paragraph (a) of this section, export, reexport, and transfer (in-country) may be made of the commodities described in paragraph (b)(3) of this section, for use by or on a specific vessel or plane of U.S. or Canadian registry located at any seaport or airport outside the United States or Canada except a port in Country Group D:1 (excluding the PRC), (see supplement no. 1 to part 740) provided that such commodities are all of the following:

(2)
Exports to U.S. or Canadian Airline's Installation or Agent.
Exports, reexports, and transfers (in-country) of the commodities described in paragraph (e) of this section, except fuel, may be made to a U.S. or Canadian airline's installation or agent in any foreign destination except Country Group D:1 (excluding the PRC), (see supplement no. 1 to part 740) provided such commodities are all of the following:

PART 746—EMBARGOES AND OTHER SPECIAL CONTROLS

3. The authority citation for 15 CFR part 746 is revised to read as follows:

Authority:

50 U.S.C. 4801-4852; 50 U.S.C. 4601
et seq.
; 50 U.S.C. 1701
et seq.;
22 U.S.C. 287c; Sec 1503, Pub. L. 108-11, 117 Stat. 559; 22 U.S.C. 2151 note; 22 U.S.C. 6004; 22 U.S.C. 7201
et seq.
; 22 U.S.C. 7210; E.O. 12854, 58 FR 36587, 3 CFR, 1993 Comp., p. 614; E.O. 12918, 59 FR 28205, 3 CFR, 1994 Comp., p. 899; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13338, 69 FR 26751, 3 CFR, 2004 Comp., p 168; Presidential Determination 2003-23, 68 FR 26459, 3 CFR, 2004 Comp., p. 320; Presidential Determination 2007-7, 72 FR 1899, 3 CFR, 2006 Comp., p. 325; Notice of May 9, 2022, 87 FR 28749 (May 10, 2022).

4. Section 746.5 is amended by revising paragraph (b) to read as follows:

§ 746.5
Russian and Belarusian Industry Sector Sanctions.

(b)
Licensing policy.
(1) Applications for the export, reexport, or transfer (in-country) of any item pursuant to paragraph (a)(1)(i) of this section that requires a license for Russia or Belarus will be reviewed under a policy of denial when for use directly or indirectly for exploration or production from deepwater (greater than 500 feet), Arctic offshore, or shale projects in Russia or Belarus that have the potential to produce oil or gas. The following types of license applications will be reviewed on a case-by-case basis to determine whether the transaction in question would benefit the Russian or Belarusian government or defense sector: applications for export, reexport, or transfer (in-country) of items that may be necessary for health and safety reasons and applications for the disposition of items by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are curtailing or closing all operations in Russia or Belarus.

(2) Applications for the export, reexport, or transfer (in-country) of any item pursuant to paragraph (a)(1)(ii) or (iii) of this section that requires a license for Russia or Belarus will be reviewed under a policy of denial. The following types of license applications will be reviewed on a case-by-case basis to determine whether the transaction in question would benefit the Russian or Belarusian government or defense sector: applications for export, reexport, or transfer (in-country) of items that may be necessary for health and safety reasons; applications for items that meet humanitarian needs; and applications for the disposition of items by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are curtailing or closing all operations in Russia or Belarus.

5. Section 746.8 is amended by revising paragraph (b) to read as follows:

§ 746.8
Sanctions against Russia and Belarus.

(b)
Licensing policy.
With limited exceptions, applications for the export, reexport, or transfer (in-country) of any item that requires a license pursuant to the requirements of this section will be reviewed with a policy of denial. The following types of license applications for licenses required under paragraphs (a)(1) and (2) of this section will be reviewed on a case-by-case basis to determine whether the transaction in question would benefit the Russian or Belarusian government or defense sector: applications related to safety of flight; applications related to maritime safety; applications for civil nuclear safety; applications to meet humanitarian needs; applications that support government space cooperation; applications for items destined to wholly-owned U.S. subsidiaries, branches, or sales offices, foreign subsidiaries, branches, or sales offices of U.S. companies that are joint ventures with other U.S. companies, joint ventures of U.S. companies with companies headquartered in countries from Country Group A:5 and A:6 in supplement no. 1 to part 740 of the EAR, the wholly-owned subsidiaries, branches, or sales offices of companies headquartered in countries from Country Group A:5 and A:6 in supplement no. 1 to part 740, joint

ventures of companies headquartered in Country Groups A:5 and A:6 with other companies headquartered in Country Groups A:5 and A:6; applications for companies headquartered in Country Groups A:5 and A:6 to support civil telecommunications infrastructure; applications for government-to-government activities; and applications for the disposition of items by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are curtailing or closing all operations in Russia or Belarus. License applications required under paragraph (a)(3) of this section will be reviewed under a policy of denial in all cases.

6. Section 746.10 is amended by adding paragraph (a) introductory text and revising paragraph (b) to read as follows:

§ 746.10
`Luxury Goods' Sanctions Against Russia and Belarus and Russian and Belarusian Oligarchs and Malign Actors.

(a)
License requirements.
For purposes of paragraphs (a)(1) of this section, commodities and software classified under ECCNs 5A992 or 5D992 that have been `classified in accordance with § 740.17' do not require a license to or within Russia or Belarus for civil end-users that are wholly-owned U.S. subsidiaries, branches, or sales offices, foreign subsidiaries, branches, or sales offices of U.S. companies that are joint ventures with other U.S. companies, joint ventures of U.S. companies with companies headquartered in countries from Country Group A:5 and A:6 in supplement no. 1 to part 740 of the EAR, the wholly-owned subsidiaries, branches, or sales offices of companies headquartered in countries from Country Group A:5 and A:6 in supplement no. 1 to part 740, or joint ventures, branches, or sales offices of companies headquartered in Country Group A:5 and A:6 with other companies headquartered in Country Groups A:5 and A:6. In addition, for purposes of paragraphs (a)(1) and (2), transfers within Russia or Belarus for reexports (
i.e.,
return) to the United States or a country in Country Group A:5 or A:6 of any item, provided the owner retains title to and control of the item at all times, do not require a license. If a license is required for a reexport to a Country Group A:5 or A:6 country from Russia or Belarus, a separate EAR authorization is required to authorize the reexport.

(b)
Licensing policy.
Applications for the export, reexport, or transfer (in-country) of any item that requires a license for pursuant to the requirements of this section will be reviewed with a policy of denial. The following types of license applications will be reviewed on a case-by-case basis to determine whether the transaction in question would benefit the Russian or Belarusian government or defense sector: applications involving items to meet humanitarian needs and applications for the disposition of items by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are curtailing or closing all operations in Russia or Belarus. The case-by-case license application review policy for items to meet humanitarian needs is included to address certain `luxury goods' items that may be used in medical devices or situations in which a case-by-case analysis is needed to determine whether a license application should be approved to meet humanitarian needs while also taking into account the applicable broader U.S. national security and foreign policy concerns.

7. Supplement No. 2 to part 746 is revised to read as follows:
Supplement No. 2 to Part 746—Russian and Belarusian Industry Sector Sanction List Pursuant to § 746.5(a)(1)(i)

(a) The source for the Harmonized Tariff Schedule (HTS)-6 codes and descriptions in this list comes from the United States International Trade Commission (USITC's) Harmonized Tariff Schedule of the United States (2023). The items described in supplement no. 2 to part 746 include any modified or designed “components,” “parts,” “accessories,” and “attachments” therefor regardless of the HTS Code or HTS Description of the “components,” “parts,” “accessories,” and “attachments,” apart from any “part” or minor “component” that is a fastener (
e.g.,
screw, bolt, nut, nut plate, stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet, bushing, spring, wire, or solder. This supplement includes two columns consisting of the HTS Code and HTS Description to assist exporters, reexporters, and transferors in identifying the products in this supplement. For information on HTS codes in general, you may contact a local import specialist at U.S. Customs and Border Protection at the nearest port. HTS-6 codes 841350, 841360, 842139, 843049, 843139, and 847989 are listed in both this supplement and supplement no. 4 to this part, so exporters, reexporters, and transferors must comply with the license requirements under both § 746.5(a)(1)(i) and (ii) as applicable.

(b) The items identified in the HTS-6 Code column of this supplement are subject to the license requirement under § 746.5(a)(1)(i). The other column—HTS Description—is intended to assist exporters with their Automated Export System (AES) filing responsibilities. The license requirements apply to HTS Codes at the 8 and 10 digit level (HTS-8 and HTS-10 Codes, respectively) when such longer HTS codes begin with the HTS-6 Codes as their first 6 numbers.

HTS-6 code
HTS description

730411
LINE PIPE FOR OIL AND GAS PIPELINES, OF STAINLESS STEEL.

730419
LINE PIPE FOR OIL AND GAS PIPELINES, OF SEAMLESS IRON (OTHER THAN CAST IRON) OR STEEL, NES.

730422
DRILL PIPE OF A KIND USED IN DRILLING FOR OIL OR GAS, OF STAINLESS STEEL.

730423
DRILL PIPE OF A KIND USED IN DRILLING FOR OIL OR GAS, OF IRON (EXCEPT CAST IRON) OR STEEL. NES.

730424
CASING & TUBING USED IN DRILLING FOR OIL OR GAS, OTHER OF STAINLESS STEEL.

730429
CASING AND TUBING OF A KIND USED IN DRILLING FOR OIL OR GAS, OF IRON (EXCEPT CAST IRON) OR STEEL.

730511
LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, LONGITUDINALLY SUBMERGED ARC WELDED.

730512
LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, LONGITUDINALLY WELDED NESOI.

730519
LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, RIVETED OR SIMILARLY CLOSED NESOI.

730520
CASING FOR OIL OR GAS DRILLING, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL.

730611
LINE PIPE FOR OIL OR GAS PIPELINES, WELDED, OF STAINLESS STEEL, NESOI.

730619
LINE PIPE FOR OIL OR GAS PIPELINES, OF IRON OR STEEL, NESOI.

731100
CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS, OF IRON OR STEEL.

761300
ALUMINUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS.

820713
ROCK DRILLING OR EARTH BORING TOOLS WITH WORKING PART OF CERMETS, AND PARTS THEREOF.

820719
INTERCHANGEABLE TOOLS FOR HANDTOOLS, WHETHER OR NOT POWER-OPERATED, OR FOR MACHINE-TOOLS, INCLUDING ROCK DRILLING OR EARTH BORING TOOLS; BASE METL PARTS.

841350
RECIPROCATING POSITIVE DISPLACEMENT PUMPS, NESOI.

841360
ROTARY POSITIVE DISPLACEMENT PUMPS, NESOI.

841382
LIQUID ELEVATORS.

841392
PARTS OF LIQUID ELEVATORS.

842139
FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR GASES, NESOI.

843049
BORING OR SINKING MACHINERY, NESOI, OTHER THAN SELF-PROPELLED.

843139
PARTS FOR LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY, NESOI.

843143
PARTS FOR BORING OR SINKING MACHINERY, NESOI.

847989
MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NESOI.

870520
MOBILE DRILLING DERRICKS.

870899
PARTS AND ACCESSORIES FOR MOTOR VEHICLES, NESOI.

890520
FLOATING OR SUBMERSIBLE DRILLING OR PRODUCTION PLATFORMS.

890590
LIGHT VESSELS, FIRE FLOATS, FLOATING CRANES AND OTHER VESSELS WITH NAVIGABILITY NOT THE MAIN FUNCTION, NESOI; FLOATING DOCKS.

8. Supplement no. 3 to part 746 is amended by revising the heading of the supplement and adding an entry for “Taiwan,” to the table in alphabetical order to read as follows:
Supplement No. 3 to Part 746—Countries Excluded From Certain License Requirements of §§ 746.7 and 746.8

Country
Scope

Federal Register
citation

*         *         *         *         *         *         *

Taiwan
Full
87 FR [INSERT FR PAGE NUMBER], 2/27/2023.

*         *         *         *         *         *         *

9. Supplement No. 4 to part 746 is revised to read as follows:
Supplement No. 4 to Part 746—Russian and Belarusian Industry Sector Sanctions Pursuant to § 746.5(a)(1)(ii)

(a) The source for the Harmonized Tariff Schedule (HTS)-6 codes and descriptions in this list comes from the United States International Trade Commission (USITC's) Harmonized Tariff Schedule of the United States (2023). The items described in supplement no. 4 to part 746 include any modified or designed “components,” “parts,” “accessories,” and “attachments” therefor regardless of the HTS Code or HTS Description of the “components,” “parts,” “accessories,” and “attachments,” apart from any “part” or minor “component” that is a fastener (
e.g.,
screw, bolt, nut, nut plate, stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet, bushing, spring, wire, or solder. This supplement includes two columns consisting of the HTS Code and HTS Description to assist exporters, reexporters, and transferors in identifying the products in this supplement. For information on HTS codes in general, you may contact a local import specialist at U.S. Customs and Border Protection at the nearest port. HTS-6 codes 841350, 841360, 842139, 843049, 843139, and 847989 are listed in both this supplement and supplement no. 2 to this part, so exporters, reexporters, and transferors must comply with the license requirements under both § 746.5(a)(1)(i) and (ii) as applicable.

(b) The items identified in the HTS-6 Code column of this supplement are subject to the license requirement under § 746.5(a)(1)(ii). The other column—HTS Description—is intended to assist exporters with their AES filing responsibilities. The license requirements extend to HTS Codes at the 8 and 10 digit level (HTS-8 and HTS-10 codes, respectively) when such longer HTS Codes begin with the HTS-6 Codes as their first 6 numbers.

HTS-6 code
HTS description

381519
SUPPORTED CATALYSTS, NESOI.

440810
VENEER SHEETS AND SHEETS FOR PLYWOOD, ETC. WHETHER OR NOT PLANED, ETC., NOT OVER 6 MM (.236 IN.) THICK, OF CONIFEROUS WOOD.

440890
VENEER SHEETS AND SHEETS FOR PLYWOOD, ETC. WHETHER OR NOT PLANED, ETC., NOT OVER 6 MM (.236 IN.) THICK, OF NONCONIFEROUS WOOD, NESOI.

441600
CASKS, BARRELS, VATS, TUBS AND OTHER COOPERS' PRODUCTS AND PARTS THEREOF, OF WOOD, INCLUDING STAVES.

720810
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF.

720825
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COILS, HOT-ROLLED WORKED ONLY, PICKLED, THICKNESS 4.75 MM OR MORE, NESOI.

720826
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COILS, HOT-ROLLED WORKED ONLY, PICKLED, 3 MM BUT <4.75 MM THICK, N.E.S.O.I.

720827
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH OF 600 MM OR MORE, IN COILS, HOT-ROLLED WORKED ONLY, PICKLED, LESS THAN 3 MM THICK, N.E.S.O.I.

720836
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH OF 600 MM OR MORE IN COILS, HOT-ROLLED WORKED ONLY, OF A THICKNESS EXCEEDING 10 MM, N.E.S.O.I.

720837
FLAT-ROLLED PRODUCTS OF IRN OR NONALLOY STEEL, WIDTH OF 600 MM OR MORE, IN COILS, HOT-ROLLED WORKED ONLY, OF A THICKNESS 4.75 MM BUT NOT OVER 10 MM NESOI.

720838
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS,HOT-ROLLED WORKED ONLY, OF A THICKNESS 3 MM OR MORE BUT UNDER 4.75 MM, NESOI.

720839
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS,HOT-ROLLED WORKED ONLY, OF A THICKNESS OF LESS THAN 3 MM, N.E.S.O.I.

720840
FLAT-ROLLED IRON OR NONALLOY STEEL, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COILS, PATTERNS IN RELIEF.

720851
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, NOT IN COILS, HOT-ROLLED WORKED ONLY, OF A THICKNESS EXCEEDING 10 MM, N.E.S.O.I.

720852
FLAT-ROLLED IRON OR NONALLOY STEEL, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED OR COILS, 4.75 MM TO 10 MM THICK.

720853
FLAT-ROLLED IRON OR NONALLOY STEEL, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED OR COILS, 3 MM TO UNDER 4.75 MM THICK.

720854
FLAT-ROLLED IRON OR NONALLOY STEEL, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED OR COILS, LESS THAN 3 MM THICK.

720890
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NESOI.

720915
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OF 3 MM OR MORE.

720916
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OVER ONE MM BUT LESS THAN 3 MM.

720917
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS 0.5 MM OR MORE BUT NOT OVER 1 MM.

720918
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OF LESS THAN 0.5 MM.

720925
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, NOT IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OF 3 MM OR MORE.

720926
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, NOT IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OVER 1 MM BUT LESS THAN 3 MM.

720927
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, NOT IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS 0.5 MM OR MORE BUT N/O 1 MM.

720928
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH 600 MM OR MORE, NOT IN COILS, COLD-ROLLED WORKED ONLY, OF A THICKNESS OF LESS THAN 0.5 MM.

720990
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, NESOI.

721011
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, PLATED OR COATED WITH TIN, 0.5 MM OR MORE THICK.

721012
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, PLATED OR COATED WITH TIN, UNDER 0.5 MM THICK.

721020
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, PLATED OR COATED WITH LEAD, INCLUDING TERNE-PLATE.

721030
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH OF 600 MM OR MORE, ELECTROLYTICALLY PLATED OR COATED WITH ZINC.

721041
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, CORRUGATED, 600 MM OR MORE WIDE, PLATED OR COATED WITH ZINC OTHER THAN ELECTROLYTICALLY.

721049
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, NOT CORRUGATED, 600 MM OR MORE WIDE, PLATED OR COATED WITH ZINC OTHER THAN ELECTROLYTICALLY.

721050
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, PLATED OR COATED WITH CHROMIUM OXIDES OR WITH CHROMIUM AND CHROMIUM OXIDES.

721061
FLAT-ROLLED IRON OR NONALLOY STEEL 600 MM OR MORE, PLATED OR COATED WITH ALUMINUM-ZINC ALLOYS.

721069
FLAT-ROLLED IRON OR NONALLOY STEEL 600 MM OR MORE, PLATED OR COATED WITH OTHER ALUMINUM.

721070
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, 600 MM OR MORE WIDE, PAINTED, VARNISHED OR COATED WITH PLASTICS.

721119
FLAT-ROLLED HIGH-STRENGTH NONALLLOY STEEL PRODUCTS NESOI, UNDER 600 MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, UNDER 4.75 MM THICK.

721123
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH LESS THAN 600 MM, NOT FURTHER WORKED THAN COLD-ROLLED, NOT CLAD, PLATED OR COATED, <0.25% CARBON.

721190
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, UNDER 600 MM WIDE, NOT CLAD, PLATED OR COATED, NESOI.

721220
FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY STEEL, WIDTH OF LESS THAN 600 MM, ELECTROLYTICALLY PLATED OR COATED WITH ZINC.

721230
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, UNDER 600 MM WIDE, PLATED OR COATED WITH ZINC OTHER THAN ELECTROLYTICALLY.

721240
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, UNDER 600 MM WIDE, PAINTED, VARNISHED OR COATED WITH PLASTICS.

721250
FLAT-ROLLED IRON OR NONALLOY STEEL PRODUCTS, UNDER 600 MM WIDE, PLATED OR COATED, NESOI.

721911
FLAT-ROLLED STAINLESS STEEL IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, OVER 10 MM THICK.

721912
FLAT-ROLLED STAINLESS STEEL IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, 4.75 MM BUT NOT OVER 10 MM THICK.

721913
FLAT-ROLLED STAINLESS STEEL IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, 3 MM BUT UNDER 4.75 MM THICK.

721914
FLAT-ROLLED STAINLESS STEEL IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, UNDER 3 MM THICK.

721921
FLAT-ROLLED STAINLESS STEEL NOT IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, OVER 10 MM THICK.

721922
FLAT-ROLLED STAINLESS STEEL NOT IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, 4.75 MM BUT NOT OVER 10 MM THICK.

721923
FLAT-ROLLED STAINLESS STEEL NOT IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, 3 MM BUT UNDER 4.75 MM THICK.

721924
FLAT-ROLLED STAINLESS STEEL NOT IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, UNDER 3 MM THICK.

721931
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, 4.75 MM OR MORE THICK.

721932
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, 3 MM BUT UNDER 4.75 MM THICK.

721933
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, OVER 1 MM BUT UNDER 3 MM THICK.

721934
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, 0.5 MM BUT NOT OVER 1 MM THICK.

721935
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, UNDER 0.5 MM THICK.

721990
FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600 MM OR MORE WIDE, NESOI.

722011
FLAT-ROLLED STAINLESS STEEL PRODUCTS, UNDER 600 MM WIDE, HOT-ROLLED, 4.75 MM OR MORE THICK.

722012
FLAT-ROLLED STAINLESS STEEL PRODUCTS, UNDER 600 MM WIDE, HOT-ROLLED, UNDER 4.75 MM THICK.

722020
FLAT-ROLLED STAINLESS STEEL PRODUCTS, UNDER 600 MM WIDE, COLD-ROLLED.

722090
FLAT-ROLLED STAINLESS STEEL PRODUCTS, UNDER 600 MM WIDE, NESOI.

722511
FLAT-ROLLED SILICON ELECTRICAL STEEL 600 MM OR MORE WIDE, GRAIN-ORIENTED.

722540
FLAT-ROLLED ALLOY STEEL (OTHER THAN STAINLESS) NOT IN COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NESOI.

722550
FLAT-ROLLED ALLOY STEEL (OTHER THAN STAINLESS) PRODUCTS, 600 MM OR MORE WIDE, COLD-ROLLED, NESOI.

722591
FLAT-ROLLED ALLOY STEEL NESOI, 600 MM OR MORE WIDE, ELECTROLYTICALLY PLATED OR COATED WITH ZINC.

722592
FLAT-ROLLED ALLOY STEEL NESOI 600 MM OR MORE WIDE PLATED OR COATED WITH ZINC, NOT ELECTROLYTICALLY.

722611
FLAT-ROLLED SILICON ELECTRICAL STEEL UNDER 600 MM WIDE, GRAIN-ORIENTED.

722619
FLAT-ROLLED SILICON ELECTRICAL STEEL UNDER 600 MM WIDE, NOT GRAIN-ORIENTED.

722620
FLAT-ROLLED HIGH-SPEED STEEL PRODUCTS, UNDER 600 MM WIDE.

722692
FLAT-ROLLED ALLOY STEEL (OTHER THAN STAINLESS) PRODUCTS, UNDER 600 MM WIDE, COLD-ROLLED, NESOI.

722699
FLAT-ROLLED ALLOY STEEL (OTHER THAN STAINLESS) PRODUCTS, UNDER 600 MM WIDE, NESOI.

730810
BRIDGES AND BRIDGE SECTIONS OF IRON OR STEEL.

730820
TOWERS AND LATTICE MASTS OF IRON OR STEEL.

730830
DOORS, WINDOWS AND FRAMES AND THRESHOLDS FOR DOORS, OF IRON OR STEEL.

730840
EQUIPMENT FOR SCAFFOLDING, SHUTTERING PROPPING OR PIT-PROPPING, OF IRON OR STEEL.

730890
STRUCTURES AND PARTS OF STRUCTURES NESOI, OF IRON OR STEEL.

730900
RESERVOIRS, TANKS, CASKS, VATS AND SIMILAR CONTAINERS NESOI, OF A CAPACITY OF MORE THAN 300 LITERS (79.25 GAL.), OF IRON OR STEEL.

731010
TANKS, DRUMS, CANS, AND SIMILAR PLAIN CONTAINERS, A CAPACITY OF 50 LITERS (13.21 GAL.) OR MORE, BUT NOT OVER 300 LITERS (79.25 GAL.), OF IRON OR STEEL.

731021
CANS, PLAIN, UNFITTED, OF A CAPACITY OF LESS THAN 50 LITERS (13.21 GAL.), WHICH WILL BE CLOSED BY SOLDERING OR CRIMPING, OF IRON OR STEEL.

731029
TANKS, CASKS, DRUMS, CANS, BOXES AND SIMILAR PLAIN, UNFITTED CONTAINERS NESOI, OF A CAPACITY OF LESS THAN 50 LITERS (13.21 GAL.), OF IRON OR STEEL.

761010
ALUMINUM DOORS, WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS.

761090
ALUMINUM STRUCTURES AND PARTS OF STRUCTURES, NESOI.

761210
ALUMINUM COLLAPSIBLE TUBULAR CONTAINERS, OF A CAPACITY NOT OVER 300 LITERS (79.30 GAL.).

820760
TOOLS FOR BORING OR BROACHING, AND PARTS THEREOF, OF BASE METAL.

820810
KNIVES AND CUTTING BLADES FOR METAL WORKING, AND PARTS THEREOF, OF BASE METAL.

820820
KNIVES AND CUTTING BLADES FOR WOOD WORKING, AND PARTS THEREOF, OF BASE METAL.

820830
KNIVES AND CUTTING BLADES FOR KITCHEN APPLIANCES OR FOR MACHINES USED BY THE FOOD INDUSTRY, AND PARTS THEREOF, OF BASE METAL.

820840
KNIVES AND CUTTING BLADES FOR AGRICULTURAL OR FORESTRY MACHINES, AND PARTS THEREOF, OF BASE METAL.

820890
KNIVES AND CUTTING BLADES FOR MACHINES OR MECHANICAL APPLIANCES NESOI, AND PARTS THEREOF, OF BASE METAL.

840212
WATERTUBE BOILERS WITH A STEAM PRODUCTION NOT EXCEEDING 45 T PER HOUR.

840219
VAPOR GENERATING BOILERS, NESOI, INCLUDING HYBRID BOILERS.

840220
SUPER-HEATED WATER BOILERS.

840290
PARTS FOR SUPER-HEATED WATER BOILERS AND STEAM OR OTHER VAPOR GENERATION BOILERS (OTHER THAN CENTRAL HEATING HOT WATER BOILERS).

840410
AUXILIARY PLANT FOR USE WITH STEAM OR OTHER VAPOR GENERATING BOILERS, SUPER-HEATED WATER BOILERS AND CENTRAL HEATING BOILERS.

840420
CONDENSERS FOR STEAM OR OTHER VAPOR POWER UNITS.

840490
PARTS FOR AUXILIARY PLANT FOR USE WITH STEAM OR OTHER VAPOR GENERATING BOILERS AND CONDENSER POWER UNITS, SUPER-HEATED AND CENTRAL HEATING BOILERS.

840510
PRODUCER GAS AND WATER GAS GENERATORS, ACTYLENE GAS AND SIMILAR WATER PROCESS GAS GENERATORS, WITH OR WITHOUT THEIR PURIFIERS.

840590
PARTS FOR PRODUCER GAS AND WATER GAS GENERATORS, ACTYLENE GAS AND SIMILAR PROCESS GAS GENERATORS.

840681
TURBINES, STEAM AND OTHER VAPOR TYPES, OF AN OUTPUT EXCEEDING 40 MW, EXCEPT FOR MARINE PROPULSION.

840682
TURBINES, STEAM AND OTHER VAPOR TYPES, OF AN OUTPUT NOT EXCEEDING 40 MW, EXCEPT FOR MARINE PROPULSION.

840690
PARTS FOR STEAM AND OTHER VAPOR TURBINES.

840721
OUTBOARD ENGINES FOR MARINE PROPULSION.

840729
INBOARD ENGINES FOR MARINE PROPULSION.

840810
MARINE COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINES (DIESEL OR SEMI-DIESEL ENGINES).

840820
COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINES (DIESEL OR SEMI-DIESEL), FOR THE PROPULSION OF VEHICLES EXCEPT RAILWAY OR TRAMWAY STOCK.

840890
COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINES (DIESEL OR SEMI-DIESEL ENGINES), NESOI.

840999
PARTS FOR USE WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINES, NESOI.

841090
PARTS, INCLUDING REGULATORS, FOR HYDRAULIC TURBINES AND WATER WHEELS.

841111
TURBOJETS OF A THRUST NOT EXCEEDING 25 KN.

841112
TURBOJETS OF A THRUST EXCEEDING 25 KN.

841121
TURBOPROPELLERS OF A POWER NOT EXCEEDING 1,100 KW.

841122
TURBOPROPELLERS OF A POWER EXCEEDING 1,100 KW.

841191
PARTS OF TURBOJETS OR TURBOPROPELLERS.

841210
REACTION ENGINES OTHER THAN TURBOJETS.

841221
HYDRAULIC POWER ENGINES AND MOTORS, LINEAR ACTING (CYLINDERS).

841229
HYDRAULIC POWER ENGINES AND MOTORS, EXCEPT LINEAR ACTING (CYLINDERS).

841239
PNEUMATIC POWER ENGINES AND MOTORS, EXCEPT LINEAR ACTING (CYLINDERS).

841280
ENGINES AND MOTORS, NESOI.

841311
PUMPS FOR DISPENSING FUEL OR LUBRICANTS, OF A TYPE USED IN FILLING-STATIONS OR GARAGES.

841319
PUMPS FITTED OR DESIGNED TO BE FITTED WITH A MEASURING DEVISE, NESOI.

841330
FUEL, LUBRICATING OR COOLING MEDIUM PUMPS FOR INTERNAL COMBUSTION PISTON ENGINES.

841350
RECIPROCATING POSITIVE DISPLACEMENT PUMPS, NESOI.

841360
ROTARY POSITIVE DISPLACEMENT PUMPS, NESOI.

841381
PUMPS FOR LIQUIDS, NESOI.

841410
VACUUM PUMPS.

841490
PARTS FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; PARTS OF VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, NESOI.

841520
AUTOMOTIVE AIR CONDITIONERS.

841583
AIR CONDITIONING MACHINES NESOI, NOT INCORPORATING A REFRIGERATING UNIT.

841610
FURNACE BURNERS FOR LIQUID FUEL.

841620
FURNACE BURNERS FOR PULVERIZED SOLID FUEL OR FOR GAS, INCLUDING COMBINATION BURNERS.

841630
MECHANICAL STOKERS INCLUDING THEIR MECHANICAL GRATES, MECHANICAL ASH DISCHARGERS AND SIMILAR APPLIANCES.

841690
PARTS OF FURNACE BURNERS FOR LIQUID FUEL, PULVERIZED SOLID FUEL OR GAS; PARTS OF MECHANICAL STOKERS, GRATES, ASH DISCHARGERS AND SIMILAR APPLIANCES.

841720
BAKERY OVENS, INCLUDING BISCUIT OVENS, NONELECTRIC.

841861
COMPRESSION TYPE HEAT PUMP UNITS WHOSE CONDENSERS ARE HEAT EXCHANGERS (EXCLUDING REVERSIBLE HEAT PUMPS CAPABLE OF CHANGING TEMPERATURE AND HUMIDITY).

841869
REFRIGERATING OR FREEZING EQUIPMENT, NESOI.

841919
INSTANTANEOUS OR STORAGE WATER HEATERS, EXCEPT INSTANTANEOUS GAS WATER HEATERS, NONELECTRIC.

841940
DISTILLING OR RECTIFYING PLANT.

841950
HEAT EXCHANGE UNITS, INDUSTRIAL TYPE.

841960
MACHINERY FOR LIQUEFYING AIR OR OTHER GASES.

841989
MACHINERY, PLANT OR LABORATORY EQUIPMENT FOR THE TREATMENT OF MATERIAL INVOLVING TEMPERATURE CHANGE (EXCEPT DOMESTIC MACHINERY), NESOI.

841990
PARTS FOR MACHINERY, PLANT OR LABORATORY EQUIPMENT FOR THE TREATMENT OF MATERIAL INVOLVING TEMPERATURE CHANGE (EXCEPT DOMESTIC MACHINERY), NESOI.

842091
CYLINDERS FOR CALENDERING OR OTHER ROLLING MACHINES, OTHER THAN FOR METALS OR GLASS.

842099
PARTS, EXCEPT CYLINDERS, FOR CALENDERING OR OTHER ROLLING MACHINES, OTHER THAN FOR METALS OR GLASS.

842111
CREAM SEPARATORS, CENTRIFUGAL.

842119
CENTRIFUGES, INCLUDING CENTRIFUGAL DRYERS (OTHER THAN CLOTHES DRYERS), NESOI.

842123
OIL OR FUEL FILTERS FOR INTERNAL COMBUSTION ENGINES.

842129
FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR LIQUIDS, NESOI.

842131
INTAKE AIR FILTERS FOR INTERNAL COMBUSTION ENGINES.

842139
FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR GASES, NESOI.

842191
PARTS OF CENTRIFUGES, INCLUDING CENTRIFUGAL DRYERS.

842199
PARTS FOR FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR LIQUIDS OR GASES.

842410
FIRE EXTINGUISHERS, WHETHER OR NOT CHARGED.

842489
MECHANICAL APPLIANCES FOR PROJECTING, DISPERSING OR SPRAYING LIQUIDS OR POWDERS, NESOI.

842490
PARTS FOR MECHANICAL APPLIANCES FOR PROJECTING, DISPERSING OR SPRAYING, FIRE EXTINGUISHERS, SPRAY GUNS, AND STEAM OR SAND BLASTING MACHINES.

842511
PULLEY TACKLE AND HOISTS, OTHER THAN SKIP HOISTS OR HOISTS OF A KIND USED FOR RAISING VEHICLES, POWERED BY ELECTRIC MOTOR.

842531
WINCHES AND CAPSTANS POWERED BY ELECTRIC MOTORS.

842611
OVERHEAD TRAVELING CRANES ON FIXED SUPPORT.

842612
MOBILE LIFTING FRAMES ON TIRES AND STRADDLE CARRIERS.

842619
OVERHEAD TRAVELING CRANES, TRANSPORTER CRANES, GANTRY AND BRIDGE CRANES, MOBILE LIFTING FRAMES AND STRADDLE CARRIES, NESOI.

842620
TOWER CRANES.

842630
PORTAL OR PEDESTAL JIB CRANES.

842641
DERRICKS, CRANES, NESOI AND WORKS TRUCKS FITTED WITH A CRANE, SELF-PROPELLED, ON TIRES.

842649
DERRICKS, CRANES, NESOI AND WORKS TRUCKS FITTED WITH A CRANE, SELF-PROPELLED, NOT ON TIRES.

842691
LIFTING OR HANDLING MACHINERY DESIGNED FOR MOUNTING ON ROAD VEHICLES.

842699
LIFTING OR HANDLING MACHINERY, NESOI.

842710
SELF-PROPELLED LIFTING OR HANDLING TRUCKS POWERED BY AN ELECTRIC MOTOR.

842720
SELF-PROPELLED LIFTING OR HANDLING TRUCKS POWERED BY OTHER THAN AN ELECTRIC MOTOR.

842790
FORK-LIFT AND OTHER WORKS TRUCKS FITTED WITH LIFTING OR HANDLING EQUIPMENT, OTHER THAN SELF-PROPELLED, NESOI.

842820
PNEUMATIC ELEVATORS AND CONVEYORS.

842831
CONTINUOUS-ACTION ELEVATORS AND CONVEYORS, FOR GOODS OR MATERIALS, SPECIALLY DESIGNED FOR UNDERGROUND USE.

842832
CONTINUOUS-ACTION ELEVATORS AND CONVEYORS, FOR GOODS OR MATERIALS, OTHER THAN FOR UNDERGROUND USE, BUCKET TYPE.

842833
CONTINUOUS-ACTION ELEVATORS AND CONVEYORS, FOR GOODS OR MATERIALS, OTHER THAN FOR UNDERGROUND USE, BELT TYPE.

842839
CONTINUOUS-ACTION ELEVATORS AND CONVEYORS, FOR GOODS OR MATERIALS, OTHER THAN FOR UNDERGROUND USE, NESOI.

842870
LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY NESOI.

842890
LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY NESOI.

842911
BULLDOZERS AND ANGLEDOZERS, SELF-PROPELLED, TRACK LAYING.

842919
BULLDOZERS AND ANGLEDOZERS, SELF-PROPELLED, OTHER THAN TRACK LAYING.

842920
GRADERS AND LEVELERS, SELF-PROPELLED.

842930
SCRAPERS, SELF-PROPELLED.

842940
TAMPING MACHINES AND ROAD ROLLERS, SELF-PROPELLED.

842951
MECHANICAL FRONT-END SHOVEL LOADERS, SELF-PROPELLED.

842952
MECHANICAL SHOVELS, EXCAVATORS AND SHOVEL LOADERS WITH 360 DEGREE REVOLVING SUPERSTRUCTURE, SELF-PROPELLED.

842959
MECHANICAL SHOVELS, EXCAVATORS AND SHOVEL LOADERS NESOI, SELF-PROPELLED.

843010
PILE-DRIVERS AND PILE-EXTRACTORS.

843039
COAL OR ROCK CUTTERS AND TUNNELING MACHINERY, OTHER THAN SELF-PROPELLED.

843049
BORING OR SINKING MACHINERY, NESOI, OTHER THAN SELF-PROPELLED.

843050
MOVING, GRADING, LEVELING, SCRAPING, EXCAVATING, TAMPING, COMPACTING OR EXTRACTING MACHINERY FOR EARTH, MINERALS OR ORES, NESOI, SELF-PROPELLED.

843069
MOVING, GRADING, LEVELING, EXCAVATING, EXTRACTING MACHINERY FOR EARTH, MINERALS OR ORES, NESOI, NOT SELF-PROPELLED.

843120
PARTS FOR FORK-LIFT TRUCKS AND OTHER WORKS TRUCKS FITTED WITH LIFTING OR HANDLING EQUIPMENT.

843139
PARTS FOR LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY, NESOI.

843141
BUCKETS, SHOVELS, GRABS AND GRIPS FOR DERRICKS, CRANES, BULLDOZERS, ANGLEDOZERS, GRADERS, SCRAPERS, BORERS, EXTRACTING, ETC. MACHINERY.

843149
PARTS AND ATTACHMENTS, NESOI, FOR DERRICKS, CRANES, SELF-PROPELLED BULLDOZERS, GRADERS ETC. AND OTHER GRADING, SCRAPING, ETC. MACHINERY.

843910
MACHINERY FOR MAKING PULP OF FIBROUS CELLULOSIC MATERIAL.

843930
MACHINERY FOR FINISHING PAPER OR PAPERBOARD.

844090
PARTS FOR BOOKBINDING MACHINERY, INCLUDING PARTS FOR BOOK-SEWING MACHINES.

844130
MACHINES FOR MAKING PAPER CARTONS, BOXES, CASES, DRUMS AND SIMILAR CONTAINERS, OTHER THAN BY MOLDING.

844230
MACHINERY, APPARATUS AND EQUIPMENT, NESOI, FOR PREPARING OR MAKING PRINTING BLOCKS, PLATES, CYLINDERS OR OTHER PRINTING COMPONENTS.

844240
PARTS OF MACHINERY, APPARATUS AND EQUIPMENT, NESOI, FOR TYPESETTING ETC. AND PREPARING OR MAKING PRINTING BLOCKS OR OTHER PRINTING COMPONENTS.

844311
OFFSET PRINTING MACHINERY, REEL-FED.

844313
OFFSET PRINTING MACHINERY, NESOI.

844315
LETTERPRESS PRINTING MACHINERY, OTHER THAN REEL FED, EXCLUDING FLEXOGRAPHIC PRINTING.

844316
FLEXOGRAPHIC PRINTING MACHINERY.

844317
GRAVURE PRINTING MACHINERY.

844319
OFFSET PRINTING MACHINERY, NESOI.

844391
PARTS AND ACCESSORIES OF PRINTING MACHINERY USED FOR PRINTING BY MEANS OF PLATES, CYLINDERS AND OTHER PRINTING COMPONENTS OF HEAD. 8442.

844400
MACHINES FOR EXTRUDING, DRAWING, TEXTURING OR CUTTING MANMADE TEXTILE MATERIALS.

844621
POWER LOOMS FOR WEAVING FABRICS OF A WIDTH EXCEEDING 30 CM, SHUTTLE TYPE.

844629
WEAVING MACHINES (LOOMS) FOR WEAVING FABRICS OF A WIDTH EXCEEDING 30 CM, SHUTTLE TYPE, NESOI.

844811
AUXILIARY MACHINERY FOR TEXTILE MACHINES (HEADINGS 8444 TO 8447), DOBBIES AND JACQUARDS, CARD REDUCING, COPYING, PUNCHING OR ASSEMBLING MACHINES.

844819
AUXILIARY MACHINERY FOR TEXTILE MACHINES (HEADINGS 8444 TO 8447), NESOI.

844820
PARTS AND ACCESSORIES FOR MACHINES FOR EXTRUDING, DRAWING, TEXTURING OR CUTTING MANMADE TEXTILE MATERIALS, OR OF THEIR AUXILIARY MACHINERY.

844833
SPINDLES, SPINDLE FLYERS, SPINNING RINGS AND RING TRAVELLERS, FOR MACHINERY USED FOR PREPARING OR PRODUCING TEXTILE YARNS, ETC.

844839
PARTS AND ACCESSORIES FOR TEXTILE SPINNING, DOUBLING OR TWISTING, WINDING OR REELING AND YARN PRODUCING MACHINES, ETC., NESOI.

844842
REEDS FOR LOOMS, HEALDS AND HEALD-FRAMES.

844849
PARTS AND ACCESSORIES OF WEAVING MACHINES (LOOMS) OR OF THEIR AUXILIARY MACHINERY, NESOI.

844851
SINKERS, NEEDLES AND OTHER ARTICLES USED IN FORMING STITCHES FOR KNITTING MACHINES, STITCH-BONDING AND GIMPED YARN ETC. MACHINES.

845110
DRY-CLEANING MACHINES FOR TEXTILES YARNS, FABRICS OR MADE UP TEXTILE ARTICLES.

845129
DRYING MACHINES (EXCEPT CENTRIFUGAL TYPE) FOR TEXTILE YARNS, FABRICS OR MADE UP TEXTILE ARTICLES, WITH A DRY LINEN CAPACITY EXCEEDING 10 KG.

845130
IRONING MACHINES AND PRESSES (INCLUDING FUSING PRESSES) FOR TEXTILE YARNS, FABRICS OR MADE UP TEXTILE ARTICLES.

845190
PARTS FOR MACHINERY FOR WASHING, CLEANING, WRINGING ETC. TEXTILE YARNS AND FABRICS, APPLYING PASTE TO BASE FABRIC ETC. AND REELING ETC. TEXTILE FABRIC.

845230
SEWING MACHINE NEEDLES.

845310
MACHINES FOR PREPARING, TANNING OR WORKING HIDES, SKINS OR LEATHER.

845380
MACHINERY (OTHER THAN SEWING MACHINES), FOR MAKING OR REPAIRING ARTICLES OF HIDES, SKINS OR LEATHER, EXCEPT FOOTWEAR.

845390
PARTS OF MACHINERY (EXCEPT SEWING MACHINES) FOR TANNING ETC. HIDES, SKINS OR LEATHER OR FOR MAKING OR REPAIRING ARTICLES OF HIDES, SKINS OR LEATHER.

845410
CONVERTERS USED IN METALLURGY OR METAL FOUNDRIES.

845420
INGOT MOLDS AND LADLES USED IN METALLURGY OR METAL FOUNDRIES.

845490
PARTS FOR CONVERTERS, LADLES, INGOT MOLDS AND CASTING MACHINES USED IN METALLURGY OR METAL FOUNDRIES.

845522
COLD METAL-ROLLING MILLS, EXCEPT TUBE MILLS.

845530
ROLLS FOR METAL-ROLLING MILLS.

845620
MACHINE TOOLS FOR WORKING ANY MATERIAL BY REMOVAL OF MATERIAL, BY ULTRASONIC PROCESSES.

845640
MACHINE TOOLS FOR WORKING ANY MATERIAL BY REMOVAL OF MATERIAL OPERATED BY PLASMA ARC PROCESSES.

845690
MACHINE TOOLS FOR REMOVAL OF MATERIAL BY ELECTRO-CHEMICAL, ELECTRON-BEAM, IONIC-BEAM OR PLASMA ARC PROCESSES, N.E.S.O.I.

845710
MACHINING CENTERS FOR WORKING METAL.

845730
MULTISTATION TRANSFER MACHINES FOR WORKING METAL.

845811
HORIZONTAL LATHES FOR REMOVING METAL, NUMERICALLY CONTROLLED.

845819
HORIZONTAL LATHES FOR REMOVING METAL, NOT NUMERICALLY CONTROLLED.

845891
LATHES, EXCLUDING HORIZONTAL, FOR REMOVING METAL, NUMERICALLY CONTROLLED.

845899
LATHES, EXCLUDING HORIZONTAL, FOR REMOVING METAL, NOT NUMERICALLY CONTROLLED.

845910
WAY-TYPE UNIT HEAD MACHINES FOR REMOVING METAL.

845921
DRILLING MACHINES FOR REMOVING METAL NESOI, NUMERICALLY CONTROLLED.

845931
BORING-MILLING MACHINES FOR REMOVING METAL NESOI, NUMERICALLY CONTROLLED.

845941
NUMERICALLY CONTROLLED BORING MACHINES, NESOI.

845949
OTHER BORING MACHINES, NESOI.

845961
MILLING MACHINES, NOT KNEE TYPE, FOR REMOVING METAL, NUMERICALLY CONTROLLED.

845970
THREADING OR TAPPING MACHINES, FOR REMOVING METAL.

846012
FLAT-SURFACE GRINDING MACHINES, NUMERICALLY CONTROLLED.

846019
FLAT-SURFACE GRINDING MACHINES FOR REMOVING METAL, AXIS ACCURACY OF 0.01 MM OR MORE, NOT NUMERICALLY CONTROLLED.

846022
CENTERLESS GRINDING MACHINES, NUMERICALLY CONTROLLED.

846023
OTHER CYLINDRICAL GRINDING MACHINES, NUMERICALLY CONTROLLED.

846024
OTHER GRINDING MACHINES, NESOI, NUMERICALLY CONTROLLED.

846029
GRINDING MACHINES FOR REMOVING METAL, EXCEPT FLAT-SURFACE, AXIS ACCURACY OF 0.01 MM OR MORE, NOT NUMERICALLY CONTROLLED.

846031
SHARPENING (TOOL OR CUTTER GRINDING) MACHINES FOR REMOVING METAL, NUMERICALLY CONTROLLED.

846039
SHARPENING (TOOL OR CUTTER GRINDING) MACHINES FOR REMOVING METAL, NOT NUMERICALLY CONTROLLED.

846040
HONING OR LAPPING MACHINES FOR REMOVING METAL.

846090
MACHINE TOOLS FOR DEBURRING, POLISHING METAL, SINTERED METAL CARBIDES, ABRASIVES OR POLISHING PRODUCTS, OTHER THAN GEAR CUTTING, ETC., NESOI.

846120
SHAPING OR SLOTTING MACHINES FOR REMOVING METAL.

846130
BROACHING MACHINES FOR REMOVING METAL.

846140
GEAR CUTTING, GEAR GRINDING OR GEAR FINISHING MACHINES.

846150
SAWING OR CUTTING-OFF MACHINES FOR REMOVING METAL.

846190
MACHINE TOOLS WORKING BY REMOVING METAL, SINTERED METAL CARBIDES OR CERMETS, NESOI.

846211
FORGING OR DIE-STAMPING MACHINES (INCLUDING PRESSES) AND HAMMERS FOR WORKING METAL.

846219
FORGING OR DIE-STAMPING MACHINES (INCLUDING PRESSES) AND HAMMERS FOR WORKING METAL.

846222
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NOT NUMERICALLY CONTROLLED.

846223
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NUMERICALLY CONTROLLED.

846224
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NUMERICALLY CONTROLLED.

846225
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NUMERICALLY CONTROLLED.

846226
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NUMERICALLY CONTROLLED.

846229
BENDING, FOLDING, STRAIGHTENING OR FLATTENING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, NOT NUMERICALLY CONTROLLED.

846232
SHEARING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, OTHER THAN COMBINED PUNCHING AND SHEARING MACHINES, NUMERICALLY CONTROLLED.

846233
SHEARING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, OTHER THAN COMBINED PUNCHING AND SHEARING MACHINES, NUMERICALLY CONTROLLED.

846239
SHEARING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, OTHER THAN COMBINED PUNCHING AND SHEARING MACHINES, NOT NUMERICALLY CONTROLLED.

846242
PUNCHING OR NOTCHING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, INCLUDING COMBINED PUNCHING AND SHEARING MACHINES, NUMERICALLY CONTROLLED.

846249
PUNCHING OR NOTCHING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, INCLUDING COMBINED PUNCHING AND SHEARING MACHINES, NOT NUMERICALLY CONTROLLED.

846251
PUNCHING OR NOTCHING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, INCLUDING COMBINED PUNCHING AND SHEARING MACHINES, NUMERICALLY CONTROLLED.

846259
PUNCHING OR NOTCHING MACHINES (INCLUDING PRESSES) FOR WORKING METAL, INCLUDING COMBINED PUNCHING AND SHEARING MACHINES, NOT NUMERICALLY CONTROLLED.

846261
HYDRAULIC PRESSES FOR WORKING METAL.

846262
MACHINE TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY FORGING, HAMMERING, DIE-CASTING, BENDING, FOLDING, FLATTENING, WORKING METAL CARBIDES, NESOI.

846263
MACHINE TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY FORGING, HAMMERING, DIE-CASTING, BENDING, FOLDING, FLATTENING, WORKING METAL CARBIDES, NESOI.

846269
MACHINE TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY FORGING, HAMMERING, DIE-CASTING, BENDING, FOLDING, FLATTENING, WORKING METAL CARBIDES, NESOI.

846290
MACHINE TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY FORGING, HAMMERING, DIE-CASTING, BENDING, FOLDING, FLATTENING, WORKING METAL CARBIDES, NESOI.

846310
DRAW-BENCHES FOR BARS, TUBES, PROFILES, WIRE OR THE LIKE FOR WORKING METAL WITHOUT REMOVING MATERIAL.

846320
THREAD ROLLING MACHINES FOR WORKING METAL WITHOUT REMOVING MATERIAL.

846330
MACHINES FOR WORKING WIRE WITHOUT REMOVING MATERIAL.

846390
MACHINE TOOLS FOR WORKING METAL, SINTERED METAL CARBIDES OR CERMETS, WITHOUT REMOVING MATERIAL, NESOI.

846410
SAWING MACHINES FOR WORKING STONE, CERAMICS, CONCRETE, ASBESTOS-CEMENT OR LIKE MINERAL MATERIALS OR FOR COLD WORKING GLASS.

846420
GRINDING OR POLISHING MACHINES FOR WORKING STONE, CERAMICS, CONCRETE, ASBESTOS-CEMENT OR LIKE MINERAL MATERIALS OR FOR COLD WORKING GLASS.

846490
MACHINE TOOLS FOR WORKING STONE, CERAMICS, CONCRETE, ASBESTOS-CEMENT OR LIKE MINERAL MATERIALS OR FOR COLD WORKING GLASS, NESOI.

846520
MACHINING CENTERS FOR WORKING CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILIAR HARD MATERALS.

846593
GRINDING, SANDING OR POLISHING MACHINES FOR WORKING WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILAR HARD MATERIALS.

846594
BENDING OR ASSEMBLING MACHINES FOR WORKING WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILAR HARD MATERIALS.

846596
SPLITTING, SLICING OR PARING MACHINES FOR WORKING WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILAR HARD MATERIALS.

846610
TOOL HOLDERS AND SELF-OPENING DIEHEADS FOR MACHINES OR ANY TYPE OF TOOL FOR WORKING IN THE HAND.

846620
WORK HOLDERS FOR MACHINE TOOLS.

846691
PARTS AND ACCESSORIES FOR MACHINE TOOLS FOR WORKING STONE, CERAMICS, CONCRETE, ASBESTOS-CEMENT OR LIKE MATERIALS OR FOR COLD WORKING GLASS, NESOI.

846692
PARTS AND ACCESSORIES FOR MACHINE TOOLS FOR WORKING WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILAR HARD MATERIALS, NESOI.

846693
PARTS AND ACCESSORIES FOR MACHINE TOOLS, FOR LASER OPERATION, METALWORKING MACHINING CENTERS, LATHES AND DRILLING MACHINES, ETC., NESOI.

846694
PARTS AND ACCESSORIES FOR MACHINES TOOLS, FOR FORGING, DIE-STAMPING, SHEARING, ETC. METAL AND THOSE FOR WORKING METAL WITHOUT REMOVING MATERIAL, NESOI.

846810
HAND-HELD BLOW TORCHES.

846820
GAS OPERATED MACHINERY AND APPARATUS FOR SOLDERING, BRAZING OR WELDING, OTHER THAN HAND-HELD BLOW TORCHES.

846880
MACHINERY AND APPARATUS FOR SOLDERING, BRAZING OR WELDING, NESOI.

846890
PARTS OF MACHINERY AND APPARATUS FOR SOLDERING, BRAZING OR WELDING, NESOI.

847210
DUPLICATING MACHINES.

847230
MACHINES FOR SORTING OR FOLDING MAIL, FOR INSERTING MAIL IN ENVELOPES, OR FOR OPENING OR SEALING MAIL AND MACHINES FOR AFFIXING OR CANCELLING POSTAGE.

847321
PARTS AND ACCESSORIES FOR ELECTRONIC CALCULATORS AND CALCULATING MACHINES.

847330
PARTS AND ACCESSORIES FOR AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF, MAGNETIC OR OPTICAL READERS, TRANSCRIBING MACHINES, ETC., NESOI.

847410
MACHINES FOR SORTING, SCREENING, SEPARATING OR WASHING EARTH, STONE, ORE OR OTHER MINERAL SUBSTANCES, IN SOLID FORM.

847431
CONCRETE OR MORTAR MIXERS.

847439
MACHINES FOR MIXING OR KNEADING EARTH, STONE, ORE OR OTHER MINERAL SUBSTANCES IN SOLID FORM, NESOI.

847480
MACHINERY FOR AGGLOMERATING ETC. SOLID MINERAL FUELS, CERAMIC PASTE OR OTHER MINERAL PRODUCTS; MACHINES FOR FORMING FOUNDRY MOLDS OF SAND.

847521
MACHINES FOR MAKING OPTICAL FIBERS AND PREFORMS THEREOF.

847529
MACHINES FOR MANUFACTURING OR HOT WORKING GLASS OR GLASSWARE, NESOI.

847590
PARTS OF MACHINES FOR ASSEMBLING ELECTRIC OR ELECTRONIC LAMPS, TUBES ETC., IN GLASS ENVELOPES AND FOR MANUFACTURING OR HOT WORKING GLASS OR GLASSWARE.

847730
BLOW-MOLDING MACHINES FOR WORKING RUBBER OR PLASTIC.

847740
VACUUM-MOLDING MACHINES AND OTHER THERMOFORMING MACHINES, FOR MOLDING OR FORMING RUBBER OR PLASTICS.

847751
MACHINERY FOR MOLDING OR RETREADING PNEUMATIC TIRES OR FOR MOLDING OR OTHERWISE FORMING INNER TUBES.

847759
MACHINERY FOR MOLDING OR OTHERWISE FORMING RUBBER OR PLASTICS, NESOI.

847790
PARTS OF MACHINERY FOR WORKING RUBBER OR PLASTICS OR PARTS OF MACHINERY USED IN THE MANUFACTURE OF PRODUCTS FROM RUBBER OR PLASTICS MATERIALS, NESOI.

847910
MACHINERY FOR PUBLIC WORKS, BUILDING OR THE LIKE.

847930
PRESSES FOR MANUFACTURING PARTICLE BOARD OR FIBER BUILDING BOARD OF WOOD OR OTHER LIGNEOUS MATERIALS AND OTHER MACHINERY FOR TREATING WOOD OR CORK.

847950
INDUSTRIAL ROBOTS FOR MULTIPLE USES.

847981
MACHINES AND MECHANICAL APPLIANCES FOR TREATING METAL, INCLUDING ELECTRIC WIRE COIL-WINDERS.

847982
MACHINES AND MECHANICAL APPLIANCES FOR MIXING, KNEADING, CRUSHING, GRINDING, SCREENING, SIFTING, HOMOGENIZING, EMULSIFYING OR STIRRING, NESOI.

847989
MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NESOI.

847990
PARTS OF MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NESOI.

848020
MOLD BASES.

848030
MOLDING PATTERNS.

848060
MOLDS FOR MINERAL MATERIALS.

848110
PRESSURE-REDUCING VALVES.

848120
VALVES FOR OLEOHYDRAULIC OR PNEUMATIC TRANSMISSIONS.

848130
CHECK VALVES.

848140
SAFETY OR RELIEF VALVES.

848210
BALL BEARINGS.

848220
TAPERED ROLLER BEARINGS, INCLUDING CONE AND TAPERED ROLLER ASSEMBLIES.

848230
SPHERICAL ROLLER BEARINGS.

848240
NEEDLE ROLLER BEARINGS.

848250
CYLINDRICAL ROLLER BEARINGS NESOI.

848280
BALL OR ROLLER BEARINGS NESOI, INCLUDING COMBINED BALL/ROLLER BEARINGS.

848291
BALLS, NEEDLES AND ROLLERS FOR BALL OR ROLLER BEARINGS.

848299
PARTS OF BALL OR ROLLER BEARINGS, NESOI.

848310
TRANSMISSION SHAFTS (INCLUDING CAMSHAFTS AND CRANKSHAFTS) AND CRANKS.

848320
HOUSED BEARINGS, INCORPORATING BALL OR ROLLER BEARINGS.

848330
BEARING HOUSINGS; PLAIN SHAFT BEARINGS.

848340
GEARS AND GEARING (EXCEPT TOOTHED WHEELS, CHAIN SPROCKETS, ETC.); BALL OR ROLLER SCREWS; GEAR BOXES AND OTHER SPEED CHANGERS, INCL TORQUE CONVERTERS.

848350
FLYWHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS.

848360
CLUTCHES AND SHAFT COUPLINGS (INCLUDING UNIVERSAL JOINTS).

848390
TOOTHED WHEELS, CHAIN SPROCKETS AND OTHER TRANSMISSION ELEMENTS PRESENTED SEPARATELY; PARTS.

848410
GASKETS AND SIMILAR JOINTS OF METAL SHEETING COMBINED WITH OTHER MATERIAL OR OF TWO OR MORE LAYERS OF METAL.

848420
MECHANICAL SEALS.

848490
SETS OR ASSORTMENTS OF GASKETS AND SIMILAR JOINTS, DISSIMILAR IN COMPOSITION, PUT UP IN POUCHES, ENVELOPES OR SIMILAR PACKINGS.

848520
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NESOI.

848530
MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NESOI.

848590
MACHINERY PARTS, NOT CONTAINING ELECTRICAL CONNECTORS, INSULATORS, COILS, CONTACTS OR OTHER ELECTRICAL FEATURES, NESOI.

848610
MACHINES AND APPARATUS FOR THE MANUFACTURE OF BOULES OR WAFERS.

848620
MACHINES AND APPARATUS FOR THE MANUFACTURE OF SEMICONDUCTOR DEVICES OR OF ELECTRONIC INTEGRATES CIRCUITS.

848630
MACHINES AND APPARATUS FOR THE MANUFACTURE OF FLAT PANEL DISPLAYS.

848640
MACHINES AND APPARATUS SPECIFIED IN NOTE 9(C) TO CHAPTER 84.

848690
MACHINES AND APPARATUS OF A KIND USED FOR THE MANUFACTURE OF SEMICONDUCTOR BOULES OR WAFERS, ETC, PARTS AND ACCESSORITES.

848710
SHIPS' OR BOATS' PROPELLERS AND BLADES THEREOF.

848790
MACHINERY PARTS, NON ELECTRIC, NESOI.

850120
UNIVERSAL AC/DC MOTORS OF AN OUTPUT EXCEEDING 37.5 W.

850131
DC MOTORS NESOI AND GENERATORS OF AN OUTPUT NOT EXCEEDING 750 W.

850133
DC MOTORS NESOI AND GENERATORS OF AN OUTPUT EXCEEDING 75 KW BUT NOT EXCEEDING 375 KW.

850153
AC MOTORS NESOI, MULTI-PHASE, OF AN OUTPUT EXCEEDING 75 KW.

850161
AC GENERATORS (ALTERNATORS), OF AN OUTPUT NOT EXCEEDING 75 KVA.

850162
AC GENERATORS (ALTERNATORS), OF AN OUTPUT EXCEEDING 75 KVA BUT NOT EXCEEDING 375 KVA.

850163
AC GENERATORS (ALTERNATORS), OF AN OUTPUT EXCEEDING 375 KVA BUT NOT EXCEEDING 750 KVA.

850164
AC GENERATORS (ALTERNATORS), OF AN OUTPUT EXCEEDING 750 KVA.

850211
GENERATING SETS WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON (DIESEL OR SEMI-DIESEL) ENGINES, OF AN OUTPUT NOT EXCEEDING 75 KVA.

850212
GENERATING SETS WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON (DIESEL ETC.) ENGINES, OF AN OUTPUT EXCEEDING 75 KVA NOT EXCEEDING 375 KVA.

850213
GENERATING SETS WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON (DIESEL OR SEMI-DIESEL) ENGINES, OF AN OUTPUT EXCEEDING 375 KVA.

850220
GENERATING SETS WITH SPARK-IGNITION INTERNAL COMBUSTION PISTON ENGINES.

850231
GENERATING SETS, ELECTRIC, WIND-POWERED.

850239
GENERATING SETS, ELECTRIC, NESOI.

850240
ELECTRIC ROTARY CONVERTERS.

850300
PARTS OF ELECTRIC MOTORS, GENERATORS, GENERATING SETS AND ROTARY CONVERTERS.

850432
ELECTRICAL TRANSFORMERS NESOI, HAVING A POWER HANDING CAPACITY EXCEEDING 1 KVA BUT NOT EXCEEDING 16 KVA.

850433
ELECTRICAL TRANSFORMERS NESOI, HAVING A POWER HANDING CAPACITY EXCEEDING 16 KVA BUT NOT EXCEEDING 500 KVA.

850434
ELECTRICAL TRANSFORMERS NESOI, HAVING A POWER HANDLING CAPACITY EXCEEDING 500 KVA.

850511
PERMANENT MAGNETS AND ARTICLES INTENDED TO BECOME PERMANENT MAGNETS AFTER MAGNETIZATION, MADE OF METAL.

850520
ELECTROMAGNETIC COUPLINGS, CLUTCHES AND BRAKES.

850590
ELECTROMAGNETS; ELECTROMAGNETIC OR PERMANENT MAGNET CHUCKS, CLAMPS AND SIMILAR HOLDING DEVICES; AND PARTS OF ELECTROMAGNETIC ARTICLES, NESOI.

850660
PRIMARY CELLS AND PRIMARY BATTERIES, AIR-ZINC.

850690
PARTS OF PRIMARY CELLS AND PRIMARY BATTERIES.

850710
LEAD-ACID STORAGE BATTERIES OF A KIND USED FOR STARTING PISTON ENGINES.

850720
LEAD-ACID STORAGE BATTERIES NESOI.

850730
NICKEL-CADMIUM STORAGE BATTERIES.

851110
INTERNAL COMBUSTION ENGINE SPARK PLUGS.

851120
INTERNAL COMBUSTION ENGINE IGNITION MAGNETOS, MAGNETO-DYNAMOS AND MAGNETIC FLYWHEELS.

851130
INTERNAL COMBUSTION ENGINE DISTRIBUTORS AND IGNITION COILS.

851140
INTERNAL COMBUSTION ENGINE STARTER MOTORS AND DUAL PURPOSE STARTER-GENERATORS.

851150
INTERNAL COMBUSTION ENGINE GENERATORS, NESOI.

851180
ELECTRICAL IGNITION OR STARTING EQUIPMENT USED FOR INTERNAL COMBUSTION ENGINES, NESOI, AND EQUIPMENT USED IN CONJUNCTION WITH SUCH ENGINES, NESOI.

851190
PARTS FOR ELECTRICAL IGNITION OR STARTING EQUIPMENT USED FOR INTERNAL COMBUSTION ENGINES; PARTS FOR GENERATORS AND CUT-OUTS USED WITH SUCH EQUIPMENT.

851220
ELECTRICAL LIGHTING OR VISUAL SIGNALING EQUIPMENT, FOR USE ON CYCLES OR MOTOR VEHICLES, EXCEPT FOR USE ON BICYCLES.

851290
PARTS OF ELECTRICAL LIGHTING OR SIGNALING EQUIPMENT, WINDSHIELD WIPERS, DEFROSTERS AND DEMISTERS, USED FOR CYCLES OR MOTOR VEHICLES.

851411
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, RESISTANCE TYPE.

851419
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, RESISTANCE TYPE.

851420
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, INDUCTION OR DIELECTRIC TYPE.

851431
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, NESOI.

851432
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, NESOI.

851439
INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS, NESOI.

851490
PARTS FOR INDUSTRIAL OR LABORATORY ELECTRIC FURNACES AND OVENS; PARTS FOR INDUSTRIAL OR LABORATORY INDUCTION OR DIELECTRIC HEATING EQUIPMENT, NESOI.

851511
ELECTRIC SOLDERING IRONS AND GUNS.

851519
ELECTRIC BRAZING OR SOLDERING MACHINES OR APPARTAUS, NESOI.

851521
ELECTRIC MACHINES AND APPARATUS FOR RESISTANCE WELDING OF METAL, FULLY OR PARTY AUTOMATIC.

851529
ELECTRIC MACHINES AND APPARATUS FOR RESISTANCE WELDING OF METAL, OTHER THAN FULLY OR PARTLY AUTOMATIC.

851621
ELECTRIC STORAGE HEATING RADIATORS.

851680
ELECTRIC HEATING RESISTORS.

851771
PARTS OF TELEPHONE SETS AND OTHER APPARATUS FOR THE TRANSMISSION OR RECEPTION OF VOICE, IMAGES OR OTHER DATA.

851779
PARTS OF TELEPHONE SETS AND OTHER APPARATUS FOR THE TRANSMISSION OR RECEPTION OF VOICE, IMAGES OR OTHER DATA.

852351
SOLID-STATE NON-VOLATILE SEMICONDUCTOR STORAGE DEVICES.

852550
TRANSMISSION APPARATUS FOR RADIO-BROADCASTING OR TELEVISION.

852581
TELEVISION CAMERAS, DIGITAL CAMERAS AND VIDEO CAMERA RECORDERS.

852582
TELEVISION CAMERAS, DIGITAL CAMERAS AND VIDEO CAMERA RECORDERS.

852583
TELEVISION CAMERAS, DIGITAL CAMERAS AND VIDEO CAMERA RECORDERS.

852589
TELEVISION CAMERAS, DIGITAL CAMERAS AND VIDEO CAMERA RECORDERS.

852610
RADAR APPARATUS.

852692
RADIO REMOTE CONTROL APPARATUS.

852721
RADIOBROADCAST RECEIVERS FOR MOTOR VEHICLES, COMBINED WITH SOUND RECORDING OR REPRODUCING APPARATUS, NOT CAPABLE OF OPERATING WITHOUT OUTSIDE POWER.

852849
CATHODE-RAY TUBE MONITORS, NOT INCORPORATING TELEVISION RECEPTION APPARATUS, NESOI.

852910
ANTENNAS AND ANTENNA REFLECTORS AND PARTS THEREOF.

853010
ELECTRICAL SIGNALING, SAFETY OR TRAFFIC CONTROL EQUIPMENT FOR RAILWAYS, STREETCAR LINES OR SUBWAYS.

853080
ELECTRICAL SIGNALING, SAFETY OR TRAFFIC CONTROL EQUIPMENT FOR ROADS, INLAND WATERWAYS, PARKING FACILITIES, PORT INSTALLATIONS OR AIRFIELDS.

853090
PARTS FOR ELECTRICAL SIGNALING, SAFETY OR TRAFFIC CONTROL EQUIPMENT FOR RAIL LINES, ROADS, WATERWAYS, PARKING AREAS, PORT INSTALLATIONS OR AIRFIELDS.

853210
FIXED CAPACITORS, DESIGNED FOR USE IN 50/60 HZ CIRCUITS, WITH REACTIVE POWER CAPACITY NOT LESS THAN 0.5 KVAR (POWER CAPACITORS).

853221
TANTALUM CAPACITORS.

853224
FIXED CAPACITORS NESOI, MULTILAYER CERAMIC DIELECTRIC.

853229
FIXED CAPACITORS, NESOI.

853230
VARIABLE OR ADJUSTABLE (PRE-SET) CAPACITORS.

853290
PARTS FOR ELECTRICAL CAPACITORS.

853329
FIXED RESISTORS, NESOI, FOR A POWER HANDLING CAPACITY EXCEEDING 20 W.

853390
PARTS FOR ELECTRICAL RESISTORS, INCLUDING PARTS FOR RHEOSTATS AND POTENTIOMETERS.

853400
PRINTED CIRCUITS.

853510
FUSES FOR ELECTRICAL APPARATUS FOR A VOLTAGE EXCEEDING 1,000 V.

853521
AUTOMATIC CIRCUIT BREAKERS FOR A VOLTAGE EXCEEDING 1,000 V BUT LESS THAN 72.5 KV.

853529
AUTOMATIC CIRCUIT BREAKERS FOR A VOLTAGE OF 72.5 KV OR MORE.

853530
ISOLATING SWITCHES AND MAKE-AND-BREAK SWITCHES FOR A VOLTAGE EXCEEDING 1,000 V.

853540
LIGHTNING ARRESTERS, VOLTAGE LIMITERS, AND SURGE SUPPRESSORS FOR A VOLTAGE EXCEEDING 1,000 V.

853590
ELECTRICAL APPARATUS FOR SWITCHING, PROTECTING OR MAKING CONNECTIONS TO OR IN ELECTRICAL CIRCUITS, FOR A VOLTAGE EXCEEDING 1,000 V, NESOI.

853650
ELECTRICAL SWITCHES FOR A VOLTAGE NOT EXCEEDING 1,000 V, NESOI.

853669
ELECTRICAL PLUGS AND SOCKETS FOR A VOLTAGE NOT EXCEEDING 1,000 V.

853690
ELECTRICAL APPARATUS FOR SWITCHING, PROTECTING OR MAKING CONNECTIONS TO OR IN ELECTRICAL CIRCUITS, FOR A VOLTAGE NOT EXCEEDING 1,000 V, NESOI.

853710
BOARDS, PANELS, CONSOLES, ETC. WITH ELECTRICAL APPARATUS, FOR ELECTRIC CONTROL OR DISTRIBUTION OF ELECTRICITY, FOR A VOLTAGE NOT EXCEEDING 1,000 V.

853810
BOARDS, PANELS, CONSOLES, DESKS, CABINETS, AND OTHER BASES FOR ELECTRIC CONTROL ETC. EQUIPMENT, NOT EQUIPPED WITH ELECTRICAL APPARATUS.

853890
PARTS FOR ELECTRICAL APPARATUS FOR ELECTRICAL CIRCUITS, BOARDS, PANELS ETC. FOR ELECTRIC CONTROL OR DISTRIBUTION OF ELECTRICITY, NESOI.

853929
ELECTRIC FILAMENT LAMPS, NESOI.

853939
ELECTRIC DISCHARGE LAMPS (OTHER THAN ULTRAVIOLET OR FLUORESCENT, HOT CATHODE LAMPS), NESOI.

853941
ARC LAMPS.

853951
ELECTRIC LAMPS AND LIGHTING FITTINGS, NESOI.

853952
LIGHT-EMITTING DIODE (LED) LAMPS.

854020
TELEVISION CAMERA TUBES; IMAGE CONVERTERS AND INTENSIFIERS; OTHER PHOTOCATHODE TUBES.

854060
CATHODE-RAY TUBES, N.E.S.O.I.

854071
MAGNETRON MICROWAVE TUBES.

854079
MICROWAVE TUBES, NESOI.

854081
RECEIVER OR AMPLIFIER TUBES.

854089
THERMIONIC AND OTHER CATHODE TUBES, NESOI.

854091
PARTS OF CATHODE-RAY TUBES.

854099
PARTS OF CATHODE TUBES, NESOI.

854110
DIODES, OTHER THAN PHOTOSENSITIVE OR LIGHT-EMITTING DIODES.

854121
TRANSISTORS, OTHER THAN PHOTOSENSITIVE, WITH A DISSIPATION RATE OF LESS THAN 1 W.

854129
TRANSISTORS, OTHER THAN PHOTOSENSITIVE, NESOI.

854130
THYRISTORS, DIACS AND TRIACS, OTHER THAN PHOTOSENSITIVE DEVICES.

854141
PHOTOSENSITIVE SEMICONDUCTOR DEVICES, INCLUDING PHOTOVOLTAIC CELLS; LIGHT-EMITTING DIODES.

854142
PHOTOSENSITIVE SEMICONDUCTOR DEVICES, INCLUDING PHOTOVOLTAIC CELLS; LIGHT-EMITTING DIODES.

854143
PHOTOSENSITIVE SEMICONDUCTOR DEVICES, INCLUDING PHOTOVOLTAIC CELLS; LIGHT-EMITTING DIODES.

854149
PHOTOSENSITIVE SEMICONDUCTOR DEVICES, INCLUDING PHOTOVOLTAIC CELLS; LIGHT-EMITTING DIODES.

854151
SEMICONDUCTOR DEVICES, EXCEPT PHOTOSENSITIVE AND PHOTOVOLTAIC CELLS, NESOI.

854159
SEMICONDUCTOR DEVICES, EXCEPT PHOTOSENSITIVE AND PHOTOVOLTAIC CELLS, NESOI.

854160
MOUNTED PIEZOELECTRIC CRYSTALS.

854190
PARTS FOR DIODES, TRANSISTORS AND SIMILAR SEMICONDUCTOR DEVICES; PARTS FOR PHOTOSENSITIVE SEMICONDUCTOR DEVICES AND MOUNTED PIEZOELECTRIC CRYSTALS.

854231
PROCESSORS AND CONTROLLERS, ELECTRONIC INTEGRATED CIRCUITS.

854232
MEMORIES, ELECTRONIC INTEGRATED CIRCUITS.

854233
AMPLIFIERS, ELECTRONIC INTEGRATED CIRCUITS.

854239
ELECTRONIC INTEGRATED CIRCUITS, NESOI.

854290
PARTS FOR ELECTRONIC INTEGRATED CIRCUITS AND MICROASSEMBLIES.

854310
PARTICLE ACCELERATORS.

854320
ELECTRICAL SIGNAL GENERATORS.

854330
ELECTRICAL MACHINES AND APPARATUS FOR ELECTROPLATING, ELECTROLYSIS OR ELECTROPHORESIS.

854370
ELECTRICAL MACHINES AND APPARATUS, HAVING INDIVIDUAL FUNCTIONS, NESOI.

854411
INSULATED WINDING WIRE OF COPPER.

854430
INSULATED IGNITION WIRING SETS AND OTHER WIRING SETS FOR VEHICLES, AIRCRAFT AND SHIPS.

854449
INSULATED ELECTRIC CONDUCTORS, FOR A VOLTAGE NOT EXCEEDING 80 V, NOT FITTED WITH CONNECTORS.

854460
INSULATED ELECTRIC CONDUCTORS, FOR A VOLTAGE EXCEEDING 1,000 V.

854470
INSULATED OPTICAL FIBER CABLES, MADE UP OF INDIVIDUALLY SHEATHED FIBERS.

854520
ELECTRICAL CARBON OR GRAPHITE BRUSHES.

854710
INSULATING FITTINGS OF CERAMICS, FOR ELECTRICAL MACHINES OR APPLIANCES.

854720
INSULATING FITTINGS OF PLASTICS, FOR ELECTRICAL MACHINES OR APPLIANCES.

854790
INSULATING FITTINGS NESOI, FOR ELECTRICAL MACHINES OR APPLIANCES; ELECTRICAL CONDUIT TUBING AND JOINTS, OF BASE METAL LINED WITH INSULATING MATERIAL.

854800
ELECTRICAL PARTS OF MACHINERY OR APPARATUS, NESOI.

854911
WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC STORAGE BATTERIES; SPENT PRIMARY CELLS, SPENT PRIMARY AND ELECTRIC STORAGE BATTERIES.

854912
WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC STORAGE BATTERIES; SPENT PRIMARY CELLS, SPENT PRIMARY AND ELECTRIC STORAGE BATTERIES.

854913
WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC STORAGE BATTERIES; SPENT PRIMARY CELLS, SPENT PRIMARY AND ELECTRIC STORAGE BATTERIES.

854914
WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC STORAGE BATTERIES; SPENT PRIMARY CELLS, SPENT PRIMARY AND ELECTRIC STORAGE BATTERIES.

854919
WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC STORAGE BATTERIES; SPENT PRIMARY CELLS, SPENT PRIMARY AND ELECTRIC STORAGE BATTERIES.

854921
MUNICIPAL WASTE.

854929
WASTE AS SPECIFIED IN CHAPTER 38 NOTES, NESOI.

854931
CULLET AND OTHER WASTE AND SCRAP OF GLASS; GLASS IN THE MASS.

854939
WASTE AND SCRAP OF PRECIOUS METAL, NESOI.

854991
CULLET AND OTHER WASTE AND SCRAP OF GLASS; GLASS IN THE MASS.

854999
WASTE AND SCRAP OF PRECIOUS METAL, NESOI.

860110
RAIL LOCOMOTIVES POWERED FROM AN EXTERNAL SOURCE OF ELECTRICITY.

860290
RAIL LOCOMOTIVES, NESOI; LOCOMOTIVE TENDERS.

860400
RAILWAY OR TRAMWAY MAINTENANCE OR SERVICE VEHICLES, WHETHER OR NOT SELF-PROPELLED (FOR EXAMPLE, WORKSHOPS, CRANES, BALLAST TAMPERS, TRACKLINERS, ETC.).

860692
RAILWAY OR TRAMWAY FREIGHT CARS, OPEN, WITH NON-REMOVABLE SIDES OF A HEIGHT EXCEEDING 60 CM, NOT SELF-PROPELLED, NESOI.

870310
PASSENGER MOTOR VEHICLES SPECIALLY DESIGNEED FOR TRAVELING ON SNOW; GOLF CARTS AND SIMILAR VEHICLES.

870410
DUMPERS (DUMP TRUCKS) DESIGNED FOR OFF-HIGHWAY USE.

870421
MOTOR VEHICLES FOR GOODS TRANSPORT NESOI, WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINE (DIESEL), GVW NOT OVER 5 METRIC TONS.

870422
MOTOR VEHICLES FOR GOODS TRANSPORT NESOI, WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINE (DIESEL), GVW OVER 5 BUT NOT OVER 20 METRIC TONS.

870423
MOTOR VEHICLES FOR GOODS TRANSPORT NESOI, WITH COMPRESSION-IGNITION INTERNAL COMBUSTION PISTON ENGINE (DIESEL), GVW OVER 20 METRIC TONS.

870432
MOTOR VEHICLES FOR GOODS TRANSPORT NESOI, WITH SPARK-IGNITION INTERNAL COMBUSTION PISTON ENGINE, GVW OVER 5 METRIC TONS.

870510
MOBILE CRANES.

870540
CONCRETE MIXERS, SPECIAL PURPOSE VEHICLES.

870590
SPECIAL PURPOSE VEHICLES, OTHER THAN THOSE PRINCIPALLY DESIGNED FOR THE TRANSPORT OF PERSONS OR GOODS, NESOI.

870911
WORKS TRUCKS (NOT LIFTING OR HANDLING) USED IN FACTORIES ETC. AND TRACTORS USED ON RAILWAY STATION PLATFORMS, ELECTRICAL.

870990
PARTS FOR WORKS TRUCKS (NOT LIFTING OR HANDLING) USED IN FACTORIES ETC. AND PARTS OF TRACTORS OF THE TYPE USED ON RAILWAY STATION PLATFORMS.

871620
SELF-LOADING OR SELF-UNLOADING TRAILERS AND SEMI-TRAILERS FOR AGRICULTURAL PURPOSES.

871639
TRAILERS AND SEMI-TRAILERS FOR THE TRANSPORT OF GOODS, NESOI.

871690
PARTS OF TRAILERS, SEMI-TRAILERS AND OTHER VEHICLES, NOT MECHANICALLY PROPELLED.

900110
OPTICAL FIBERS, OPTICAL FIBER BUNDLES AND CABLES, OTHER THAN OPTICAL FIBER CABLES MADE UP OF INDIVIDUALLY SHEATHED FIBERS.

900510
BINOCULARS.

900580
MONOCULARS, OTHER OPTICAL TELESCOPES AND MOUNTINGS; OTHER ASTRONOMICAL INSTRUMENTS AND MOUNTINGS, EXCLUDING INSTRUMENTS FOR RADIO-ASTRONOMY.

900590
PARTS AND ACCESSORIES (INCLUDING MOUNTINGS) OF BINOCULARS, MONOCULARS, OTHEROTHER OPTICAL TELECOPES AND ASTRONOMICAL INSTRUMENTS NESOI.

900630
CAMERAS DESIGNED FOR UNDERWATER USE, FOR AERIAL SURVEY, OR MEDICAL/SURGICAL EXAMINATION OF INTERNAL ORGANS; CAMERAS FOR FORENSIC OR CRIMINOLOGICAL USE.

900640
INSTANT PRINT CAMERAS.

900653
CAMERAS (STILL) NESOI, FOR ROLL FILM OF A WIDTH OF 35 MM (1.4 INCH).

900659
PHOTOGRAPHIC CAMERAS (OTHER THAN CINEMATOGRAPHIC), NESOI.

900661
PHOTOGRAPHIC DISCHARGE LAMP (ELECTRONIC) FLASHLIGHT APPARATUS.

900669
PHOTOGRAPHIC FLASHLIGHT APPARATUS, NESOI.

900691
PARTS AND ACCESSORIES FOR PHOTOGRAPHIC (OTHER THAN CINEMATOGRAPHIC) CAMERAS.

900699
PARTS AND ACCESSORIES FOR PHOTOGRAPHIC FLASHLIGHT APPARATUS AND FLASHBULBS, NESOI.

901010
PHOTOGRAPHIC EQUIPMENT FOR THE AUTOMATIC DEVELOPMENT OF FILM OR PAPER IN ROLLS OR AUTOMATICALLY EXPOSING DEVELOPED FILM TO ROLLS OF PHOTOGRAPHIC PAPER.

901380
OPTICAL DEVICES, APPLIANCES AND INSTRUMENTS, NESOI.

901410
DIRECTION FINDING COMPASSES.

901420
INSTRUMENTS AND APPLIANCES FOR AERONAUTICAL OR SPACE NAVIGATION (OTHER THAN COMPASSES).

901480
NAVIGATIONAL INSTRUMENTS AND APPLIANCES, NESOI.

901490
PARTS AND ACCESSORIES FOR DIRECTION FINDING COMPASSES AND OTHER NAVIGATIONAL INSTRUMENTS AND APPLIANCES.

901510
RANGEFINDERS.

901520
THEODOLITES AND TACHYOMETERS.

901540
PHOTOGRAMMETRICAL SURVEYING INSTRUMENTS AND APPLIANCES.

901580
SURVEYING INSTRUMENTS AND APPLIANCES, NESOI, HYDROGRAPHIC, OCEANOGRAPHIC, HYDROLOGICAL, METEOROLOGICAL OR GEOPHYSICAL INSTRUMENTS AND APPLIANCES NESOI.

901590
PARTS ETC. FOR RANGEFINDERS AND SURVEYING, HYDROGRAPHIC, OCEAN OGRAPHIC, HYDROLOGICAL, METEOROLOGICAL OR GEOPHYSICAL INSTRUMENTS AND APPLIANCES NESOI.

902480
MACHINES AND APPLIANCES NESOI FOR TESTING THE HARDNESS, STRENGTH, COMPRESSIBILITY, ELASTICITY OR OTHER SPECIFIC PROPERTIES OF MATERIALS.

902519
THERMOMETERS AND PYROMETERS, NOT COMBINED WITH OTHER INSTRUMENTS, NESOI.

902590
PARTS AND ACCESSORIES FOR HYDROMETERS AND SIMILAR FLOATING INSTRUMENTS, THERMOMETERS, PYROMETERS, BAROMETERS, HYGROMETERS AND PSYCHROMETERS.

902610
INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING THE FLOW OR LEVEL OF LIQUIDS, NESOI.

902620
INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING PRESSURE OF LIQUIDS OR GASES, NESOI.

902680
INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING OTHER VARIABLES OF LIQUIDS OR GASES, NESOI.

902690
PARTS AND ACCESSORIES FOR INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING THE FLOW, LEVEL, PRESSURE OR OTHER VARIABLES OF LIQUIDS OR GASES, NESOI.

902710
GAS OR SMOKE ANALYSIS APPARATUS.

902781
INSTRUMENTS AND APPARATUS FOR PHYSICAL OR CHEMICAL ANALYSIS, NESOI.

902789
INSTRUMENTS AND APPARATUS FOR PHYSICAL OR CHEMICAL ANALYSIS, NESOI.

902910
REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, ODOMETERS, PEDOMETERS AND THE LIKE.

902920
SPEEDOMETERS AND TACHOMETERS; STROBOSCOPES.

902990
PARTS AND ACCESSORIES FOR REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, ODOMETERS, PEDOMETERS ETC., SPEEDOMETERS, TACHOMETERS AND STROBOSOPES.

903032
MULTIMETERS WITH A RECORDING DEVICE.

903039
INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING VOLTAGE, CURRENT, RESISTANCE OR POWER, WITHOUT A RECORDING DEVICE (EXCLUDING MULTIMETERS), NESOI.

903040
INSTRUMENTS AND APPARATUS NESOI, SPECIALLY DESIGNED FOR TELECOMMUNICATIONS (FOR EXAMPLE, CROSS-TALK METERS, GAIN MEASURING INSTRUMENTS ETC.).

903082
INST & APP W/A RECORDING DEVICE DESIGNED TO CHECK OR MEASURE SEMICONDUCTOR WAFERS & DEVICES (SUCH AS PROBE TESTERS, RESISTIVITY CHECKERS, LOGIC ANALYZERS.

903089
INSTRUMENTS AND APPARATUS NESOI, WITHOUT A RECORDING DEVICE FOR MEASURING OR CHECKING ELECTRICAL QUANTITIES.

903120
TEST BENCHES.

903149
MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, N.E.S.O.I.

903180
MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NESOI.

903281
HYDRAULIC OR PNEUMATIC AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

903289
AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS (EXCLUDING THERMOSTATS, MANOSTATS AND HYDRAULIC TYPES), NESOI.

10. Supplement No. 5 to part 746 is amended by:
a. Revising the heading of the supplement; and

b. Adding in numerical order the following entries to the table: “8407100020,” “8407100040,” “8407100060,” “8407100090,” “8407310000,” “8407322000,” “8407325000,” “8407332000,” “8407335000,” “8407342030,” “8407342090,” “8407345000,” “8407901010,” “8407901050,” “8407909010,” “8407909030,” “8407909050,” “8408100030,” “8408100040,” “8408100050,” “8408202000,” “8408205000,” “8408901000,” “8408909010,” “8408909020,” “8408909030,” “8408909040,” “8408909050,” “8409100040,” “8409100080,” “8409914000,” “8409918000,” “8409994000,” “8409996000,” “8409998000,” “8411114010,” “8411114050,” “8411118000,” “8411124010,” “8411124050,” “8411128000,” “8411214010,” “8411214050,” “8411218000,” “8411224010,” “8411224050,” “8411228000,” “8411814010,” “8411814050,” “8411818000,” “8411824010,” “8411824050,” “8411828000,” “8411914000,” “8411917010,” “8411917050,” “8411994000,” “8411997010,” “8411997050,” “8414510010,” “8414510090,” “8414593000,” “8414596040,” “8414599080,” “8414600000,” “8415103040,” “8415103060,” “8415103080,” “8415106000,” “8415109000,” “8418100010,” “8418100020,” “8418100030,” “8418100040,” “8418100090,” “8418210010,” “8418210020,” “8418210030,” “8418210090,” “8418291000,” “8418292000,” “8418300000,” “8418400000,” “8419815000,” “8419819040,” “8419819080,” “8422110000,” “8423100010,” “8423100050,” “8428600000,” “8431390010,” “8431390090,” “8443120000,” “8443310000,” “8443321010,” “8443321020,” “8443321030,” “8443321040,” “8443321050,” “8443321060,” “8443321070,” “8443321080,” “8443321090,” “8443325000,” “8443391000,” “8443392000,” “8443393000,” “8443394000,” “8443395000,” “8443396000,” “8443399000,” “8450110010,” “8450110090,” “8450120000,” “8450190000,” “8451210010,”

“8451210090,” “8452100000,” “8470100000,” “8470210000,” “8470290000,” “8470300000,” “8471410110,” “8471410150,” “8471490000,” “8471500110,” “8471500150,” “8471601010,” “8471601050,” “8471602000,” “8471607000,” “8471608000,” “8471609030,” “8471609050,” “8471701000,” “8471702000,” “8471703000,” “8471704035,” “8471704065,” “8471704095,” “8471705035,” “8471705065,” “8471705095,” “8471706000,” “8471709000,” “8471801000,” “8471804000,” “8471809000,” “8471900000,” “8472900500,” “8472901000,” “8472905000,” “8472909002,” “8479600000,” “8483101020,” “8483101050,” “8483103010,” “8483103050,” “8483105000,” “8483200010,” “8483200050,” “8483305020,” “8483305040,” “8483308055,” “8483308065,” “8483308070,” “8483308090,” “8483401000,” “8483404010,” “8483404050,” “8483407000,” “8483408000,” “8483409000,” “8483508030,” “8483508080,” “8483604000,” “8483608000,” “8483901000,” “8483905000,” “8483908010,” “8483909500,” “8508110000,” “8508190000,” “8508600000,” “8509801000,” “8509802000,” “8509805040,” “8509805060,” “8509805091,” “8511100000,” “8511200000,” “8511300040,” “8511300080,” “8511400000,” “8511500000,” “8511802000,” “8511804000,” “8511806000,” “8511906020,” “8511908000,” “8512202000,” “8512204000,” “8512300030,” “8512300050,” “8512402000,” “8512404000,” “8516310000,” “8516500000,” “8516604000,” “8516606000,” “8516710000,” “8516720000,” “8516790000,” “8517110000,” “8517130000,” “8517180000,” “8517610000,” “8517620010,” “8517620050,” “8517690000,” “8519200000,” “8519301000,” “8519302000,” “8519811000,” “8519812000,” “8519812500,” “8519813000,” “8519814105,” “8519814110,” “8519814120,” “8519814150,” “8519891000,” “8519892000,” “8519893000,” “8521100000,” “8521900000,” “8526910010,” “8526910030,” “8526910070,” “8527120000,” “8527131100,” “8527132000,” “8527134000,” “8527136000,” “8527190000,” “8527210000,” “8527290000,” “8527910000,” “8527920000,” “8527993005,” “8527993060,” “8527995030,” “8528710000,” “8528723000,” “8528726005,” “8528726010,” “8528726040,” “8528726057,” “8529102020,” “8529102050,” “8529102090,” “8529104000,” “8529109000,” “8531100015,” “8531100025,” “8531100035,” “8531100045,” “8543702000,” “8543704000,” “8543706000,” “8543707100,” “8543708000,” “8543708500,” “8543709610,” “8543709620,” and “8544300000.”

The additions read as follows:

Supplement No. 5 to Part 746—`Luxury Goods' Sanctions for Russia and Belarus Pursuant to § 746.10(a)(1) and (2)

Schedule B
2-Digit chapter heading
10-Digit commodity description and per unit wholesale price in the U.S. if applicable

*         *         *         *         *         *         *

8407100020
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING OR ROTARY INTERNAL COMBUSTION PISTON ENGINES FOR CIVIL AIRCRAFT, NEW, LESS THAN 373 KW, VALUED AT $750 PER UNIT WHOLESALE PRICE IN THE US.
1

8407100040
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING OR ROTARY INTERNAL COMBUSTION PISTON ENGINES FOR CIVIL AIRCRAFT, NEW, 373 KW OR OVER, VALUED AT $500 PER UNIT WHOLESALE PRICE IN THE US.
1

8407100060
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING OR ROTARY INTERNAL COMBUSTION PISTON ENGINES FOR CIVIL AIRCRAFT, USED OR REBUILT, VALUED AT $300 PER UNIT WHOLESALE PRICE IN THE US.
1

8407100090
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING OR ROTARY INTERNAL COMBUSTION PISTON TYPE AIRCRAFT ENGINES, EXCEPT CIVIL AIRCRAFT USE, VALUED AT $300 PER UNIT WHOLESALE PRICE IN THE US.
1

*         *         *         *         *         *         *

8407310000
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING PISTON ENGINES OF A KIND USED FOR THE PROPULSION OF VEHICLES OF CHAPTER 87, NOT EXCEEDING 50 CC CYLINDER CAPACITY, VALUED AT $500 PER UNIT WHOLESALE PRICE IN THE US.
1

8407322000
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION PISTON ENGINES EXCEEDING 50 CC BUT NOT EXCEEDING 250 CC, TO BE INSTALLED IN ROAD TRACTORS, MOTOR BUSES, AUTOMOBILES OR TRUCKS, NEW OR USED, VALUED AT $1,000 PER UNIT WHOLESALE PRICE IN THE US.
1

8407325000
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING PISTON ENGINES EXCEEDING 50 CC BUT NOT EXCEEDING 250 CC, FOR VEHICLES OF CHAPTER 87, NESOI, VALUED AT $750 PER UNIT WHOLESALE PRICE IN THE US.
1

8407332000
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION PISTON ENGINES EXCEEDING 250 CC BUT NOT EXCEEDING 1000 CC, TO BE INSTALLED IN ROAD TRACTORS, MOTOR BUSES, AUTOMOBILES OR TRUCKS, NEW/USED, VALUED AT $1,000 PER UNIT WHOLESALE PRICE IN THE US.
1

8407335000
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION RECIPROCATING PISTON ENGINES EXCEEDING 250 CC BUT NOT EXCEEDING 1000 CC, NESOI, VALUED AT $500 PER UNIT WHOLESALE PRICE IN THE US.
1

8407342030
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

SPARK-IGNITION PISTON ENGINES EXCEEDING 1000CC AND NOT

[Text truncated at 120,000 characters. The full text is on the page linked above.]

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3A2023-03927. Public record. Not legal advice.