# Small Business Size Standards: Manufacturing and Industries With Employee-Based Size Standards in Other Sectors Except Wholesale Trade and Retail Trade

> Briefs, arguments, decisions, and more.

URL: https://www.frixlaw.com/law-library/documents/fr%3A2023-02780

## Record

- **Collection:** Federal Register
- **Document type:** Rule
- **Published:** February 15, 2023
- **Citation:** 88 FR 9970

## Text

SMALL BUSINESS ADMINISTRATION
13 CFR Part 121
RIN 3245-AH09
Small Business Size Standards: Manufacturing and Industries With Employee-Based Size Standards in Other Sectors Except Wholesale Trade and Retail Trade

AGENCY:

U.S. Small Business Administration.

ACTION:

Final rule.

SUMMARY:

The U.S. Small Business Administration (SBA or the Agency) is increasing its employee-based small business size definitions (commonly referred to as “size standards”) for North American Industry Classification System (NAICS) sectors related to Mining, Quarrying, and Oil and Gas Extraction (Sector 21); Utilities (Sector 22); Manufacturing (Sector 31-33); Transportation and Warehousing (Sector 48-49); Information (Section 51); Finance and Insurance (Sector 52); Professional, Scientific and Technical Services (Sector 54); and Administrative and Support, Waste Management and Remediation Services (Sector 56). Specifically, in terms of industries defined under the NAICS 2022 revision, SBA is increasing 144 and retaining 268 employee-based size standards in those sectors. SBA is also retaining the current 500-employee size standard for Federal procurement of supplies under the nonmanufacturer rule.

DATES:

This rule is effective March 17, 2023.

FOR FURTHER INFORMATION CONTACT:

Samuel Castilla, Economist, Office of Size Standards, (202) 205-6618 or
sizestandards@sba.gov.

SUPPLEMENTARY INFORMATION:

Discussion of Size Standards

To determine eligibility for Federal small business assistance, SBA establishes small business size definitions (usually referred to as “size standards”) for private sector industries in the United States. SBA uses two primary measures of business size for size standards purposes: average annual receipts and average number of employees. SBA uses financial assets for certain financial industries and refining capacity, in addition to employees, for the petroleum refining industry to measure business size. In addition, SBA's Small Business Investment Company (SBIC), Certified Development Company (CDC/504), and 7(a) Loan Programs use either the industry-based size standards or tangible net worth and net income-based alternative size standards to determine eligibility for those programs.

In September 2010, Congress passed the Small Business Jobs Act of 2010 (Pub. L. 111-240, 124 Stat. 2504, September 27, 2010) (“Jobs Act”), requiring SBA to review all size standards every five years and make necessary adjustments to reflect current industry and market conditions. In accordance with the Jobs Act, in early 2016, SBA completed the first five-year review of all size standards—except those for agricultural enterprises for which size standards were previously set by Congress—and made appropriate adjustments to size standards for a number of industries to reflect current industry and Federal market conditions. SBA also adjusts its monetary-based size standards for inflation at least once every five years. An interim final rule on SBA's latest inflation adjustment to size standards, effective December 19, 2022, was published in the
Federal Register
on November 17, 2022 (87 FR 69118). SBA also updates its size standards every five years to adopt the Office of Management and Budget's (OMB) quinquennial North American Industry Classification (NAICS) revisions to its table of small business size standards. On December 21, 2021, OMB published its “Notice of NAICS 2022 Final Decisions . . .” (86 FR 72277), accepting the Economic Classification Policy Committee (ECPC) recommendations, as outlined in the July 2, 2021,
Federal Register
notice (86 FR 35350), for “the 2022 Revision to the North American Industry Classification System (NAICS), . . . .” On July 5, 2022, SBA issued a proposed rule to adopt the OMB's NAICS 2022 revisions for its table of size standards (87 FR 40034), which SBA finalized in September 2022 with an effective date of October 1, 2022 (87 FR 59240; September 29, 2022).

This final rule is part of a series of final rules that revised size standards of industries grouped by various NAICS sectors. Rather than revise all size standards at one time, SBA is revising size standards by grouping industries within various NAICS sectors that use the same size measure (
i.e.,
employees or receipts). In the prior review, SBA revised size standards mostly on a sector-by-sector basis. As part of the second five-year review of size standards under the Jobs Act, SBA has already issued five final rules reviewing all monetary-based size standards and all employee-based size standards that are part of the Wholesale Trade and Retail Trade sectors.
1

1
See Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting; Mining, Quarrying, and Oil and Gas Extraction; Utilities; Construction (87 FR 18607; March 31, 2022), Small Business Size Standards: Transportation and Warehousing; Information; Finance and Insurance; Real Estate and Rental and Leasing (87 FR 18627; March 31, 2022), Small Business Size Standards: Professional, Scientific and Technical Services; Management of Companies and Enterprises; Administrative and Support and Waste Management and Remediation Services (87 FR 18665; March 31, 2022), Small Business Size Standards: Education Services; Health Care and Social Assistance; Arts, Entertainment and Recreation; Accommodation and Food Services; Other Services (87 FR 18646; March 31, 2022), and Small Business Size Standards: Wholesale Trade and Retail Trade (87 FR 35869; June 14, 2022).

To complete its second five-year review of size standards, SBA reviewed size standards under Sector 31-33 and other sectors with employee-based size standards not part of Wholesale and Retail Trade sectors to determine whether the existing size standards should be retained or revised based on the current industry and Federal market data. After its review, SBA published in the April 26, 2022, issue of the
Federal Register
(87 FR 24752) a proposed rule (“April 2022 proposed rule”) to increase the employee-based size standards for 150 industries or subindustries (or “exceptions”) under NAICS 2017, including 10 industries in NAICS Sector 21 (Mining, Quarrying, and Oil and Gas Extraction), 10 industries in NAICS Sector 22 (Utilities), 120 industries in NAICS sector 31-33 (Manufacturing), five industries in Sector 48-49 (Transportation and Warehousing), three industries in Sector 51 (Information), one subindustry (“exception”) in Sector 54 (Professional, Scientific and Technical Services), and one subindustry (“exception”) in Sector 56 (Administrative and Support, Waste Management and Remediation Services). SBA also proposed to retain the 500-employee size standard under its nonmanufacturer rule.

In this final rule, SBA is adopting the proposed size standards from the April 2022 proposed rule without change and applying the adopted changes to the recently adopted NAICS 2022 structure following the methodology outlined in the NAICS 2022 adoption final rule.

In conjunction with the current, second five-year comprehensive size standards review, SBA developed a revised “Size Standards Methodology” (Methodology) for developing, reviewing, and modifying size standards, when necessary. SBA's revised Methodology provides a detailed description of its analyses of various industry and program factors

and data sources, and how the agency uses the results to establish and revise size standards. In the proposed rule itself, SBA detailed how it applied its revised Methodology to review and modify, where necessary, the existing size standards for industries covered in this final rule. Prior to finalizing the revised Methodology, SBA issued a notification in the April 27, 2018, edition of the
Federal Register
(83 FR 18468) to solicit comments from the public and notify stakeholders of the proposed changes to the Methodology. SBA considered all public comments in finalizing the revised Methodology. For a summary of comments and SBA's responses, refer to the SBA's April 11, 2019,
Federal Register
notification (84 FR 14587) of the issuance of the final revised Methodology. SBA's Size Standard Methodology is available on its website at
www.sba.gov/size.

In evaluating an industry's size standard, as described in its Size Standards Methodology as well as in the April 2022 proposed rule, SBA examines its characteristics (such as average firm size, startup costs and entry barriers, industry competition and distribution of firms by size) and the small business level and share of Federal contract dollars in that industry. SBA also examines the potential impact a size standard revision might have on its financial assistance programs, and whether a business concern under a revised size standard would be dominant in its industry. SBA analyzed the characteristics of each employee-based industry in NAICS Sector 31-33 and other sectors with employee-based size standards, mostly using a special tabulation obtained from the U.S. Bureau of the Census from its 2012 Economic Census (the latest available when the proposed rule was developed). The 2012 Economic Census special tabulation contains information for different levels of NAICS categories on average and median firm size in terms of both receipts and employment, total receipts generated by the four and eight largest firms, the Herfindahl-Hirschman Index (HHI), the Gini coefficient, and size distributions of firms by various receipts and employment size groupings. To evaluate average asset size, SBA combines the sales to total assets ratios by industry, obtained from the Risk Management Association's (RMA) Annual eStatement Studies (
http://www.rmahq.org/estatement-studies/
) with the simple average receipts size by industry from the 2012 Economic Census tabulation to estimate the average assets size for each industry. SBA also evaluated the small business level and share of Federal contracts in each of the industries using data from the Federal Procurement Data System—Next Generation (FPDS-NG) for fiscal years 2016-2018. Table 4 of the April 2022 proposed rule, Size Standards Supported by Each Factor for Each Industry (Employees), shows the results of analyses of industry and Federal contracting factors for each industry and subindustry (“exception”) covered by the proposed rule. Of the 427 industries and 5 subindustries (
i.e.,
“exceptions”) reviewed in the proposed rule, the results from analyses of the latest available data on the five primary factors discussed above supported increasing employee-based size standards for 157 industries and 2 subindustries (“exceptions”), decreasing size standards for 216 industries, and maintaining size standards for 54 industries and 3 subindustries (“exceptions”). Table 1, Summary of Calculated Size Standards (NAICS 2017), below, summarizes the analytical results from the April 2022 proposed rule by NAICS sector.

Table 1—Summary of Calculated Size Standards
[NAICS 2017]

NAICS
sector

NAICS sector title
Number of size standards reviewed
Number of size standards increased
Number of size standards decreased
Number of size standards maintained

21
Mining, Quarrying, and Oil and Gas Extraction
24
15
9
0

22
Utilities
11
11
0
0

31-33
Manufacturing
360
123
187
50

48-49
Transportation and Warehousing
15
5
8
2

51
Information
12
3
7
2

54
Professional, Scientific and Technical Services
7
1
3
3

Other
Agriculture, Forestry, Fishing and Hunting (Sector 11); Finance and Insurance (Sector 52); Administrative and Support, Waste Management and Remediation Services (Sector 56)
3
1
2
0

Total

432
159
216
57

In the April 2022 proposed rule, SBA discussed the impacts of the COVID-19 pandemic on small businesses and greater society. Recognizing the wide-ranging economic impacts of the pandemic, SBA decided not to lower any size standards for which the analysis suggested lowering them. Instead, SBA proposed to maintain all size standards for industries in which the analytical results supported a decrease or no change to size standards and adopt all size standards for which the analytical results supported an increase to size standards, except for nine industries where SBA's evaluation of dominance in field of operation indicated that size standards should be maintained at the current levels to exclude dominant firms and one industry for which SBA proposed to adopt a smaller increase to the size standard also to exclude dominant firms.

In the April 2022 proposed rule, SBA also evaluated the 500-employee size standard applicable to nonmanufacturers participating in the Federal contracting market. SBA's regulations at 13 CFR 121.406 require small business concerns to meet certain requirements when they offer to the Government an end item they did not manufacture, process, or produce. These requirements are known as the nonmanufacturer rule. To qualify for a Federal Government supply contract set aside for small business, a nonmanufacturer must have an average of 500 or fewer employees over the past 24 months, be primarily engaged in wholesale or retail trade activities and supply the product of a U.S. small

manufacturer.
2

In the proposed rule, SBA proposed to retain the 500-employee size standard under the nonmanufacturer rule.

2
On June 6, 2022, SBA issued a final rule implementing section 863 of the National Defense Authorization Act for Fiscal Year 2021, Public Law 116-283, which changed the averaging period for calculating employees for SBA's employee-based size standards from 12 months to 24 months (87 FR 34094).

In the Request for Comments section of the proposed rule, SBA requested comments on the appropriateness of the current 500-employee size standard under the nonmanufacturer rule and suggestions for alternative measures to an employee-based size standard that would be more appropriate for size determination of nonmanufacturers.

SBA also sought comments on its proposal to increase size standards for 150 industries and retain the current size standards for the remaining 282 industries or subindustries (“exceptions”) in Sector 31-33 and other sectors with employee-based size standards (excluding Wholesale Trade and Retail Trade Sectors). Specifically, SBA requested comments on whether the proposed revisions are appropriate for the industries covered by the proposed rule; whether the decision not to lower any size standards is justified by considerations of impacts of the COVID-19 pandemic; whether the equal weighting of individual factors to derive an industry size standard is appropriate; and whether the data sources used in developing proposed size standards were appropriate or sufficient. SBA also sought comments on its evaluation of specific industries or subindustries (“exceptions”), including the Information Technology Value Added Resellers (ITVAR) exception to NAICS 541519 (Other Computer Related Services), NAICS 482111 (Line Haul Railroads), NAICS 482112 (Short Line Railroads), the Environmental Remediation Services (ERS) exception to NAICS 562910 (Remediation Services), and certain industries for which SBA adjusted calculated size standards based on its analysis of dominance in field of operation.

To evaluate the impact of the changes to size standards adopted in this final rule on the Federal contracting market and SBA's loan programs, SBA analyzed FPDS-NG data for fiscal years 2018-2020 and internal data on its guaranteed and disaster loan programs for fiscal years 2018-2020. The results of this analysis can be found in the Regulatory Impact Analysis section of this final rule.

In accordance with 13 CFR 121.102(e), SBA advises eligible parties of the option to file a petition for reconsideration of a revised, modified, or established size standard at SBA's Office of Hearings and Appeals (OHA) within 30 calendar days after publication of this final rule in accordance with 15 U.S.C. 632(a)(9) and 13 CFR 134 Subpart I. OHA can be reached using the following contact information: by mail at U.S. Small Business Administration, Office of Hearings and Appeals, 409 Third St. SW, Eighth Floor, Washington, DC 20416, by email at
ohafilings@sba.gov,
by phone at (202) 401-8200 TTY/TRS: 711, or by fax at (202) 205-7059.

Discussion of Comments

SBA received a total of 49 comments on the proposed rule, 37 of which pertained to SBA's proposal to increase the size standard for the ERS exception to NAICS 562910 from 750 employees to 1,000 employees. Of the 37 comments pertaining to the ERS exception, 28 opposed SBA's proposed increase to the size standard and nine supported SBA's proposal. SBA also received five comments pertaining to general size standards issues, two comments that pertained to SBA's proposal to retain the 500-employee size standard under its nonmanufacturer rule, one comment on the ITVAR exception to NAICS 541519, one comment on SBA's proposed size standards for power generation industries, one comment on NAICS 315210 (Cut and Sew Apparel Contractors), one comment on NAICS 333310 (Commercial and Service Industry Machinery Manufacturing), and one comment that was outside the scope of the rule.

As mandated by section 1344 of the Jobs Act, SBA is required to hold not less than two public forums during its quinquennial review of size standards. SBA held two virtual public forums on size standards to update the public on the status of the ongoing second five-year review of size standards and to consider public testimony on changes contained in the April 26, 2022, proposed rule. The two virtual public forums on size standards were held on June 14, 2022, and on June 16, 2022. The comments received during the virtual public forums are included in the count of comments above. All comments to the proposed rule, including those received as part of the virtual public forums, are available at
www.regulations.gov
(RIN 3245-AH09) and are summarized and discussed by topic below.

Comments Received During SBA's Virtual Public Forums on Size Standards

As explained in the Discussion of Comments section above, on June 14 and June 16, 2022, SBA held a series of two virtual public forums on size standards to update the public on the status of the ongoing second five-year review of size standards and to consider public testimony on proposed changes contained in the April 26, 2022, proposed rule. Over the course of the two days, of 87 total participants, SBA received testimony from eight commenters, of which seven provided comments pertaining to the SBA's proposal to increase the size standard for the ERS exception from 750 employees to 1,000 employees and one provided comments pertaining to SBA's increases to size standards generally. Of the seven comments that pertained to the ERS exception, one commenter expressed support for the SBA's proposed increase to the size standard from 750 employees to 1,000 employees, while six commenters opposed the proposed increase, asking for a lower size standard.

Regarding the public forum comments pertaining to the ERS exception, one commenter supporting the SBA's proposed change expressed that by raising the size standard to 1,000 employees, SBA will support the creation of a healthy industrial base of ERS providers for Federal clients and make it easier for small businesses to build the strength and capabilities needed to grow and successfully graduate from small business status. This commenter also urged SBA to consider adopting a size standard of 1,200 employees based on SBA's analysis in the proposed rule of all firms operating under the ERS exception regardless of whether ERS was their primary business activity.

Commenters opposed to SBA's proposed increase to the size standard for the ERS exception expressed that SBA's proposed change would adversely impact smaller small businesses. One commenter also argued that SBA's reliance on Federal contracting data for fiscal years 2016-2018 led the Agency to make incorrect conclusions about industry trends following SBA's prior increase to the ERS size standard from 500 employees to 750 employees, which resulted in SBA proposing a size standard above what SBA's analysis would support if more recent data were used. Specifically, the commenter pointed out that part of SBA's rationale for increasing the size standard for the ERS

exception is to address the decline in small business participation that occurred during fiscal years 2016-2018; however, the commenter maintained that, based on the latest available data, small business participation has increased significantly since that period. The commenter further explained that one reason for the lag between SBA's previous increase to the size standard for ERS and a corresponding increase in small business participation in the Federal market could be due to the nature of the Federal Government's procurement process in general which in some cases could take months, if not years, to award contracts due to protests, shifting agency priorities, funding levels, and other issues. Moreover, this commenter raised concerns that the Department of Energy's (DOE) reliance on management and operating (M&O) contractors, of which most are large businesses, may have skewed SBA's results. The commenter argued that if SBA excludes DOE's M&O contracts under the ERS exception from its analysis of industry factors, small business participation would be far more robust than what SBA reported in the proposed rule.

Another commenter expressing similar concerns about SBA's use of data from fiscal years 2016-2018 to measure small business participation in the Federal market also urged SBA to consider startup costs in its analysis of the industry size standard and utilize more recent data from the Engineering News-Record (ENR) (an industry trade publication) of the top 200 ENR firms in the industry when describing the economic characteristics of ERS firms. Another commenter urged SBA to consider the Environmental Protection Agency's (EPA) Region 2 Superfund program as a representation of the NAICS 562910 remediation industry. The commenter argued that these program data demonstrate the ability of firms well under the current 750-employee size standard to fulfill the Federal Government's small business remediation requirements; thus, it is unnecessary for SBA to increase the size standard beyond the current threshold as the added competition from larger firms could impact the number of opportunities available for smaller small firms that are already thriving under the current 750-employee size standard. SBA received three comments expressing agreement with this commenter, specifically in support of the notion that the current size standard of 750 employees is already appropriate.

Besides comments pertaining to the ERS exception, during the public forums on size standards, SBA also received one comment from a business operating under NAICS 561110 (Office of Administrative Services) pertaining to SBA's review of size standards generally. The commenter opposed any increases to size standards at this time, citing concerns about an impending economic recession, category management impacts, and best-in-class requirements, which together, reduce small business opportunities and eventually the total number of small businesses participating in the Federal market. The commenter urged SBA to help small businesses facing these concerns by improving its engagement efforts through increased access to financial assistance and other support rather than increasing size standards.

The comments received during the virtual public forums that pertain to the ERS exception closely mirror the public submissions received electronically through the
www.regulations.gov
portal. In fact, many commenters at the virtual public forums also submitted more detailed comments in writing, elaborating on their oral testimony. Thus, SBA is addressing these comments as part of its summary and response to comments under the Comments to the Exception to NAICS 562910 (Environmental Remediation Services) section of this final rule. Similarly, SBA responds to the comment opposing increases to size standards generally as part of its summary and response to comments under the General Comments on SBA's Proposed Changes to Size Standards section of this final rule.

Comments on SBA's Proposed Changes to Power Generation Industries

SBA received one comment from a national trade association representing nearly 900 local electric cooperatives and other rural electric utilities supporting SBA's proposed changes to size standards for industries under NAICS Sector 22 (Utilities). Specifically, the association agreed with SBA's decision to maintain the current size standard for NAICS 221116 and adopt adjusted calculated increases to size standards for NAICS 221111, 221112, 221113, 221114, 221115, 221116, 221117, 221118, and 221210 based on SBA's analysis of dominance in field of operation.

SBA Response

SBA appreciates the association's comments supporting SBA's proposed size standards for several select industries under Sector 22, Utilities. SBA agrees that the proposed size standards are appropriate in terms of industry market conditions in those industries and believes that the changes will ensure access to SBA's programs for the intended beneficiaries within these industries while excluding the largest and potentially dominant firms from being considered small. Thus, in the absence of opposing comments, SBA is adopting the proposed size standards for Sector 22 industries, as proposed.

Comments on the Federal Procurement Size Standard for Nonmanufacturers

SBA received one comment, expressing support for SBA's proposal to maintain the current 500-employee size standard for nonmanufacturers. The commenter expressed concern that if SBA were to adopt a receipt-based size standard, as explored by SBA in the proposed rule, thousands of firms that currently qualify as small under the 500-employee nonmanufacturer size standard would lose their eligibility to seek set-aside procurements for small businesses. The commenter further explained that a receipts-based size standard would likely limit sales volume for most resellers while also impacting their ability to maintain satisfactory employment levels. Thus, the commenter urged SBA to retain the current 500-employee size standard for nonmanufacturer resellers.

SBA also received one comment opposing SBA's proposal to maintain the current 500-employee size standard for nonmanufacturers. The commenter believed that SBA provided an insufficient and non-compelling rationale for not adopting the calculated size standard of 550 employees for nonmanufacturers, and instead proposing to maintain the current 500-employee size standard. Specifically, the commenter expressed that SBA's rationale to maintain the size standard simply because it is familiar to the industry and working well in practice sets a bad and arbitrary precedent. Thus, the commenter urged SBA to follow the results of its analysis and increase the size standard for nonmanufacturers to 550 employees, as suggested by the results. This commenter also expressed support for maintaining an employee-based size standard for nonmanufacturers rather than adopting a receipts-based size standard.

SBA Response

SBA agrees with commenters that an employee-based size standard is most appropriate for nonmanufacturers. In the proposed rule, as an alternative, SBA calculated a receipts-based size standard of $27 million for nonmanufacturers. However, although SBA evaluated a receipt-based size standard for nonmanufacturers, SBA

believes that adopting a receipts-based size standard, instead of an employee-based size standard, would be inappropriate for several reasons. Specifically, the Small Business Act provides that the size of manufacturing firms be based on the number of employees and that the size of services firms be based on average annual receipts. Adopting a receipts-based size standard under the nonmanufacturer rule, which currently applies only to Government acquisitions for supplies, would cause many manufacturing concerns supplying products to the Government as nonmanufacturers under the nonmanufacturer rule to be evaluated under a receipts-based size standard, which would be contrary to the requirements of the Small Business Act. Moreover, based on data from the 2017 Economic Census, SBA determined that under the calculated $27 million receipts-based size standard, more than 35,000 firms would lose their small business status they currently enjoy under the 500-employee nonmanufacturer size standard. Thus, as proposed, SBA is maintaining an employee-based size standard for nonmanufacturers.

With respect to the comment petitioning SBA to adopt 550 employees as the size standard for nonmanufacturers as suggested by SBA's analytical results, SBA disagrees that its rationale for maintaining the 500-employee size standard is arbitrary. As explained in the proposed rule, the analytical results support raising the size standard for nonmanufacturers from 500 employees to 550 employees. However, to maintain continuity with general public familiarity with and long acceptability of the 500-employee nonmanufacturer size standard, SBA proposed to maintain the current 500-employee size standard. In the proposed rule, SBA clarified why it believed that the 500-employee size standard is appropriate and working well for the majority of firms to which it applies, explaining that the 500-employee size standard for nonmanufacturers is also the most common size standard among the manufacturing industries (NAICS Sector 31-33) where some manufacturers bid on supply contracts under which they do not propose to produce the particular product to be supplied with their own labor force, notwithstanding that they are capable of doing so, and therefore must qualify as small businesses under the nonmanufacturer rule. Thus, SBA believes that maintaining 500 employees as the size standard for nonmanufacturers would promote consistency in its regulations and increase compliance. Therefore, in an effort to minimize the adverse consequences on manufacturers who may provide supplies to the Federal Government as nonmanufacturers under the nonmanufacturer rule, and to promote fair competition among manufacturers and nonmanufacturers, SBA is adopting the predominant 500-employee size standard for manufacturers as the size standard for nonmanufacturers who desire to bid on Federal supply contracts.

Comments on the Application of the Nonmanufacturer Rule to Information Technology Value Added Resellers (ITVARs)

SBA received one comment urging SBA to reconsider whether the nonmanufacturer rule should apply to the ITVAR exception to NAICS 541519 (Other Computer Related Services). The commenter expressed that it may be inconsistent for SBA to apply the nonmanufacturer rule to the ITVAR exception when most or all of the supplies provided by resellers under this exception would fall under one of the NAICS codes for which class waivers currently exist.

SBA Response

As stated in Footnote 18 to SBA's table of size standards at 13 CFR 121.201, for a Federal contract to be classified under the ITVAR exception and its 150-employee size standard, it must consist of at least 15 percent, but not more than 50 percent of value-added services. In addition, the offeror must comply with the manufacturing performance requirements, or comply with the nonmanufacturer rule by supplying the products of small business concerns, unless SBA has issued a class or contract specific (individual) waiver of the nonmanufacturer rule.

While SBA agrees with the commenter that class waivers may already exist for some IT products commonly purchased using the ITVAR exception, SBA also acknowledges that not all IT products procured through the ITVAR exception have a waiver of its nonmanufacturer rule. Moreover, considering the rapid pace of development in the IT industry, SBA believes that it is not unreasonable to assume that there will be new products purchased by the Federal Government using the ITVAR exception in the future that likewise do not qualify for a waiver. Thus, by eliminating the nonmanufacturer rule for the exception, SBA could disadvantage small firms who are currently offering, or plan to offer products not subject to a class waiver.

SBA also believes it would be inconsistent with the intent of the Small Business Act if ITVAR resellers could provide the supplies produced primarily by a large original equipment manufacturer (OEM), or other large manufacturers, without a waiver of the nonmanufacturer rule. SBA is concerned that without the compliance with the nonmanufacturer rule, the ITVAR exception may allow small IT resellers to simply serve as “pass throughs” for large OEMs and other large manufacturers. While SBA recognizes that the nonmanufacturer rule may work better for some products than for others, it strongly believes that the rule must apply to all supply contracts equally. Thus, like all other products and supplies, the nonmanufacturer rule must also apply to IT products, including those purchased through the ITVAR exception. Therefore, SBA is retaining the requirement that the supply component of small business set-aside ITVAR contracts must comply with the manufacturing performance requirements or the SBA's nonmanufacturer rule.

Comments on NAICS 315210 (Cut and Sew Apparel Contractors)

SBA received one comment petitioning SBA to increase the size standard for NAICS 315210 (Cut and Sew Apparel Contractors) from 750 employees to 1,500 employees. The commenter maintained that the manufacture of personal protection equipment (PPE) by Cut and Sew Apparel Contractors and the reliance of the Federal Government on this industry to satisfy strategic objectives related to sourcing PPE equipment and supplies domestically suggests that the threshold should be larger than 750 employees. Elaborating on this idea, the commenter explained that increasing the size standard would allow PPE manufacturers to sufficiently scale up their operations to meet the Federal Government's demand at lower costs. Moreover, the commenter presented data to show the high fixed costs of production and relative labor intensity of Cut and Sew Apparel Contractors relative to other manufacturing industries, which the commenter believed justified an increase to the size standard when considering the strategic importance of firms within the Cut and Sew Apparel Contractor industry. The commenter also argued that, due to the pandemic, the distribution of goods being produced by Cut and Sew Apparel Contractors has changed, and as a result,

these companies must invest significantly more in property, plant, and equipment if they are to become more cost-efficient producers of PPE. The commenter explained that in order to meet the Federal Government's demands for quality and quantity of goods for PPE purchases, companies must be larger, both in terms of capital investment and employment size. However, the commenter did not provide any data on industry and Federal contracting factors showing why the size standard for the Cut and Sew Apparel Contractor industry should be increased from 750 employees to 1,500 employees.

SBA Response

SBA disagrees with the commenter's argument that SBA should increase the size standard for NAICS 315210 based on the industry's importance to Government purchases of PPE. Specifically, SBA believes that the commenter may have mis-identified the proper NAICS code for which Government purchases of PPE normally fall under. Based on the NAICS manual, available at
www.census.gov/naics,
NAICS 315210 comprises firms that are commonly referred to as contractors that are primarily engaged in (1) cutting materials owned by others for apparel and accessories and/or (2) sewing materials owned by others for apparel and accessories. Normally, Federal Government purchases of PPE do not fall under this NAICS code as Government purchases of PPE are normally to acquire new materials and equipment, and not to modify materials and equipment already owned by the Federal Government. Instead, Government purchases of PPE usually fall under NAICS 339112 (Surgical and Medical Instrument Manufacturing), NAICS 339113 (Surgical Appliance and Supplies Manufacturing), or NAICS 423450 (Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers)
3

with Product Service Code (PSC) 6515 (Medical and Surgical Instruments, Equipment, and Supplies). Based on an analysis of FPDS-NG data for fiscal years 2018-2020, SBA found that less than 0.1 percent of Government purchases under PSC 6515 fall under NAICS 315210 while nearly 80 percent of Government purchases under PSC 6515 occur under one of the three aforementioned NAICS codes. Since PSC 6515 includes a broad range of supplies, SBA also analyzed the data by keywords to identify contracts for PPE, including respirators, masks, surgical gowns, and other PPE. SBA again found that NAICS 315210 was insignificant in terms of the total dollars obligated towards purchases of these PPE items. Thus, SBA does not agree that the industry's importance to Federal Government purchases of PPE warrants an increase to the size standard in NAICS 315210 in order to enable the industry to meet greater demand for PPE.

3
Per the requirements at 13 CFR 121.402(b)(2), acquisitions for supplies must be classified under the appropriate manufacturing or supply NAICS code, not under a Wholesale Trade or Retail Trade NAICS code, however, FPDS-NG data shows that some contracting activity may be misclassified under these NAICS codes.

Moreover, SBA's analysis of industry factors, as presented in Table 4 of the April 2022 proposed rule, supported a calculated size standard of only 450 employees for NAICS 315210. However, in response to the economic challenges presented by the COVID-19 pandemic and the measures taken by Federal Government to protect public health, SBA decided to adopt a policy to not lower size standards during the ongoing second five-year review of size standards in order to reduce the economic impacts to small businesses. Thus, SBA proposed to retain the current size standard for NAICS 315210 at 750 employees even though the data supported 450 employees. Based on the 2017 Economic Census data, 99.8 percent of firms are already small under the current 750-employee size standard for NAICS 315210. Increasing the size standard to 1,500 employees might include the largest and potentially dominant firms as small, which would run counter to the Small Business Act requirement that the size standards must exclude dominant firms from being qualified as small.

Regarding the industries that most accurately classify purchases of PPE, namely NAICS 339112 and NAICS 339113, SBA has proposed to retain the current size standard for NAICS 339112 at 1,000 employees and increase the size standard for NAICS 339113 to 800 employees based on the analysis of industry and Federal contracting factors. While the commenter submitted data on the costs of employment for firms operating under NAICS 315210 relative to other manufacturing industries, the provided data are not at the 6-digit industry level and do not demonstrate that SBA's analysis of NAICS 339112 and 339113 is insufficient. Thus, for the above reasons, SBA is not adopting the commenter's recommendation to increase the size standard for NAICS 315210 from 750 employees to 1,500 employees, nor is SBA adopting 1,500 employees as the size standard for other three NAICS codes under which solicitations for PPE are normally categorized.

Comments on the Exception to NAICS 562910 (Environmental Remediation Services)

As explained above in the Discussion of Comments section of this final rule, SBA received a total of 37 comments pertaining to SBA's proposal to increase the size standard for the Environmental Remediation Services (ERS) exception to NAICS 562910 from 750 employees to 1,000 employees. Of the 37 comments pertaining to the ERS exception, 28 (including six comments opposing SBA's proposal received during SBA's virtual public forums on size standards) opposed SBA's proposed increase and nine (including one comment supporting SBA's proposal during the virtual public forums) supported SBA's proposal. Below, SBA summarizes and responds to comments supporting the SBA's proposed change to the ERS size standard, then summarizes and responds to comments opposing the SBA's proposed change.

Comments Supporting SBA's Proposed Change to the ERS Exception

A total of nine comments were received supporting SBA's proposal to increase the size standard for the ERS exception from 750 employees to 1,000 employees. One commenter supporting SBA's proposed increase to the size standard argued that SBA's current 750-employee size standard is too restrictive and has been a detriment to many companies in the industry. The commenter expressed that adopting a 1,000-employee size standard would remove the restraint and allow for further growth for companies without forcing them to prematurely graduate from the small business status and to compete with larger firms with more resources when they exceed the size standard.

An additional four commenters, submitting nearly identical comments, supported SBA's proposed increase to the ERS size standard for similar reasons, expressing that SBA's proposed increase would allow additional firms to participate in Federal contracting as small businesses, increase small business competition, and ultimately reverse the downward trend in small business share of ERS contract dollars from fiscal years 2013 to 2018. These commenters further expressed that their business would benefit from SBA's proposed change due to the increased capabilities they could achieve under a larger size standard which would allow them to take on larger and more complex remediation projects. One

commenter also supported SBA's proposal based on the belief that the Federal Government will have access to an expanded pool of more capable small businesses to meet the demand for the surge in ERS requirements expected as part of the implementation of the Infrastructure Investment and Jobs Act (Pub. L. 117-58, November 15, 2021). Three commenters petitioned SBA to increase the size standard for the ERS exception to 1,200 employees based on SBA's analysis in the proposed rule which showed support for a size standard as high as 1,200 employees when including data from the largest firms whose principal business activities were generally unrelated to ERS.

Referring to an opposing comment received during SBA's virtual public forums on size standards that urged SBA to exclude the Department of Energy (DOE) contracts from its analysis of the ERS exception due to DOE's unique reliance on large M&O contractors, one commenter expressed that the notion of excluding such procurements, which are often related to nuclear remediation, is in direct contradiction to the definition of the ERS subindustry, as stated in Footnote 14 of SBA's Table of Size Standards at 13 CFR 121.201. The commenter explained that this footnote specifically lists nuclear remediation as an eligible activity and further argued that the justification for excluding DOE contracts from the analysis simply because they are dominated by large businesses is not sufficient. This commenter also opposed using the Engineering News-Record (ENR) top 200 environmental firms list as a source of industry data for evaluation of the ERS size standard as suggested by one commenter at the virtual public forums, because the data do not cover the whole industry and may contain subjective measures of revenue that do not comport with SBA's definitions.

SBA Response

SBA agrees with commenters supporting SBA's proposed increase to the size standard for the ERS exception that adopting a size standard of 1,000 employees would extend the runway for firms to grow while still allowing access to SBA's contracting and financial assistance programs. SBA also believes that increasing the size standard to 1,000 employees would improve competition in the industry and help small businesses to earn more Federal contracting dollars and compete for more complex environmental remediation projects, including those that may become newly available as a result of the Infrastructure Investment and Jobs Act.

As explained in the proposed rule, the procurement data analyzed by SBA showed that the dollars awarded by firms' employment size were concentrated among the largest firms. Specifically, small firms with less than or equal to 750 employees received about 37 percent of the total ERS dollar awards during fiscal years 2016-2018, while firms with more than 5,000 employees accounted for about 60 percent of the total ERS contract awards, with two firms alone accounting for almost 40 percent of the total awards under ERS activities. Firms between 750 employees and 5,000 employees accounted for 3.5 percent of the total ERS contract dollars. Procurement data from FPDS-NG for fiscal years 2019-2021 analyzed by SBA showed an increase in the small business share of ERS contract dollars to 43.5 percent and a decrease in the share of the largest firms (
i.e.,
those with more than 5,000 employees) to 54 percent, with two of them alone accounting for about 34 percent of total ERS dollars during that period. Firms between 750 employees and 5,000 employees accounted for remaining 2.5 percent. While the small business share of ERS contract dollars increased from about 37 percent during fiscal years 2016-2018 to about 43.5 percent during fiscal years 2019-2021, this is still smaller than the corresponding share of about 50 percent during fiscal years 2013-2015.

Thus, SBA believes that the large skewness in the distribution of ERS firms by the number of employees, the large percentage of ERS contracting dollars being concentrated among very large firms, a decrease in the small business share of total ERS awards compared with fiscal years 2013-2015, and the analysis of industry factors according to the SBA's Size Standards Methodology outlined in the proposed rule support SBA's proposal to increase the ERS size standard to 1,000 employees. SBA believes that its proposal to increase the size standard to 1,000 employees will further increase small business participation in the industry over time.

Regarding the adoption of a higher calculated size standard of 1,200 employees for the ERS industry, SBA does not believe that the calculated size standard of 1,200 employees accurately reflects the economic characteristics of firms primarily engaged in the business activities related to the ERS exception since this calculation was based on untrimmed data, and thus, included very large firms whose primary activity was likely unrelated to the ERS exception. Moreover, in response to comments pertaining to using the ENR data on the top 200 environmental firms, SBA agrees with commenters supporting SBA's increase to the ERS size standard that this dataset is not comprehensive enough for SBA's size standards purposes. For example, SBA's analysis of the ERS industry included 974 firms participating in Federal contracting under the exception to NAICS 562910 during fiscal years 2019-2021, while the ENR dataset suggested by the commenters only includes the top 200 environmental firms.
4

In order to reliably evaluate the size standard of any industry, SBA must rely on comprehensive data that is representative of the economic trends of the entire industry, rather than only the top firms.

4
974 is the number of firms after the removal of entities with null revenue and null number of employees as well as the identified Government entities and manufacturing firms. This number is the total entities participating in the ERS activity before trimming the data.

Comments Opposing SBA's Proposed Change to the ERS Exception

Of the 28 comments opposing SBA's proposed change to the size standard for the ERS exception, 27 comments expressed similar arguments for why SBA should retain the current 750-employee size standard for the ERS exception, including 21 comments submitted through the
regulations.gov
rulemaking portal, of which 20 were nearly identical, and six comments submitted orally through SBA's Virtual Public Forum on Size Standards. Many of these 27 commenters, including the 20 commenters that submitted nearly identical comments, and at least two commenters at SBA's Virtual Public Forum on Size Standards were part of a group of firms using data from FEDMINE, a business intelligence provider specializing in Federal Government contracting, as the basis for their comments. One commenter whose comment was also based on the FEDMINE report provided a list of 52 other firms that endorsed their comment. The remaining commenters that did not reference FEDMINE data provided similar reasons as those outlined by commenters using FEDMINE data for opposing SBA's proposed increase to the ERS size standard.

One commenter opposed to SBA's proposed size standard increase for the ERS exception raised issues other than those identified by the above 27 commenters, including establishing a separate NAICS industry specifically for munitions and unexploded ordnance

services. Below, SBA summarizes and responds to these opposing comments separately.

Comments Opposing SBA's Proposed Change to the ERS Exception for Similar Reasons

SBA received 27 comments petitioning SBA to retain the current 750-employee size standard for the ERS exception based on similar arguments, including six comments received during the virtual public forums on size standards and 21 comments received through the
www.regulations.gov
rulemaking portal of which 20 were almost identical. The commenters commissioned FEDMINE, a business intelligence provider specializing in Federal Government contracting, to prepare a report on their behalf regarding Federal spending under the ERS exception for fiscal years 2016-2021.

The commenters objected to SBA's proposed increase to the ERS size standard on the grounds that more recent data shows that SBA's calculation of the small business share of the Federal market under NAICS 562910 is understated, and therefore, undermines SBA's justification for increasing the size standard in order to help small businesses better compete for contracting opportunities. Specifically, according to the commenters' analysis, the amount of Federal dollars awarded to small businesses under the ERS exception increased nearly 50 percent, from about $1.4 billion in 2016 to about $2.1 billion in 2021. The commenters also provided data showing that the small business share of the ERS Federal spend increased from 35 percent in 2018 to 46 percent in 2021. The commenters argued that increasing the share of ERS Federal dollars obligated to small firms demonstrates, contrary to SBA's analysis, that the prior increase in the size standard for the exception from 500 employees to 750 employees was effective in increasing competition in the Federal market under the ERS exception (81 FR 4436 (January 26, 2016)). The commenters contended that SBA should evaluate data beyond fiscal year 2018 for purposes of analyzing the ERS exception because most Federal dollar obligations under the exception are awarded under indefinite delivery contracts (IDCs), and as such, SBA should recognize that there was a lapse of time between when the ERS size standard was increased in 2016 until IDCs were awarded and significant dollars were obligated to small businesses under the new size standard.

These commenters also maintained that the DOE's unique procurement methods, including the Agency's reliance on management and operating (M&O) contracts which are typically awarded to large firms, have a significant influence on SBA's calculations due to DOE's high proportion of total dollars obligated under the ERS exception. Thus, commenters urged SBA to exclude DOE contracts from the analysis since they do not accurately reflect market conditions outside of the DOE.

Regarding the influence of DOE's procurement trends on SBA's calculations, the commenters presented data showing the percent of DOE's ERS contracts dollars obligated to small businesses and the proportion of total ERS awards attributable to the DOE. The data submitted by commenters showed that for fiscal years 2016-2021, on average, DOE awarded only about seven percent of ERS contracting dollars to small businesses while comprising nearly 50 percent of total Federal ERS spending. The commenters maintained that unlike other Federal agencies, DOE awards nearly all ERS work through its M&O contractors, which are exclusively large businesses. For example, the commenters added, in fiscal year 2021, of the $1.2 billion that DOE awarded under the exception, only $3.2 million (0.3%) was awarded to non-M&O contracts. Subtracting the large business M&O dollars from the DOE's total ERS dollars, the commenters found that the small business share of total dollars was 97.8 percent. The commenters also argued that since most M&O contractors are joint ventures between two or more large businesses, each with employee counts far in excess of the SBA's size threshold, no reasonable increase in the ERS size standard would influence the ability of small businesses to compete at the prime level in the DOE M&O market and that the contracting dollars awarded to small business is not likely to increase simply because the number of businesses considered small under the exception has grown.

Regarding the dollars obligated to small businesses outside of DOE, the commenters presented data showing that since fiscal year 2016, the share of non-DOE ERS contract dollars awarded to small businesses increased from an average of 53 percent in fiscal years 2013-2015 to an average of 63 percent in fiscal years 2016-2018, and to an average of 78 percent in fiscal years 2019-2021.

Moreover, the commenters expressed concern with SBA's impact analysis which showed that two additional small businesses would gain access to small business set aside opportunities under the proposed 1,000-employee size standard for the ERS exception. Specifically, the commenters expressed that these newly eligible firms may adversely impact smaller small businesses competing for Federal contracts under the exception. The commenters argued that the addition of larger and more experienced firms may take away future opportunities from currently small firms that are adequately meeting small business procurement needs of Federal agencies.

During SBA's virtual public forums on size standards, SBA received comments expressing similar concerns as those outlined above regarding SBA's use of data from fiscal years 2016-2018 to measure small business participation in the Federal ERS market. One commenter also urged SBA to consider startup costs in its analysis of the industry size standard and utilize more recent data from the ENR, an industry trade publication, which describes the economic characteristics and primary business activities of the top 200 engineering/environmental firms in the industry down to the subsector level. Another commenter urged SBA to consider Environmental Protection Agency's (EPA) Region 2 Superfund program as a representation of the ERS industry. The commenter argued that these program data demonstrate the ability of small firms well under the current 750-employee size standard to fulfill the Federal Government's remediation requirements; thus, it is unnecessary for SBA to increase the size standard beyond the current threshold as the added competition from larger firms could impact the number of opportunities available for smaller small firms that are already thriving under the current size standard. Additional commenters at the virtual public forums agreed with the commenter's assertion that the current 750-employee size standard for the ERS exception is adequate.

For the above reasons, these commenters concluded that SBA's 2016 increase in the ERS size standard from 500 employees to 750 employees successfully increased small business participation in ERS contracts and preserved competition within the industry. As such, the commenters urged SBA to maintain the current 750-employee threshold instead of adopting 1,000 employees, as proposed.

SBA Response

SBA has reviewed the data provided by the above commenters and has determined that the results largely agree with the latest available data that SBA evaluated in response to the commenters' arguments, as we

discussed in the section
Comments Supporting SBA's Proposed Change to the ERS Exception
above. Moreover, consistent with the commenters, SBA found that DOE awards accounted for 49.2 percent of total dollars obligated under the ERS exception, of which only about 8.5 percent were awarded to small businesses through prime contracts.

However, although SBA's further analysis of the ERS industry confirmed some of the data submitted by commenters as presented above, SBA also found important differences in the commenter's position and SBA's evaluation, particularly in regards to SBA's evaluation of size standards generally and the proportion of dollars awarded by DOE under the exception through M&O contracts, a special class of contracts under which the Federal Government contracts for the operation, management, or support, on its behalf, of a government-owned or -controlled establishment devoted to one or more major government programs.

Regarding SBA's evaluation of size standards generally, in the proposed rule, SBA described its methodology for evaluating industry structure to derive size standards based on five primary factors including: average firm size (simple and weighted average firm size factors), startup costs and entry barriers (average assets size factor), industry competition (four-firm ratio factor), distribution of firms by size (Gini coefficient factor), and small business success in receiving Federal contracts under the current size standard (Federal contracting factor). As detailed in Table 4 of the April 2022 proposed rule, based on the data for fiscal years 2016-2018, SBA found that three of the five industry factors analyzed supported raising the size standard for the ERS industry above the current 750 employee threshold. Specifically, the factors for simple and weighted average firm size supported a size standard of 1,500 employees while the average assets size and Gini coefficient supported size standards of 850 employees and 1,250 employees, respectively. Only the four-firm ratio supported a size standard lower than 750 employees.

With respect to the Federal contracting factor, which measures small business participation in the Federal market in terms of the share of total Federal contract dollars awarded to small businesses relative to the small business share of an industry's total receipts, SBA found that the 750-employee size standard was appropriate. Based on SBA's Size Standards Methodology, if the share of Federal contract dollars awarded to small businesses in an industry is significantly smaller than the small business share of total industry's receipts, all else remaining the same, a justification would exist for considering a size standard higher than the current size standard. In cases, where small business share of the Federal market is already appreciably high relative to the small business share of the overall market, SBA generally assumes that the existing size standard is adequate with respect to the Federal contracting factor. Thus, regarding the ERS exception specifically, using the FPDS-NG data for fiscal years 2016-2018, SBA calculated a Federal contracting factor to be 64.2 percent, indicating the small business share of the Federal market is appreciably high relative to the small business share of industry receipts, which supported a size standard of 750 employees. Based on this result, SBA agrees with commenters that small businesses in the ERS industry are well-represented in the Federal contracting marketplace under the current 750-employee size standard and have adequate Federal contracting opportunities.

In the proposed rule, as an additional indicator, SBA also considered the change in the share of total ERS contract dollars awarded to small businesses from fiscal years 2013-2015 (under the 500-employee size standard) to fiscal years 2016-2018 (under the 750-employee size standard), finding that the small business share decreased from about 50 percent during fiscal years 2013-2015 to about 37 percent during fiscal years 2016-2018. This result, alongside SBA's analysis of industry factors demonstrated that an additional increase to the ERS size standard was warranted in order to optimize and protect the number of opportunities available to small businesses in the ERS industry. However, SBA notes that this additional indicator was not the primary basis for SBA's proposed increase to the size standard for the ERS exception. SBA's further analysis of data from fiscal years 2019-2021 showed that the small business share of total ERS contract dollars increased to 43.5 percent from 37 percent in fiscal years 2016-2018; however as previously stated, this is not a primary factor in SBA's comprehensive analysis of the ERS industry nor is it the sole basis for prescribing the size standard for the industry.

Based solely on the Federal contracting data, SBA agrees that the 750-employee size standard is appropriate for the ERS industry. However, while SBA believes that analyzing Federal contracting trends, including the Federal contracting factor, are an important component of SBA's evaluation of industry size standards, SBA's size standards methodology does not provide for the weighting of one factor more than others. In other words, the methodology establishes that SBA will give equal weights to all five primary factors that are considered in the evaluation of an industry size standard. Thus, SBA believes that the proposed size standard for the ERS industry, which is based on SBA's comprehensive evaluation of industry and Federal contracting factors, accurately reflects the economic characteristics of the industry, including the high level of small business participation in the Federal marketplace.

Regarding DOE's M&O contracts, SBA generally recognizes the special nature of M&O contracts which have received special regulatory treatment under Subpart 17.6 of the FAR. For example, when evaluating agency contracting performance under SBA's procurement scorecard assessment tool, starting from fiscal year 2015, SBA evaluates DOE's prime contracting performance by including M&O first tier subcontracts pursuant to 15 U.S.C. 644(g)(3). Thus, SBA believes commenters may be justified in requesting that SBA count DOE's M&O first tier subcontracts as prime contracts consistent with SBA's procurement scorecard methodology. However, SBA does not agree with commenters that the dollars obligated through DOE's M&O contracts should be excluded altogether from the evaluation of the industry size standard since M&O contracts are a valid and important part of the overall Federal contracting landscape, and because the DOE accounts for roughly half of total ERS contract dollars. SBA believes that excluding M&O contracts from the evaluation of size standards, particularly for purposes of calculating the Federal contracting factor, would lead to unreliable results in industries where M&O contracts are used prominently.

Moreover, SBA found that, contrary to the commenter's suggestion, it is not true that the majority of DOE contracts classified under the ERS exception are M&O contracts.
5

SBA obtained data from the DOE listing its M&O contractors and showing the proportion of total dollars awarded under the ERS exception to M&O contractors for fiscal years 2016-2021. The data showed that the DOE did not award any contracts

under the ERS exception to firms classified as an M&O contractor.

5
See Guidance on the Department of Energy Subcontracting Program,
Section 1.2 Background.

Based on data from the Electronic Subcontracting Reporting System (eSRS), SBA found that small businesses were well represented in DOE's first tier subcontracts classified under NAICS 562910. Specifically, SBA analyzed the data from fiscal years 2016-2021 and found that, when accounting for the dollars awarded to small businesses through first-tier subcontracts, about 57 percent of total dollars awarded by DOE under the ERS exception passed through to small businesses. Thus, even if SBA considered all DOE awards under the exception as M&O contracts and therefore counted the first-tier subcontracts as prime contracts, SBA believes that the evaluation would reflect a high degree of small business participation under the ERS exception, which, as explained above, is consistent with SBA's results under the proposed rule.

Nonetheless, in response to the commenters' petition, SBA conducted an analysis of the ERS industry using updated FPDS-NG data from fiscal years 2019-2021 following the same methodology as detailed in the proposed rule and in the SBA's Size Standards Methodology. SBA's analysis using the more recent data did not support a size standard lower than the SBA's proposed 1,000-employee size standard. In fact, except for the weighted average firm size, values of each industry factor based on the data for fiscal years 2019-2021 were higher than those based on the data for fiscal years 2016-2018. Although the weighted average firm size was lower in fiscal years 2016-2018, weighted average firm size still supported a 1,500-employee size standard. The Federal contracting factor based on the data for fiscal years 2019-2021 continued to support the 750-employee size standard.

Regarding petitions by commenters for SBA to use alternative sources of data to evaluate industry characteristics, specifically data from the ENR on the top 200 environmental firms and EPA's Region 2 Superfund program, SBA disagrees that these sources would provide the best representation of the ERS industry. SBA believes these data are not comprehensive enough for SBA's purposes. For example, SBA's analysis of the ERS industry included 974 firms participating in Federal contracting under the exception to NAICS 562910 during fiscal years 2019-2021, while the ENR dataset only includes the top 200 environmental firms. In order to reliably evaluate the size standard of any industry, SBA must rely on comprehensive data that is representative of the economic trends of the entire industry, rather than only the top firms, or those associated with one agency's contracting program.

SBA does not agree with the commenters that a few larger firms that would qualify as small under the proposed 1,000-employee size standard would have significant adverse impacts on small businesses under the current 750-employee size standard in terms of access to Federal opportunities to smaller small firms. The relevant data does not demonstrate that the previous increase in size standard from 500 employees to 750 employees had a significant adverse impact on small businesses below 500 employees in terms of accessing Federal small business opportunities. For example, firms below 500 employees accounted for 84 percent of total ERS dollars awarded to small businesses during fiscal years 2019-2021.

SBA believes that increasing the size standard to the proposed 1,000-employee level based on its comprehensive evaluation of industry and Federal contracting factors may increase the number of set-asides in this industry and further benefit the small firms that are already well-represented in the Federal contracting market at the current 750-employee size standard. SBA believes that increasing the size standard to 1,000 employees will expand the runway for small businesses to compete for more complex remediation projects while also ensuring that the Federal Government has access to a larger pool of qualified small businesses to select from when issuing solicitations for ERS. As such, based on SBA's evaluation of the above public comments pertaining to the ERS exception and SBA's analyses of industry and Federal contracting factors, SBA is adopting 1,000 employees as the size standard for ERS as proposed in the April 2022 proposed rule.

Comments Opposing SBA's Proposed Change to the ERS Exception for Other Reasons

One commenter opposing SBA's proposed increase to the size standard for the ERS exception from 750 employees to 1,000 employees argued that since SBA's analysis of Federal procurement data from fiscal years 2016-2018 in the proposed rule showed that the dollars obligated to small businesses decreased significantly despite an increase to the size standard from 500 employees to 750 employees in 2016, SBA should forego increasing the size standard again, and instead, pursue other methods of increasing small business participation. Specifically, the commenter petitioned SBA to task, demand, encourage and/or impose on Federal agencies higher small business participation goals. The commenter also argued that SBA's proposed size standard increase would adversely impact competition because currently small firms would find it difficult to compete with larger firms with more advanced capabilities. The commenter also urged SBA to implement rules and/or programs to support smaller firms within the ERS industry, for example, by creating a class of set-aside opportunities reserved for firms with fewer than 50 employees. The commenter also expressed concerns over what they viewed as discriminatory and inconsistent application of NAICS code selection by contracting officers when determining the applicable NAICS code for munitions response services, which are sometimes misclassified under the ERS exception rather than the general NAICS 562910 or some other more appropriate NAICS codes. The commenter maintained that while some munitions remediation projects may require engineers for planning purposes (
i.e.,
NAICS 541330) and geophysical survey and mapping services (
i.e.,
NAICS 541360), these services represent only a small portion of the contract dollars spent (usually 10-20%) on a munitions remediation project. The commenter further explained that the overwhelming majority of funds allocated to munitions remediation projects are spent on unexploded object (UXO) technicians and labor to remove and dispose of the UXOs. Thus, citing the requirements of ERS solicitations under Footnote 14, the commenter argued that, since greater than 50 percent of the work related to munitions remediation would be attributable to a single NAICS code, the requirements for classifying the solicitation under the ERS exception are not met. To remedy the misclassification of contracts for munitions remediation services, the commenter recommended that SBA create a separate NAICS code for munitions and UXO services and issue guidance to contracting officers on the appropriate use of the ERS exception.

SBA Response

SBA disagrees with the comment that SBA should forego increasing the size standard for the ERS exception and instead pursue other methods of increasing small business participation, including higher small business goals for Federal agencies and creating separate set-aside opportunities for smaller small firms. SBA believes that establishing appropriate size standards

for industries based on its Size Standards Methodology is not mutually exclusive to conducting other engagement efforts to increase small business participation.

Moreover, SBA believes that the aforementioned comment is largely beyond the scope of this rulemaking as the proposed rule did not propose any changes to SBA's goaling guidelines for Federal agencies, nor did SBA propose establishing a separate class of set-aside opportunities for smaller small businesses. By increasing the size standard for the ERS exception to 1,000 employees, SBA will extend the runway for firms to grow while also ensuring that small businesses retain access to SBA's contracting and financial assistance programs. Increasing the size standard to 1,000 employees will also improve competition in the industry and help small businesses to earn more Federal contracting dollars and compete for and perform more complex environmental remediation projects.

Regarding the misclassification of munitions remediation projects under the ERS exception rather than the general NAICS 562910, or some other more appropriate NAICS codes, SBA notes that it is ultimately the responsibility of the contracting officer to designate the proper NAICS code based on the principal purpose of the product or service being acquired (13 CFR 121.402(b)). SBA does not believe that changes to size standards, including the creation of new NAICS industries or exceptions, is an appropriate tool to address incorrect NAICS code selections by contracting officers. More importantly, SBA does not have authority to create new NAICS codes. SBA has established a process for affected parties to appeal with SBA's Office of Hearings and Appeal (OHA) a contracting officer's NAICS code designation in its regulations at 13 CFR 121.1101. SBA encourages impacted firms to use this process when they believe that a contracting officer has miscategorized a solicitation under an improper NAICS code.

For the reasons stated above, SBA is not adopting the recommendations of the commenter and is instead adopting 1,000 employees as the size standard for the ERS exception, as proposed in the proposed rule.

General Comments on SBA's Proposed Changes to Size Standards

SBA received four comments pertaining to its proposed changes to size standards generally, including one comment submitted orally as part of SBA's virtual public forum on size standards. Of the four comments received, two commenters supported SBA's proposed changes to size standards while two commenters opposed the SBA's proposal. One commenter supported SBA's increases to size standards, specifically for industries under NAICS Sector 54, but only for agencies other than the Department of Defense (DOD). The commenter expressed concern that complex compliance requirements and other factors make it too costly for small businesses to compete against larger established businesses and that increases in the size thresholds would only exacerbate this problem. The commenter did not specify which size levels would be more appropriate for the Sector 54 industries covered under this rule or offer data in support of their position. Another commenter supported SBA's proposed changes to size standards because they believed the changes would be beneficial to all small businesses, particularly to those involved in government contracting.

Regarding the opposing comments, one commenter expressed opposition to SBA's increases to size standards in general, specifically for dump truck operators due to the increased competition that small operators face from larger mid-sized trucking firms. The commenter also urged SBA to look into the commercial insurance industry which has, according to the commenter, more than doubled insurance rates over a timespan of just a few months. The commenter did not specify which NAICS codes were the subject of their comment, nor did they recommend any actions SBA should take to address their comment on the commercial insurance industry.

SBA also received one comment opposed to SBA's changes to size standards from a business operating under NAICS 561110 (Office Administrative Services). The commenter opposed any increases to size standards at this time, citing concerns about an impending economic recession, category management impacts, and best-in-class requirements which together reduce small business opportunities and the total number of small businesses. The commenter urged SBA to help small businesses facing these concerns by improving its engagement efforts through increased access to financial assistance and other support rather than increasing size standards.

SBA Response

SBA agrees with commenters supporting SBA's proposed changes to size standards that the proposed changes are beneficial to small businesses and will increase the number of Federal contracting opportunities available for small businesses. However, SBA disagrees with the comment supporting SBA's proposed changes in Sector 54, but only for agencies other than DOD. SBA does not believe that size standards should differ among Federal agencies based on the contracting preferences or requirements of each agency as this would result in a complicated regime of size standards that may fluctuate along with an agency's budget and priorities instead of the economic characteristics of the industry in which a firm operates. Moreover, to evaluate the size standards for industries within Sector 54, SBA relied on its size standards methodology. SBA's size standards methodology describes how its analyses of various industry and program factors are used to establish and revise size standards based on the latest data available. Thus, SBA believes that the size standards adopted in this final rule, including for industries within Sector 54, appropriately reflect the intended beneficiaries of SBA programs. Thus, SBA is adopting the size standards for industries in Sector 54 without change.

SBA also disagrees with the comment that expressed opposition to SBA's increases to size standards in general, but specifically for dump truck operators, urging SBA to take action to address increased insurance costs imposed by the commercial insurance industry. SBA believes that this comment is out of the scope of this rulemaking as dump truck operators normally operate under NAICS 484220 (Specialized Freight (except Used Goods) Trucking, Local), NAICS 532120 (Truck, Utility Trailer, and RV (Recreational Vehicle) Rental and Leasing), or NAICS 562119 (Other Waste Collection), all of which have receipts-based size standards and were not covered under the proposed rule. Moreover, SBA does not have the authority to regulate the commercial insurance industry, which operates mostly under industries with receipt-based size standards not covered under this rule. It is also unclear how an adjustment to size standards within the commercial insurance industry would translate to lower insurance premiums for small business owners. Thus, SBA is not adjusting the size standards for any industries in response to this comment.

SBA also disagrees with the comment opposing any increases to size standards based on various concerns including the broader economic environment and certain Federal contracting trends that are reducing opportunities for small businesses. SBA believes that all small

businesses will benefit under a size standard that is appropriate to their industry. SBA's changes to size standards help small businesses to remain competitive in the Federal market and ensure that SBA's services go to their intended beneficiaries. Moreover, Table 9 of this final rule, Impacts of Increasing Size Standards, below, demonstrates the benefits of size standards increases, which would remain unrealized if SBA were to not adopt any increases to size standards. For example, based on its impact analysis, SBA estimates that increasing size standards would result in additional contracting opportunities for more than 100 small businesses worth nearly $257 million. Thus, based on SBA's estimation of the positive net benefits accruing to small businesses as a result of the changes to size standards, SBA disagrees with the commenter that increases to size standards are harmful to small businesses. Therefore, SBA is adopting proposed increases to size standards as presented in the proposed rule.

Comments Pertaining to Other Issues

SBA received three comments pertaining to issues other than those already discussed above. One commenter, representing an optics manufacturer, in anticipation of SBA's adoption of Office of Management and Budget's (OMB) NAICS 2022 industry structure, petitioned SBA to adopt 1,000 employees as the size standard for NAICS 333310, which is a newly defined industry under NAICS 2022 encompassing elements from NAICS 333314, 333316, and 333318. The commenter argued that adopting the higher size standard would expand the runway for small businesses in this industry to compete against a greater number of large competitors with greater resources. Another commenter petitioned SBA to require all United States Department of Agriculture (USDA) regulated entities with current USDA certification status to be available for periodic surveys and questionnaires regarding their ability to spot, detect and report human trafficking. Another commenter petitioned SBA to reconsider the current minimum and maximum size threshold values for employee-based size standards. The commenter expressed concern with SBA's language in the proposed rule describing the minimum size standard as the size an established small business should be to have adequate capabilities and resources to be able to compete for and perform Federal contracts, but does not account for small businesses that are newly formed or just starting operations. The commenter maintained that, contrary to SBA's language, as small businesses adopt new technologies and innovation, it is possible to have adequate capabilities and resources to perform Federal contracts without a high employee count. Thus, the commenter urged SBA to explore measures such as financial statements, sales revenue, years in business and other applicable methods to determine capability and competency. The commenter also argued that SBA's minimum thresholds affect small business access to Federal procurement.

SBA Response

SBA agrees with the comment petitioning SBA to adopt 1,000 employees as the size standard for NAICS 333310 under the NAICS 2022 industry structure. On July 5, 2022, SBA published a proposed rule in the
Federal Register
with proposed revisions to size standards based on OMB's NAICS 2022 structure (87 FR 40034). In the proposed rule, SBA proposed 1,000 employees as the size standard for NAICS 333310 and adopted the proposed size standard in a final rule, effective October 1, 2022 (87 FR 59240; September 29, 2022). In this final rule, SBA is adopting changes to size standards based on the NAICS 2017 structure and applying the adopted changes to the recently adopted NAICS 2022 structure. SBA's NAICS adoption analysis, presented in this final rule under the section “Applying the Adopted Changes to the NAICS 2022 Structure,” supports adopting 1,000 employees as the size standard for NAICS 333310 based on SBA's established NAICS adoption methodology.

Regarding the comment petitioning SBA to establish reporting requirements for certain operators under USDA's regulations, SBA notes that it does not have authority to regulate the trucking industry, nor does the Agency have purview over any USDA's certification programs. Thus, SBA has determined that this comment is totally outside the scope of this final rule.

Regarding the comment petitioning SBA to reconsider the current minimum and maximum threshold values for employee-based size standards, SBA evaluated employee-based size standards under this rule using its “Size Standards Methodology” (Methodology), issued on April 11, 2019, and available at
www.sba.gov/size.
SBA's Methodology provides a detailed description of its analyses of various industry and program factors and data sources, and how the agency uses the results to establish and revise size standards. Prior to finalizing the revised Methodology, SBA issued a notification in the April 27, 2018, edition of the
Federal Register
(83 FR 18468) to solicit comments from the public and notify stakeholders of the proposed changes to the Methodology. SBA considered all public comments in finalizing the revised Methodology. For a summary of comments and SBA's responses, refer to the SBA's April 11, 2019,
Federal Register
notification of the issuance of the final revised Methodology (84 FR 14587).

Pursuant to the Methodology, SBA has established 250 employees and 1,500 employees, respectively, as the minimum and maximum size standard levels for Manufacturing and other industries (excluding Wholesale and Retail Trade) with employee-based size standards. Accordingly, SBA will not generally propose or adopt a size standard that is either below the minimum level or above the maximum, even though the calculations yield values below the minimum or above the maximum levels. As stated in the proposed rule, the minimum size standard reflects the size an established small business should be to have adequate capabilities and resources to be able to compete for and perform Federal contracts (but does not account for small businesses that are newly formed or just starting operations). On the other hand, the maximum size standard represents the level above which businesses, if qualified as small, would outcompete much smaller businesses when accessing Federal small business assistance. SBA notes that SBA's table of size standards at 13 CFR 121.201 only defines the largest a business can be and still be considered small. As such, although SBA uses 250 employees as the minimum size threshold for SBA's analysis of size standards, firms with less than 250 employees may still qualify as small businesses since they would be below the size threshold for their respective industry. Thus, SBA does not agree with the commenter that maintaining a minimum threshold for purposes of analysis of industry factors disadvantages small firms below the minimum threshold or excludes them from contracting opportunities. Moreover, SBA believes that this comment is likely beyond the scope of this rulemaking as the proposed rule did not propose any changes to SBA's Size Standards Methodology, which was finalized through notice and comment process in April 2019. SBA notes that the size standards reflect the maximum

size a business can be to be considered small.

Summary of Adopted Revisions to Size Standards

Based on the evaluation of public comments it received on the proposed rule and on its analyses of industry and Federal contracting factors using the latest available data when the proposed rule was prepared along with considerations of impacts of the ongoing COVID-19 pandemic, in this final rule, SBA is adopting the size standards as proposed in the April 26, 2022, proposed rule. Thus, SBA is increasing size standards for 150 industries under NAICS 2017, including 10 industries in NAICS Sector 21 (Mining, Quarrying, and Oil and Gas Extraction), 10 industries in NAICS Sector 22 (Utilities), 120 industries in NAICS Sector 31-33 (Manufacturing), five industries in Sector 48-49 (Transportation and Warehousing), three industries in NAICS Sector 51 (Information), and one subindustry (or “exception”) each in NAICS Sector 54 (Professional, Scientific and Technical Services) and in NAICS Sector 56 (Administrative and Support, Waste Management and Remediation Services). SBA's size standards revisions adopted in this rule can be found in Table 2, Adopted Size Standards Revisions (NAICS 2017). Also presented in Table 2 are current and calculated size standards for comparison.

Table 2—Adopted Size Standards Revisions
[NAICS 2017]

NAICS 2017 code
NAICS 2017 industry title

Current size
standard
(employees)

Calculated size
standard
(employees)

Proposed/
adopted size
standard
(employees)

212113
Anthracite Mining
250
600
250

212210
Iron Ore Mining
750
1,400
1,400

212222
Silver Ore Mining
250
1,100
250

212230
Copper, Nickel, Lead, and Zinc Mining
750
1,400
1,400

212291
Uranium-Radium-Vanadium Ore Mining
250
900
250

212299
All Other Metal Ore Mining
750
1,250
1,250

212313
Crushed and Broken Granite Mining and Quarrying
750
850
850

212319
Other Crushed and Broken Stone Mining and Quarrying
500
550
550

212322
Industrial Sand Mining
500
750
750

212324
Kaolin and Ball Clay Mining
750
1,050
750

212325
Clay and Ceramic and Refractory Minerals Mining
500
650
650

212391
Potash, Soda, and Borate Mineral Mining
750
1,050
1,050

212392
Phosphate Rock Mining
1,000
1,350
1,000

212393
Other Chemical and Fertilizer Mineral Mining
500
600
600

212399
All Other Nonmetallic Mineral Mining
500
600
600

221111
Hydroelectric Power Generation
500
750
750

221112
Fossil Fuel Electric Power Generation
750
950
950

221113
Nuclear Electric Power Generation
750
1,150
1,150

221114
Solar Electric Power Generation
250
700
500

221115
Wind Electric Power Generation
250
1,150
1,150

221116
Geothermal Electric Power Generation
250
1,050
250

221117
Biomass Electric Power Generation
250
550
550

221118
Other Electric Power Generation
250
650
650

221121
Electric Bulk Power Transmission and Control
500
950
950

221122
Electric Power Distribution
1,000
1,100
1,100

221210
Natural Gas Distribution
1,000
1,150
1,150

311111
Dog and Cat Food Manufacturing
1,000
1,250
1,250

311119
Other Animal Food Manufacturing
500
650
650

311211
Flour Milling
1,000
1,050
1,050

311212
Rice Milling
500
750
750

311213
Malt Manufacturing
500
900
500

311221
Wet Corn Milling
1,250
1,300
1,300

311224
Soybean and Other Oilseed Processing
1,000
1,250
1,250

311225
Fats and Oils Refining and Blending
1,000
1,100
1,100

311230
Breakfast Cereal Manufacturing
1,000
1,300
1,300

311313
Beet Sugar Manufacturing
750
1,150
1,150

311314
Cane Sugar Manufacturing
1,000
1,050
1,050

311411
Frozen Fruit, Juice, and Vegetable Manufacturing
1,000
1,100
1,100

311422
Specialty Canning
1,250
1,400
1,400

311511
Fluid Milk Manufacturing
1,000
1,150
1,150

311512
Creamery Butter Manufacturing
750
1,000
750

311514
Dry, Condensed, and Evaporated Dairy Product Manufacturing
750
1,000
1,000

311611
Animal (except Poultry) Slaughtering
1,000
1,150
1,150

311824
Dry Pasta, Dough, and Flour Mixes Manufacturing from Purchased Flour
750
850
850

311920
Coffee and Tea Manufacturing
750
1,000
1,000

311930
Flavoring Syrup and Concentrate Manufacturing
1,000
1,100
1,100

311941
Mayonnaise, Dressing, and Other Prepared Sauce Manufacturing
750
850
850

311942
Spice and Extract Manufacturing
500
650
650

311991
Perishable Prepared Food Manufacturing
500
700
700

311999
All Other Miscellaneous Food Manufacturing
500
700
700

312111
Soft Drink Manufacturing
1,250
1,400
1,400

312112
Bottled Water Manufacturing
1,000
1,100
1,100

312140
Distilleries
1,000
1,100
1,100

313220
Narrow Fabric Mills and Schiffli Machine Embroidery
500
550
550

313230
Nonwoven Fabric Mills
750
850
850

314999
All Other Miscellaneous Textile Product Mills
500
550
550

315190
Other Apparel Knitting Mills
750
850
850

315990
Apparel Accessories and Other Apparel Manufacturing
500
600
600

316110
Leather and Hide Tanning and Finishing
500
800
800

316992
Women's Handbag and Purse Manufacturing
750
850
750

321113
Sawmills
500
550
550

321114
Wood Preservation
500
550
550

321211
Hardwood Veneer and Plywood Manufacturing
500
600
600

322110
Pulp Mills
750
1,050
1,050

322122
Newsprint Mills
750
1,050
1,050

323111
Commercial Printing (except Screen and Books)
500
650
650

323120
Support Activities for Printing
500
550
550

324122
Asphalt Shingle and Coating Materials Manufacturing
750
1,100
1,100

324191
Petroleum Lubricating Oil and Grease Manufacturing
750
900
900

324199
All Other Petroleum and Coal Products Manufacturing
500
950
950

325110
Petrochemical Manufacturing
1,000
1,300
1,300

325120
Industrial Gas Manufacturing
1,000
1,200
1,200

325130
Synthetic Dye and Pigment Manufacturing
1,000
1,050
1,050

325220
Artificial and Synthetic Fibers and Filaments Manufacturing
1,000
1,050
1,050

325311
Nitrogenous Fertilizer Manufacturing
1,000
1,050
1,050

325312
Phosphatic Fertilizer Manufacturing
750
1,350
1,350

325314
Fertilizer (Mixing Only) Manufacturing
500
550
550

325320
Pesticide and Other Agricultural Chemical Manufacturing
1,000
1,150
1,150

325412
Pharmaceutical Preparation Manufacturing
1,250
1,300
1,300

325520
Adhesive Manufacturing
500
550
550

325611
Soap and Other Detergent Manufacturing
1,000
1,100
1,100

325612
Polish and Other Sanitation Good Manufacturing
750
900
900

325613
Surface Active Agent Manufacturing
750
1,100
1,100

325910
Printing Ink Manufacturing
500
750
750

325991
Custom Compounding of Purchased Resins
500
600
600

325998
All Other Miscellaneous Chemical Product and Preparation Manufacturing
500
650
650

326121
Unlaminated Plastics Profile Shape Manufacturing
500
600
600

326130
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing
500
650
650

326220
Rubber and Plastics Hoses and Belting Manufacturing
750
800
800

326299
All Other Rubber Product Manufacturing
500
650
650

327211
Flat Glass Manufacturing
1,000
1,100
1,100

327410
Lime Manufacturing
750
1,050
1,050

327910
Abrasive Product Manufacturing
750
900
900

327992
Ground or Treated Mineral and Earth Manufacturing
500
600
600

327999
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing
500
750
750

331313
Alumina Refining and Primary Aluminum Production
1,000
1,300
1,300

331315
Aluminum Sheet, Plate, and Foil Manufacturing
1,250
1,400
1,400

331420
Copper Rolling, Drawing, Extruding, and Alloying
1,000
1,050
1,050

331491
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
750
900
900

331492
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)
750
850
850

331512
Steel Investment Foundries
1,000
1,050
1,050

331513
Steel Foundries (except Investment)
500
700
700

331523
Nonferrous Metal Die-Casting Foundries
500
700
700

331524
Aluminum Foundries (except Die-Casting)
500
550
550

332112
Nonferrous Forging
750
950
950

332114
Custom Roll Forming
500
600
600

332117
Powder Metallurgy Part Manufacturing
500
550
550

332215
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing
750
1,000
1,000

332439
Other Metal Container Manufacturing
500
600
600

332613
Spring Manufacturing
500
600
600

332722
Bolt, Nut, Screw, Rivet, and Washer Manufacturing
500
600
600

332812
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
500
600
600

332992
Small Arms Ammunition Manufacturing
1,250
1,300
1,300

332996
Fabricated Pipe and Pipe Fitting Manufacturing
500
550
550

333131
Mining Machinery and Equipment Manufacturing
500
900
900

333243
Sawmill, Woodworking, and Paper Machinery Manufacturing
500
550
550

333314
Optical Instrument and Lens Manufacturing
500
600
600

333924
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
750
900
900

333991
Power-Driven Hand Tool Manufacturing
500
950
950

333993
Packaging Machinery Manufacturing
500
600
600

333995
Fluid Power Cylinder and Actuator Manufacturing
750
800
800

333997
Scale and Balance Manufacturing
500
700
700

334290
Other Communications Equipment Manufacturing
750
800
800

334416
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing
500
550
550

334511
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
1,250
1,350
1,350

334512
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use
500
650
650

334514
Totalizing Fluid Meter and Counting Device Manufacturing
750
850
850

334517
Irradiation Apparatus Manufacturing
1,000
1,200
1,200

334519
Other Measuring and Controlling Device Manufacturing
500
600
600

335122
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing
500
600
600

335129
Other Lighting Equipment Manufacturing
500
550
550

335311
Power, Distribution, and Specialty Transformer Manufacturing
750
800
800

335912
Primary Battery Manufacturing
1,000
1,300
1,300

335931
Current-Carrying Wiring Device Manufacturing
500
600
600

335991
Carbon and Graphite Product Manufacturing
750
900
900

335999
All Other Miscellaneous Electrical Equipment and Component Manufacturing
500
600
600

336310
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing
1,000
1,050
1,050

336414
Guided Missile and Space Vehicle Manufacturing
1,250
1,300
1,300

336419
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing
1,000
1,050
1,050

336611
Ship Building and Repairing
1,250
1,300
1,300

336991
Motorcycle, Bicycle, and Parts Manufacturing
1,000
1,050
1,050

337125
Household Furniture (except Wood and Metal) Manufacturing
750
950
950

337214
Office Furniture (except Wood) Manufacturing
1,000
1,100
1,100

339113
Surgical Appliance and Supplies Manufacturing
750
800
800

339910
Jewelry and Silverware Manufacturing
500
700
700

339930
Doll, Toy, and Game Manufacturing
500
700
700

339991
Gasket, Packing, and Sealing Device Manufacturing
500
600
600

339994
Broom, Brush, and Mop Manufacturing
500
750
750

339999
All Other Miscellaneous Manufacturing
500
550
550

483111
Deep Sea Freight Transportation
500
1,050
1,050

483113
Coastal and Great Lakes Freight Transportation
750
800
800

483114
Coastal and Great Lakes Passenger Transportation
500
550
550

483211
Inland Water Freight Transportation
750
1,050
1,050

483212
Inland Water Passenger Transportation
500
550
550

511199
All Other Publishers
500
550
550

512230
Music Publishers
750
900
900

512250
Record Production and Distribution
250
900
900

541715 (Exception 3)
Guided Missiles and Space Vehicles, Their Propulsion Units and Propulsion Parts
1,250
1,300
1,300

562910 (Exception
Environmental Remediation Services
750
1,000
1,000

Table 3, Summary of Adopted Size Standards Revisions by Sector (NAICS 2017), summarizes the adopted changes to size standards by NAICS sector.

Table 3—Summary of Adopted Size Standards Revisions by Sector
[NAICS 2017]

Sector
Sector name

Number of
size standards
reviewed

Number of
size standards
increased

Number of
size standards
decreased

Number of
size standards
maintained

21
Mining, Quarrying, and Oil and Gas Extraction
24
10
0
14

22
Utilities
11
10
0
1

31-33
Manufacturing
360
120
0
240

48-49
Transportation and Warehousing
15
5
0
10

51
Information
12
3
0
9

54
Professional, Scientific and Technical Services
7
1
0
6

Other Sectors
Agriculture, Forestry, Fishing and Hunting; Finance and Insurance; Administrative and Support, Waste Management and Remediation Services
3
1
0
2

Total

432
150
0
282

Applying the Adopted Changes to the NAICS 2022 Structure

Under this final rule, SBA has reviewed the size standards for 56 NAICS 2017 industries or their parts with employee-based size standards (excluding employee-based size standards in Sectors 42 and 44-45) and one industry with a receipts-based size standard that were split, merged, or modified to become part of 36 new industries under OMB's NAICS 2022 changes. Overall, OMB's NAICS 2022 revisions created 111 new industries by reclassifying, combining, or splitting 156 NAICS 2017 industries or their parts.
6

6
Complete information on the relationship between NAICS 2017 and NAICS 2022 is available on the U.S. Bureau of the Census (Census Bureau) website at
https://www.census.gov/naics/.
The Census Bureau's website also provides detailed documentation on Federal notices involving the replacement of SIC with NAICS, and all subsequent NAICS updates and revisions, including both the July 2, 2021, and December 21, 2021, Federal notices regarding the NAICS 2022 revision.

Prior to issuing this final rule on employee-based size standards, SBA incorporated OMB's NAICS 2022 changes into its Table of Size Standards at 13 CFR 121.201 in a final rule, effective October 1, 2022 (87 FR 59240; September 29, 2022), using the newly adopted size standards under SBA's review of size standards under the Jobs Act. Specifically, as stated above, as part of SBA's second five-year review of size standards under the Jobs Act, SBA revised all monetary-based size standards and employee-based size standards under NAICS Sectors 42 (Wholesale Trade) and 44-45 (Retail Trade).

Of the 36 new industries with employee-based size standards (excluding Sectors 42 and 44-45) that were created under the NAICS 2022 revision, 27 were formed by combining more than one NAICS 2017 industry or industry part, often with new 6-digit codes and industry titles. Three new industries were formed by changing the 6-digit code without changing the industry title, two industries were formed by changing the title without changing the 6-digit code, and four remaining industries had either their content, definition, or content changed, usually involving parts of NAICS 2017 industries.

SBA's methodology for incorporating OMB's NAICS revisions into size standards is generally well-established. On October 22, 1999, SBA proposed to replace the Standard Industrial Classification (SIC) System with NAICS 1997 as the basis of industry definitions for its table of small business size standards (64 FR 57188). The proposed rule included a set of guidelines or rules that SBA applied to convert the size standards for industries under SIC to industries under NAICS. The guidelines primarily aimed to minimize the impact of applying a new industry classification system on SBA's size standards and on small businesses that qualified as small under the SIC-based size standards. SBA received no negative comments against the proposed guidelines. Thus, SBA published its final rule on May 15, 2000 (65 FR 30386), corrected on September 5, 2000 (65 FR 53533), adopting the resulting table of size standards based on NAICS 1997 structure, as proposed. To be consistent, SBA generally applied the same guidelines when it updated its table of size standards to adopt NAICS 2002, NAICS 2007, NAICS 2012, NAICS 2017, and NAICS 2022 revisions. In those updates as well, SBA received no adverse comments against using those guidelines, or against the resulting changes to the size standards. These guidelines to adopt OMB's NAICS revisions were also included in the SBA's “Size Standards Methodology” white paper and SBA received no adverse comments when the revised methodology was open for public comments. The applicable guidelines are shown below in Table 4, “General Guidelines to Establish Size Standards for New Industries under NAICS 2022.”

Table 4—General Guidelines To Establish Size Standards for New Industries Under NAICS 2022

If the NAICS 2022 industry is composed of:
The size standard for the NAICS 2022 industry code will be:

1. A single NAICS 2012 industry or part of a single NAICS 2012 industry
The same size standard as for the NAICS 2012 industry or part.

2. Two or more NAICS 2017 industries; two or more parts of an NAICS 2017 industry; parts of two or more NAICS 2017 industries; or one or more NAICS 2017 industries and part(s) of one or more NAICS 2017 industries, and

2a. they all have the same size standard
The same size standard as for the NAICS 2017 industries or parts.

2b. they all have the same size measure (
e.g.,
receipts, employees,
etc.
) but do not all have the same size standard

The same size standard as for the NAICS 2017 industry or part that most closely matches the economic activity described by the NAICS 2022 industry, or
The highest size standard among the NAICS 2017 industries and part(s) that comprise the NAICS 2022 industry, provided that the highest size standard does not include dominant or potentially dominant firms.

2c. they have different size measures (
i.e.,
for example, some are based on receipts and others on employees) and hence do not all have the same size standard

The same size standard as for the NAICS 2017 industry or part that most closely matches the economic activity described by the NAICS 2022 industry, or
The highest size standard among the NAICS 2017 industries and part(s) that comprise the NAICS 2022 industry, provided that the highest size standard does not include dominant or potentially dominant firms.

To apply this rule, SBA converts all size standards to a single measure (
e.g.,
receipts, employees,
etc.
) using the size measure for the NAICS 2017 industry or part(s) that most closely match the economic activity described by the NAICS 2022 industry or using the size measure that applies to most of the NAICS industries or parts comprising the NAICS 2022 industry.

Thus, in this final rule, SBA is incorporating the adopted size standards, as presented in Table 2 (above), into the table of size standards based on NAICS 2022 following the guidelines prescribed in Table 4 (above).

SBA identified 56 NAICS 2017 unique industries or their parts reviewed under this final rule that became part of 37 new industries under NAICS 2022. New size standards for the 37 new NAICS 2022 industries resulted in a reduction in size standard for eight industries under NAICS 2017, an increase to size standard for 12 industries and 2 parts of one industry, change in the size standard from employees to receipts for one industry, and no change in size standards for the remaining 35 NAICS 2017 industries or their parts. Among the 37 new industries under NAICS 2022 evaluated in this final rule, compared to the size standards adopted in the September 2022 NAICS 2022 adoption final rule, size standards increased for 10 industries and remained the same for the remaining 27 industries. Table 5, Size Standards for Industries Under NAICS 2017 Matched to NAICS 2022, below, presents these results.

Table 5—Size Standards for Industries Under NAICS 2017 Matched to NAICS 2022

NAICS 2022 code
NAICS 2022 industry title
Concordance with NAICS 2017 code
NAICS 2017 industry title (and specific piece of the NAICS 2017 industry that is contained in the NAICS 2022 industry)

NAICS 2017 standard prior to NAICS 2022 adoption
(employees or
$ million)

NAICS 2022 standard after NAICS 2022 adoption
(employees or
$ million)

NAICS 2017 standard adopted under this final rule
(employees)

NAICS 2022 standard under this final rule
(employees or
$ million)

212114
Surface Coal Mining
212111
Bituminous Coal and Lignite Surface Mining
1,250
1,250
1,250
1,250.

212113

Anthracite Mining—
Anthracite surface mining

250

250

212115
Underground Coal Mining
212112
Bituminous Coal Underground Mining
1,500
1,500
1,500
1,500.

212113

Anthracite Mining—
Anthracite underground mining

250

250

212220
Gold Ore and Silver Ore Mining

212221
212222

Gold Ore Mining
Silver Ore Mining

1,500
250

1,500

1,500
250

1,500.

212290
Other Metal Ore Mining
212291
Uranium-Radium-Vanadium Ore Mining
250
750
250
1,250.

212299
All Other Metal Ore Mining
750

1,250

212323
Kaolin, Clay, and Ceramic and Refractory Minerals Mining
212324
Kaolin and Ball Clay Mining
750
500
750
650.

212325
Clay and Ceramic and Refractory Minerals Mining
500

650

212390
Other Nonmetallic Mineral Mining and Quarrying
212391
Potash, Soda, and Borate Mineral Mining
750
500
1,050
600.

212392
Phosphate Rock Mining
1,000

1,000

212393
Other Chemical and Fertilizer Mineral Mining
500

600

212399
All Other Nonmetallic Mineral Mining
500

600

311221
Wet Corn Milling and Starch Manufacturing
311221
Wet Corn Milling
1,250
1,250
1,300
1,300.

315120
Apparel Knitting Mills
315110
Hosiery and Sock Mills
750
750
750
850.

315190
Other Apparel Knitting Mills
750

850

315250
Cut and Sew Apparel Manufacturing (except Contractors)
315220
Men's and Boys' Cut and Sew Apparel Manufacturing
750
750
750
750.

315240
Women's, Girls', and Infants' Cut and Sew Apparel Manufacturing
750

750

315280
Other Cut and Sew Apparel Manufacturing
750

750

316990
Other Leather and Allied Product Manufacturing
316992
Women's Handbag and Purse Manufacturing
750
500
750
500.

316998
All Other Leather Good and Allied Product Manufacturing
500

500

321215
Engineered Wood Member Manufacturing
321213
Engineered Wood Member (except Truss) Manufacturing
750
500
750
500.

321214
Truss Manufacturing
500

500

322120
Paper Mills
322121
Paper (except Newsprint) Mills
1,250
1,250
1,250
1,250.

322122
Newsprint Mills
750

1,050

325314
Fertilizer (Mixing Only) Manufacturing

325314

Fertilizer (Mixing Only) Manufacturing—
except compost manufacturing

500
500
550
550.

325315
Compost Manufacturing

325314

Fertilizer (Mixing Only) Manufacturing—
compost manufacturing

500
500
550
550.

325992
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing
325992
Photographic Film, Paper, Plate, and Chemical Manufacturing
1,500
1,500
1,500
1,500.

333248
All Other Industrial Machinery Manufacturing
333244
Printing Machinery and Equipment Manufacturing
750
750
750
750.

333249
Other Industrial Machinery Manufacturing
500

500

333310
Commercial and Service Industry Machinery Manufacturing
333314
Optical Instrument and Lens Manufacturing
500
1,000
600
1,000.

333316
Photographic and Photocopying Equipment Manufacturing
1,000
1,000

333318
Other Commercial and Service Industry Machinery Manufacturing
1,000

1,000

333998
All Other Miscellaneous General Purpose Machinery Manufacturing
333997
Scale and Balance Manufacturing
500
500
700
700.

333999
All Other Miscellaneous General Purpose Machinery Manufacturing
500

500

334610
Manufacturing and Reproducing Magnetic and Optical Media
334613
Blank Magnetic and Optical Recording Media Manufacturing
1,000
1,250
1,000
1,250.

334614
Software and Other Prerecorded Compact Disc, Tape, and Record Reproducing
1,250

1,250

335131
Residential Electric Lighting Fixture Manufacturing
335121
Residential Electric Lighting Fixture Manufacturing
750
750
750
750.

335132
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing
335122
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing
500
500
600
600.

335139
Electric Lamp Bulb and Other Lighting Equipment Manufacturing
335110
Electric Lamp Bulb and Part Manufacturing
1,250
1,250
1,250
1,250.

335129
Other Lighting Equipment Manufacturing
500

550

335910
Battery Manufacturing
335911
Storage Battery Manufacturing
1,250
1,250
1,250
1,250.

335912
Primary Battery Manufacturing
1,000

1,300

336110
Automobile and Light Duty Motor Vehicle Manufacturing
336111
Automobile Manufacturing
1,500
1,500
1,500
1,500.

336112
Light Truck and Utility Vehicle Manufacturing
1,500

1,500

337126
Household Furniture (except Wood and Upholstered) Manufacturing
337124
Metal Household Furniture Manufacturing
750
750
750
950.

337125
Household Furniture (except Wood and Metal) Manufacturing
750

950

513110
Newspaper Publishers
511110
Newspaper Publishers
1,000
1,000
1,000
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—
Internet newspaper publishers

1,000

1,000

513120
Periodical Publishers
511120
Periodical Publishers
1,000
1,000
1,000
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals
—Internet periodical publishers

1,000

1,000

513130
Book Publishers
511130
Book Publishers
1,000
1,000
1,000
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—
Internet book publishers

1,000

1,000

513140
Directory and Mailing List Publishers
511140
Directory and Mailing List Publishers
1,250
1,000
1,250
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—
Internet directory and mailing list publishers

1,000

1,000

513191
Greeting Card Publishers
511191
Greeting Card Publishers
1,500
1,000
1,500
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—
Internet greeting card publishers

1,000

1,000

513199
All Other Publishers
511199
All Other Publishers
500
1,000
550
1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—
All other Internet publishers

1,000

1,000

516210
Media Streaming Distribution Services, Social Networks, and Other Media Networks and Content Providers
515111
Radio Networks
$41.5 million
$41.5 million

$41.5 million.

515120

Television Broadcasting—television networks
$41.5 million

515210
Cable and Other Subscription Programming
$41.5 million

519110
News Syndicates
$32.0 million

519130

Internet Publishing and Broadcasting and Web Search Portals—
Internet broadcasting

1,000

1,000

517111
Wired Telecommunications Carriers
517311
Wired Telecommunications Carriers
1,500
1,500
1,500
1,500.

517112
Wireless Telecommunications Carriers (except Satellite)

517312

Wireless Telecommunications Carriers (except Satellite)—
Except agents for wireless telecommunications carriers

1,500
1,500
1,500
1,500.

517121
Telecommunications Resellers

517911

Telecommunications Resellers—
Except agents for wireless telecommunications resellers

1,500
1,500
1,500
1,500.

517122
Agents for Wireless Telecommunications Services

517312

Wireless Telecommunications Carriers (except Satellite)—
Agents for wireless telecommunications carriers

1,500
1,500
1,500
1,500.

517911

Telecommunications Resellers—
Agents for wireless telecommunications resellers

1,500

1,500

519290
Web Search Portals and All Other Information Services

519130

Internet Publishing and Broadcasting and Web Search Portals—
Web search portals

1,000
1,000
1,000
1,000.

519190
All Other Information Services
$30.0 million

By combining the results of Table 2 and Table 5 (above), in Table 6 (below), Adopted Size Standard Revisions (NAICS 2022), SBA presents revisions to size standards resulting from the incorporation of the adopted size standards into the NAICS 2022 structure.

Table 6—Adopted Size Standards Revisions
[NAICS 2022]

2022 NAICS Code
NAICS 2022 industry title

Current size standards
(employees)

Adopted size standards
(employees)

212210
Iron Ore Mining
750
1,400

212230
Copper, Nickel, Lead, and Zinc Mining
750
1,400

212290
Other Metal Ore Mining
750
1,250

212313
Crushed and Broken Granite Mining and Quarrying
750
850

212319
Other Crushed and Broken Stone Mining and Quarrying
500
550

212322
Industrial Sand Mining
500
750

212323
Kaolin, Clay, and Ceramic and Refractory Minerals Mining
500
650

212390
Other Nonmetallic Mineral Mining and Quarrying
500
600

221111
Hydroelectric Power Generation
500
750

221112
Fossil Fuel Electric Power Generation
750
950

221113
Nuclear Electric Power Generation
750
1,150

221114
Solar Electric Power Generation
250
500

221115
Wind Electric Power Generation
250
1,150

221117
Biomass Electric Power Generation
250
550

221118
Other Electric Power Generation
250
650

221121
Electric Bulk Power Transmission and Control
500
950

221122
Electric Power Distribution
1,000
1,100

221210
Natural Gas Distribution
1,000
1,150

311111
Dog and Cat Food Manufacturing
1,000
1,250

311119
Other Animal Food Manufacturing
500
650

311211
Flour Milling
1,000
1,050

311212
Rice Milling
500
750

311221
Wet Corn Milling and Starch Manufacturing
1,250
1,300

311224
Soybean and Other Oilseed Processing
1,000
1,250

311225
Fats and Oils Refining and Blending
1,000
1,100

311230
Breakfast Cereal Manufacturing
1,000
1,300

311313
Beet Sugar Manufacturing
750
1,150

311314
Cane Sugar Manufacturing
1,000
1,050

311411
Frozen Fruit, Juice, and Vegetable Manufacturing
1,000
1,100

311422
Specialty Canning
1,250
1,400

311511
Fluid Milk Manufacturing
1,000
1,150

311514
Dry, Condensed, and Evaporated Dairy Product Manufacturing
750
1,000

311611
Animal (except Poultry) Slaughtering
1,000
1,150

311824
Dry Pasta, Dough, and Flour Mixes Manufacturing from Purchased Flour
750
850

311920
Coffee and Tea Manufacturing
750
1,000

311930
Flavoring Syrup and Concentrate Manufacturing
1,000
1,100

311941
Mayonnaise, Dressing, and Other Prepared Sauce Manufacturing
750
850

311942
Spice and Extract Manufacturing
500
650

311991
Perishable Prepared Food Manufacturing
500
700

311999
All Other Miscellaneous Food Manufacturing
500
700

312111
Soft Drink Manufacturing
1,250
1,400

312112
Bottled Water Manufacturing
1,000
1,100

312140
Distilleries
1,000
1,100

313220
Narrow Fabric Mills and Schiffli Machine Embroidery
500
550

313230
Nonwoven Fabric Mills
750
850

314999
All Other Miscellaneous Textile Product Mills
500
550

315120
Apparel Knitting Mills
750
850

315990
Apparel Accessories and Other Apparel Manufacturing
500
600

316110
Leather and Hide Tanning and Finishing
500
800

321113
Sawmills
500
550

321114
Wood Preservation
500
550

321211
Hardwood Veneer and Plywood Manufacturing
500
600

322110
Pulp Mills
750
1,050

323111
Commercial Printing (except Screen and Books)
500
650

323120
Support Activities for Printing
500
550

324122
Asphalt Shingle and Coating Materials Manufacturing
750
1,100

324191
Petroleum Lubricating Oil and Grease Manufacturing
750
900

324199
All Other Petroleum and Coal Products Manufacturing
500
950

325110
Petrochemical Manufacturing
1,000
1,300

325120
Industrial Gas Manufacturing
1,000
1,200

325130
Synthetic Dye and Pigment Manufacturing
1,000
1,050

325220
Artificial and Synthetic Fibers and Filaments Manufacturing
1,000
1,050

325311
Nitrogenous Fertilizer Manufacturing
1,000
1,050

325312
Phosphatic Fertilizer Manufacturing
750
1,350

325314
Fertilizer (Mixing Only) Manufacturing
500
550

325315
Compost Manufacturing
500
550

325320
Pesticide and Other Agricultural Chemical Manufacturing
1,000
1,150

325412
Pharmaceutical Preparation Manufacturing
1,250
1,300

325520
Adhesive Manufacturing
500
550

325611
Soap and Other Detergent Manufacturing
1,000
1,100

325612
Polish and Other Sanitation Good Manufacturing
750
900

325613
Surface Active Agent Manufacturing
750
1,100

325910
Printing Ink Manufacturing
500
750

325991
Custom Compounding of Purchased Resins
500
600

325998
All Other Miscellaneous Chemical Product and Preparation Manufacturing
500
650

326121
Unlaminated Plastics Profile Shape Manufacturing
500
600

326130
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing
500
650

326220
Rubber and Plastics Hoses and Belting Manufacturing
750
800

326299
All Other Rubber Product Manufacturing
500
650

327211
Flat Glass Manufacturing
1,000
1,100

327410
Lime Manufacturing
750
1,050

327910
Abrasive Product Manufacturing
750
900

327992
Ground or Treated Mineral and Earth Manufacturing
500
600

327999
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing
500
750

331313
Alumina Refining and Primary Aluminum Production
1,000
1,300

331315
Aluminum Sheet, Plate, and Foil Manufacturing
1,250
1,400

331420
Copper Rolling, Drawing, Extruding, and Alloying
1,000
1,050

331491
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
750
900

331492
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)
750
850

331512
Steel Investment Foundries
1,000
1,050

331513
Steel Foundries (except Investment)
500
700

331523
Nonferrous Metal Die-Casting Foundries
500
700

331524
Aluminum Foundries (except Die-Casting)
500
550

332112
Nonferrous Forging
750
950

332114
Custom Roll Forming
500
600

332117
Powder Metallurgy Part Manufacturing
500
550

332215
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing
750
1,000

332439
Other Metal Container Manufacturing
500
600

332613
Spring Manufacturing
500
600

332722
Bolt, Nut, Screw, Rivet, and Washer Manufacturing
500
600

332812
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
500
600

332992
Small Arms Ammunition Manufacturing
1,250
1,300

332996
Fabricated Pipe and Pipe Fitting Manufacturing
500
550

333131
Mining Machinery and Equipment Manufacturing
500
900

333243
Sawmill, Woodworking, and Paper Machinery Manufacturing
500
550

333924
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
750
900

333991
Power-Driven Hand Tool Manufacturing
500
950

333993
Packaging Machinery Manufacturing
500
600

333995
Fluid Power Cylinder and Actuator Manufacturing
750
800

333998
All Other Miscellaneous General Purpose Machinery Manufacturing
500
700

334290
Other Communications Equipment Manufacturing
750
800

334416
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing
500
550

334511
Search, Detection, Navigation, Guidance, A

[Text truncated at 120,000 characters. The full text is on the page linked above.]

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3A2023-02780. Public record. Not legal advice.