# Flavored Malt Beverage and Related Regulatory Amendments (2002R-044P) > Briefs, arguments, decisions, and more. URL: https://www.frixlaw.com/law-library/documents/fr%3A04-28460 ## Record - **Collection:** Federal Register - **Document type:** Rule - **Published:** January 3, 2005 - **Citation:** 70 FR 194 ## Text DEPARTMENT OF THE TREASURY Alcohol and Tobacco Tax and Trade Bureau 27 CFR Parts 7 and 25 [TTB T.D.-21; Re: TTB Notice No. 4] RIN 1513-AA12 Flavored Malt Beverage and Related Regulatory Amendments (2002R-044P) AGENCY: Alcohol and Tobacco Tax and Trade Bureau, Treasury. ACTION: Final rule; Treasury decision. SUMMARY: The Department of the Treasury and its Alcohol and Tobacco Tax and Trade Bureau adopt as a final rule certain proposed changes to the regulations concerning the production, taxation, composition, labeling, and advertising of beer and malt beverages. This final rule permits the addition of flavors and other nonbeverage materials containing alcohol to beers and malt beverages, but, in general, limits the alcohol contribution from such flavors and other nonbeverage materials to not more than 49% of the alcohol content of the product. However, if a malt beverage contains more than 6% alcohol by volume, not more than 1.5% of the volume of the finished product may consist of alcohol derived from flavors and other nonbeverage ingredients that contain alcohol. This final rule also amends the regulations relating to the labeling and advertising of malt beverages, and adopts a formula requirement for beers. We issue this final rule to clarify the status of flavored malt beverages under the provisions of the Internal Revenue Code of 1986 and the Federal Alcohol Administration Act related to the production, composition, taxation, labeling, and advertising of alcohol beverages. This final rule also will ensure that consumers are adequately informed about the identity of flavored malt beverages. DATES: This rule is effective January 3, 2006. FOR FURTHER INFORMATION CONTACT: Charles N. Bacon, Alcohol and Tobacco Tax and Trade Bureau, Regulations and Procedures Division, P.O. Box 5056, Beverly Farms, MA 01915; telephone (978) 921-1840. SUPPLEMENTARY INFORMATION: Table of Contents Notes to Readers A. ATF-TTB Transition B. Use of Plain Language I. Background Information II. TTB Notice No. 4 III. Discussion of Specific Proposals in TTB Notice No. 4 A. Standard for Added Alcohol and Alcohol from Fermentation B. Proposed 0.5% Added Alcohol by Volume Standard for “Beer” under the IRC C. Proposed 0.5% Added Alcohol by Volume Standard for Malt Beverages under the FAA Act D. Alternative 51/49 (Majority) Alcohol Standard E. Proposed Alcohol Content Labeling Statement for Flavored Malt Beverages F. Use of Distilled Spirits Terms in Malt Beverage Labeling and Advertising G. Filing Formulas for Fermented Beverages H. Samples; Formulas and Samples for Imported Malt Beverages I. Other Issues Raised in Notice No. 4 IV. Rulemaking History V. Comments Received in Response to Notice No. 4 A. General Discussion of Comments B. Overview of Comments C. Summary of TTB Final Rule Decisions VI. Comments on Whether the Rulemaking Is Necessary and Fair A. Is There a Need to Engage in Rulemaking on this Issue? B. Fairness and Notice Issues VII. Regulatory Burden and Cost-Related Issues A. Costs of Complying with the Proposed 0.5% Standard B. Effect on Current Products and New Product Development C. Effect on Competition D. Effect on the Retail Licensing System and Overall Marketplace E. TTB Response VIII. The 0.5% Standard vs. the 51/49 Standard—Other Issues A. Comments in Favor of the 0.5% Standard B. Comments in Favor of the 51/49 Standard C. TTB Response IX. State Concerns A. Comments by State Regulatory Agencies B. Other Comments in Support of the 0.5% Standard C. Other Comments in Support of the 51/49 Standard D. TTB Response X. Mandatory Alcohol Content Labeling for FMBs A. Comments Supporting the Proposal B. Other Comments C. TTB Response XI. Use of Distilled Spirits Terms on Labels and in Advertisements A. Comments Received B. TTB Response XII. New Formula Requirements A. Fermented Products Requiring Formulas under § 25.55 B. Standards for Formula Approval C. Alcohol Information in Formulas D. Reasonable Range of Ingredients E. Formula Confidentiality F. Standard Form for Formulas G. Formula Proceedings H. Placement in the CFR XIII. Other Issues Raised by Commenters A. Information Quality Act B. “Alcohol is Alcohol” C. Marketing of FMBs to Underage Drinkers D. More Explicit Labeling of FMBs E. Establishing Another Category of Alcohol Beverages F. Other Comments XIV. Implementation Dates A. Effective Date for Compliance with the New Added Alcohol Standard B. Effect on Products in the Marketplace C. Additional TTB Comment on the Effective Date XV. Comments on the Proposed Regulatory Text; Regulatory Text Changes A. Reference to Malt Beverage Standards, §§ 7.10 and 7.11 B. Comments on Alcohol Flavoring Material Reference, §§ 7.11 and 25.15 C. Malt Beverages Above 6.0% Alc/Vol; Status of ATF Ruling 96-1 D. Changes to § 7.31 E. Reference to Standards for Beer, §§ 25.11 and 25.15 F. Other § 25.15 Issues G. Comments on Formula Proposals, §§ 25.55-25.58 XVI. Regulatory Analysis and Notices A. Executive Order 12866 B. Regulatory Flexibility Act C. Paperwork Reduction Act XVII. Drafting Information XVIII. List of Subjects XIX. Amendments to the Regulations Notes to Readers A. ATF-TTB Transition Effective January 24, 2003, section 1111 of the Homeland Security Act of 2002 (Public Law 107-296, 116 Stat. 2135), divided the Bureau of Alcohol, Tobacco and Firearms (ATF) into two new agencies, the Alcohol and Tobacco Tax and Trade Bureau (TTB) in the Department of the Treasury, and the Bureau of Alcohol, Tobacco, Firearms and Explosives in the Department of Justice. The regulation and taxation of alcohol beverages remains a function of the Department of the Treasury and is the responsibility of TTB. References to the former ATF and the new TTB in this document reflect the time frame, before or after January 24, 2003. B. Use of Plain Language In this document, “we,” “our,” and “us” refer to the Department of the Treasury and/or the Alcohol and Tobacco Tax and Trade Bureau (TTB). “You,” “your,” and similar words refer to members of the alcohol beverage industry and others to whom TTB regulations apply. I. Background Information Flavored malt beverages are brewery products that differ from traditional malt beverages such as beer, ale, lager, porter, stout, or malt liquor in several respects. Flavored malt beverages exhibit little or no traditional beer or malt beverage character. Their flavor is derived primarily from added flavors rather than from malt and other materials used in fermentation. At the same time, flavored malt beverages are marketed in traditional beer-type bottles and cans and distributed to the alcohol beverage market through beer and malt beverage wholesalers, and their alcohol content is similar to other malt beverages—in the 4-6% alcohol by volume range. Although flavored malt beverages are produced at breweries, their method of production differs significantly from the production of other malt beverages and beer. In producing flavored malt beverages, brewers brew a fermented base of beer from malt and other brewing materials. Brewers then treat this base using a variety of processes in order to remove malt beverage character from the base. For example, they remove the color, bitterness, and taste generally associated with beer, ale, porter, stout, and other malt beverages. This leaves a base product to which brewers add various flavors, which typically contain distilled spirits, to achieve the desired taste profile and alcohol level. While the alcohol content of flavored malt beverages is similar to that of most traditional malt beverages, the alcohol in many of them is derived primarily from the distilled spirits component of the added flavors rather than from fermentation. A review of approved formulas showed that more than 99% of the alcohol in some flavored malt beverages was derived from added flavorings containing distilled spirits instead of from fermentation at the brewery. Flavored malt beverages are sold under many proprietary names and include alcohol beverages such as alcoholic lemonades, alcoholic colas, cooler-type products, and other flavored alcohol beverages. In recent years, brewers have partnered with distilled spirits producers in order to label flavored malt beverages using prominent distilled spirits brand names. In ATF Ruling 96-1 (ATF Quarterly Bulletin 1996-1, p. 49), our predecessor agency announced its intention to engage in rulemaking on the issue of whether it should consider the prohibition, restriction, or limitation of the use of flavor materials containing alcohol at any stage in the production of malt beverages. Pending rulemaking, the ruling held that for malt beverages with an alcohol content in excess of 6% alcohol by volume, a maximum of 1.5% alcohol by volume could be derived from alcohol flavoring materials. Six years later, in ATF Ruling 2002-2, ATF set forth guidance on the labeling and advertising of flavored malt beverages and again reiterated its intention to engage in rulemaking on the use of alcohol flavoring materials in the production of malt beverages. In the interim, State regulatory and taxation agencies started to express concerns about the status of flavored malt beverages, and these agencies requested that ATF or TTB take action to clarify the status of these products as either malt beverages or distilled spirits. In 2002, ATF examined the formulation of 114 alcohol beverage products labeled and marketed as flavored malt beverages. ATF undertook this study to find out how these products were produced, what ingredients were used, and from where the alcohol in them was derived. This study did not examine malt beverages labeled and marketed as flavored beers, flavored ales, and so forth (such as “cherry beer” or “pumpkin ale”) since these types of malt beverages typically have the character of malt beverages and their alcohol is derived primarily from fermentation. The major results of the study are set forth in the tables below: Table 1.—Alcohol Derived From Added Alcohol Flavoring Materials Alcohol percentage derived from added alcohol favors Number of flavored malt beverages 0-25% 4 26-0% 0 51-75% >5 76-100 105 Maximum alcohol derived from added alcohol flavors: 99.98%. Total: 114 Table 2.—Volume of Beer Base Present in Flavored Malt Beverages Volume of flavored malt beverage derived from fermented beer base Number of flavored malt beverages 0-25% 95 26-50% 4 51-75% 1 76-100% 14 ATF concluded that the great majority of the alcohol in most flavored malt beverages was not derived from fermentation of malt and grain. Instead, most of the alcohol in these products was derived from distilled spirits contained in added alcohol flavors. ATF found that over 75% of the alcohol in most of the flavored malt beverages studied was derived from alcohol flavoring materials and that in some cases this figure rose to more than 99%. In contrast, the alcohol derived from flavors constituted 50% or less of the overall alcohol in only 4 of the 114 products studied. Based on the study's results, ATF also concluded that most flavored malt beverages contained very little actual beer base. Only 15 out of the 114 flavored malt beverages studied contained 51% or more by volume fermented beer; the remaining volume of those 15 products consisted of flavors, water, and other ingredients. Two of the flavored malt beverages studied contained only 1% fermented beer by volume. II. TTB Notice No. 4 On March 24, 2003, we proposed a number of regulatory changes concerning beer and malt beverages in TTB Notice No. 4 (published in the Federal Register at 68 FR 14292; corrected at 68 FR 15119). Among other things, Notice No. 4 solicited comments on whether certain products marketed as flavored malt beverages should be classified as malt beverages or distilled spirits products under the Federal Alcohol Administration Act (FAA Act) and the Internal Revenue Code of 1986 (IRC). We recognized that the answer to this question would affect the rate of tax applicable to these products, the premises on which they may be produced, and the way that the products are labeled, advertised and marketed. Furthermore, their classification as malt beverages or as distilled spirits under Federal law could affect State oversight and control of these products, since many States follow the Federal classification of alcohol beverages. Notice No. 4 included a proposal to limit the quantity of alcohol derived from added flavors or other ingredients containing alcohol to less than 0.5% alcohol by volume. The notice also requested comments on an alternative standard requiring that a malt beverage derive a minimum of 51% of its alcohol content from fermentation at the brewery, thus allowing no more than 49% of the alcohol content to be derived from added flavors containing alcohol. As discussed below, Notice No. 4 also included proposed amendments to the regulations involving the filing of formulas, and the labeling and advertising of malt beverages. III. Discussion of Specific Proposals in TTB Notice No. 4 A. Standard for Added Alcohol and Alcohol From Fermentation In Notice No. 4, we proposed to delineate how much of the alcohol content of a beer or malt beverage must be derived from fermentation at the brewery, and how much of the product's alcohol content may be derived from alcohol added through the use of flavors and other ingredients containing alcohol. Neither the IRC nor the FAA Act provides specific limits on the quantity of flavors that may be added to beer or malt beverages; nor does either statute set forth how much of the alcohol content of those products must result from fermentation at the brewery. While neither statute expressly sanctions the direct addition of distilled spirits or other alcohol to beer or malt beverages, TTB and its predecessor agencies, as set forth in ATF Rulings 96-1 and 2002-2, have historically allowed flavors, including flavors containing alcohol, to be added to these products. In Notice No. 4, TTB suggested that the definition of “beer” in the IRC, which refers to beer, ale, porter, stout, and “other similar fermented beverages,” requires that a product derive a substantial portion of its alcohol from fermentation at a brewery since the definition does not contemplate a product that derives most of its alcohol content from distilled spirits. As the ATF study referred to above demonstrated, few products marketed as flavored malt beverages derive a substantial portion, or even a bare majority, of their alcohol content from fermentation. We also stated that a similar standard should apply to the definition of a “malt beverage” under the FAA Act. The FAA Act defines a malt beverage as a product made from the fermentation of malted barley with the addition of hops. While the definition in the FAA Act allows for the addition to malt beverages of “other wholesome food products” such as flavors, we stated that we do not believe that Congress intended for these added materials to represent the dominant source of a product's alcohol content. B. Proposed 0.5% Added Alcohol by Volume Standard for “Beer” Under the IRC In Notice No. 4, TTB proposed adding to the regulations a new § 25.15 (27 CFR 25.15) that would have the effect of treating as a distilled spirits product any fermented product that contains 0.5% or more alcohol by volume derived from flavors, taxpaid wine, or other ingredients containing alcohol. As a consequence of the proposed new section, those products would be taxed and classified as distilled spirits. This proposed section also would allow the use of barley malt, malted grains other than barley, unmalted grains, sugars, syrups, molasses, honey, fruit, fruit juice, fruit concentrate, herbs, spices and other food materials in the production of a beer. It did not provide any standards for the use of these ingredients. In Notice No. 4, TTB noted that this 0.5% alcohol standard had long been used to determine whether a beverage is considered an alcohol beverage. For example, many beverages, including juice, soft drinks, and soda, contain a small amount of alcohol derived from the use of flavoring materials containing distilled spirits. As long as the overall alcohol content of the product is below 0.5% alcohol by volume, these products are not considered alcohol beverages, and are not taxed as such. If the alcohol content of the a product reaches 0.5% alcohol by volume, the product would be subject to the tax imposed on distilled spirits products, since it would fall within the statutory definition of a distilled spirits product. C. Proposed 0.5% Added Alcohol by Volume Standard for Malt Beverages Under the FAA Act In Notice No. 4, TTB proposed adding to the regulations a new § 7.11 (27 CFR 7.11) that would classify a fermented product as a malt beverage only if it contains less than 0.5% alcohol by volume derived from flavors or other ingredients containing alcohol. This proposed section would also have explicitly permitted filtration or other processing to remove color, taste, aroma, bitterness, or other characteristics derived from fermentation. We specifically solicited comments on this proposed standard and on any other standard that might be consistent with the FAA Act definition of a malt beverage. Notice No. 4 noted that the FAA Act's definition of “malt beverage” was intended to cover all products made by brewers at the time of the enactment of that Act in 1935. As already noted above, this definition requires that a malt beverage be made from the fermentation of malted barley with hops, with or without the addition of “other wholesome food products.” For years, brewers have used many substances, including starches, sugars, honey, fruits, flavors (including those containing alcohol), colors, and adjuncts to aid in fermentation, clarification, and preservation of malt beverages. TTB and its predecessor agencies have allowed these ingredients in malt beverage products. TTB and its predecessor agencies have rarely examined the question of what constitutes “wholesome food products” under the FAA Act, other than to state that the ingredients added to malt beverages must be recognized as safe for food use by the Food and Drug Administration and must have some intended purpose in malt beverage production. We and our predecessor agencies have considered flavorings containing distilled spirits to be wholesome food products and have allowed their use in producing malt beverages. The use of flavors containing distilled spirits can introduce a significant amount of distilled spirits into a malt beverage. Adding alcohol or distilled spirits in this fashion reduces the need to use fermented malt in the production of a malt beverage in order to attain alcohol content. When carried to extremes, this practice results in a product in which most of the alcohol content is derived from added flavors rather than from fermentation at a brewery. Based on the above considerations, we stated in Notice No. 4 our belief that the definition of a malt beverage in the FAA Act supports limiting the amount of alcohol that is not “made by the alcoholic fermentation * * * of malted barley with hops.” Further, we stated our belief that labeling a beverage that derives most of its alcohol content from added alcohol flavors as a malt beverage is inherently misleading since consumers expect that malt beverages derive a significant portion of their alcohol content from fermentation of barley malt and other ingredients at the brewery. D. Alternative 51/49 (Majority) Alcohol Standard Although Notice No. 4 stated that both the IRC and the FAA Act would support a 0.5% added alcohol standard, it also stated that the IRC would support the issuance of a regulation requiring that a beer or malt beverage product must derive a majority of its alcohol content from fermentation at the brewery. Accordingly, TTB sought comments on both the 0.5% standard and a 51/49 standard, which would allow up to 49% of the alcohol in a beer or malt beverage to be derived from flavors or other materials containing alcohol. E. Proposed Alcohol Content Labeling Statement for Flavored Malt Beverages In Notice No. 4, TTB suggested that, due to the unique character of these new types of flavored malt beverages, many consumers have limited experience with them. At the same time, due to their label appearance and the use of the brand names of well-known distilled spirits products, TTB believed that consumers are likely to be confused as to the actual alcohol content of the products. TTB suggested that consumers are likely to assume that some flavored malt beverages are high in alcohol content like the distilled spirits products whose brand names they bear. Likewise, while other brands of flavored malt beverages are not labeled with distilled spirits brand names, their labeling or packaging, which often resembles that of nonalcoholic beverages such as juices, sodas, bottled water, and energy drinks, is likely to confuse consumers as to their identity as alcohol beverages. To avoid consumer confusion over the alcohol content in flavored malt beverages, we proposed the addition of a new paragraph (a)(5) in § 7.22, (27 CFR 7.22), setting forth a mandatory requirement to state on the brand label the alcohol content of any malt beverage that contains any alcohol derived from added flavors or other ingredients containing alcohol. We suggested that this requirement would help consumers identify these products as alcohol beverages and would help consumers to understand that their alcohol content is similar to that of traditional malt beverages. This alcohol content labeling would also draw attention to any flavored malt beverages that might lie outside the customary 4 to 6% alcohol by volume range for malt beverages. For example, if a flavored malt beverage contained 10% alcohol by volume, alcohol content labeling would inform consumers about this important fact. Since there is no provision in the TTB regulations that uniquely identifies flavored malt beverages, we proposed that the mandatory alcohol content labeling apply to any malt beverage that contains alcohol from a source other than fermentation at the brewery. For example, if a brewer adds a flavoring containing alcohol to a malt beverage, whether it is labeled as a flavored malt beverage, as a flavored beer or ale, or as a specialty malt beverage product, the requirement to display alcohol content on the brand label would apply. We proposed no changes to the form of the alcohol content statement, to the tolerances provided in 27 CFR 7.71, or to the type size requirements in 27 CFR 7.28. F. Use of Distilled Spirits Terms in Malt Beverage Labeling and Advertising Notice No. 4 pointed out that some newer flavored malt beverages use the names of well-known brands of distilled spirits as part of their own brand names. The labels of these flavored malt beverage brands are often designed to resemble the labels of the distilled spirits brand used in their names. In addition, when first introduced, some of these flavored malt beverages bore label statements referring to the class and type of distilled spirits used in producing the nonbeverage-flavoring component. For these reasons, a number of State regulatory and taxing authorities questioned the classification of flavored malt beverages and requested that we take action to clarify their status as either malt beverages or distilled spirits. As previously noted, ATF Ruling 2002-2 clarified permissible labeling and advertising practices for flavored malt beverages, and gave brewers and importers labeling guidelines to prevent the misleading impression that flavored malt beverages are distilled spirits or contain distilled spirits. Notice No. 4 proposed to incorporate the holdings of the ruling in a new 27 CFR 7.29(a)(7) for labeling purposes and a new 27 CFR 7.54(a)(8) for advertising purposes. These proposed provisions would add to the malt beverage regulations language similar to that found in the FAA Act wine regulations regarding distilled spirits statements. The proposed language would prohibit labeling and advertising statements that imply that malt beverages are similar to distilled spirits or that malt beverage products are made with, or contain, distilled spirits. The two new provisions in question would allow the use of a brand name of a distilled spirits product as the brand name of a malt beverage. However, the proposed provisions would have the effect of prohibiting the use of a distilled spirits brand name in any other malt beverage labeling or advertising context. The use of a cocktail name as a brand name or fanciful name would be permitted if the malt beverage's overall formulation, label, or advertisement did not present a misleading impression about the identity of the product. G. Filing Formulas for Fermented Beverages Notice No. 4 noted that the TTB regulations at 27 CFR 25.62 and 25.67 require brewers to file a statement of process with TTB's National Revenue Center in Cincinnati, Ohio, as part of the Brewer's Notice for any fermented beverage that the brewer intends to market under a name other than “beer,” “lager,” “ale,” “porter,” “stout,” or “malt liquor.” Under 27 CFR 25.76, a brewer must file an amended Brewer's Notice if there are changes to an approved statement of process. When a brewer files a statement of process with the National Revenue Center, a specialist at TTB's Advertising, Labeling and Formulation Division in Washington, DC, examines the proposed statement of process to ensure that authorized materials will be used, to determine the correct class and type, and to ensure that the fermented product may be made at a brewery. Notice No. 4 proposed significant changes to the filing requirements described above. These changes included the removal of §§ 25.62(a)(7), 25.67 and 25.76 and the addition of new §§ 25.55 through 25.58 (27 CFR 25.55 through 25.58). These changes would: • Replace the statement of process requirements found at §§ 25.62(a)(7) and 25.67 with a formula requirement; • Describe more clearly the fermented products for which a formula is necessary; • Require brewers to provide specific information about ingredients, processes, and alcohol content in formulas; • Allow brewers to file formulas directly with the Advertising, Labeling and Formulation Division in Washington, DC; • Permit brewers to produce certain fermented beverages solely for research and product development purposes without having to receive formula approval; • Allow brewers to file formulas to cover production at multiple breweries; and • Allow brewers to file superseding formulas. Proposed § 25.55 would require the filing of a formula with TTB for specified products made at a brewery, including saké, flavored saké, and sparkling saké. A formula also would be required for products to which any coloring or natural or artificial flavors are added, or for any product to which fruits, herbs, spices or honey are added. This new section also would require the filing of a formula for any fermented product that undergoes special processing or filtration, or undergoes any other process not used in traditional brewing. The proposed § 25.55 text included examples of processes that would require the filing of a formula, including reverse osmosis, ion exchange treatments, filtration that changes the character of beer or removes material from beer, concentration or reconstitution of beer, and freezing or superchilling of beer. However, the proposed Notice No. 4 text would not require filing a formula for traditional brewing processes such as pasteurization, filtration prior to bottling, filtration in lieu of pasteurization, centrifuging (for clarification), lagering, carbonation and the like. Notice No. 4 also proposed more specific requirements for the information required in formulas, especially in the realm of flavoring materials and special processes. Proposed § 25.57 spelled out in more detail the information required in formulas, and included requirements found in ATF Rulings 94-3 (which concerned the production of ice beer), 96-1, and 2002-2. In keeping with the current practice of listing ranges of ingredients in statements of process, proposed § 25.57(a)(1) would permit brewers to indicate a “reasonable range” of ingredients used in formulas. However, in order to establish a useful limit, Notice No. 4 requested comments on how to define a “reasonable range” for the quantity of ingredients used in making fermented products. Also in keeping with current policy that permits using special processes in making fermented products, the proposed § 25.57 text specifically permitted such special processes, but required brewers to describe them in detail in their formulas. As noted in Notice No. 4, § 25.67 requires brewers to file a statement of process prior to producing any fermented product at the brewery that is not to be marketed under a traditional designation. This regulation does not provide any exception permitting research or development of fermented products without a statement of process. With the removal of § 25.67, a brewer could produce certain fermented beverages for research and development purposes under proposed § 25.55(c)(2) without receiving formula approval; however, a brewer could not sell or market such products until receiving formula approval. Proposed § 25.55(e) stated that previously approved statements of process would remain valid after adoption of the new regulation, provided that the finished product is in compliance with any new requirements relating to the definition of beer. The proposed formula regulations did not specify any Government form to be used for their filing. TTB also solicited comments on whether the proposed regulations on the preparation and filing of formulas would be easier and less confusing than the present statement of process requirement. H. Samples; Formulas and Samples for Imported Malt Beverages Notice No. 4 also included a proposed new section, § 25.53 (27 CFR 25.53), specifically authorizing a TTB officer at any time to require the submission of samples. This section recognized TTB's authority to require a brewer to submit a sample of a beer or a material used in producing a beer. For example, we occasionally examine samples of beer or ingredients in connection with our review of statements of process or formulas and in order to determine the proper tax classification of fermented products. Finally, Notice No. 4 also included a proposed amendment to § 7.31 (27 CFR 7.31) to reflect TTB's statutory authority to require an importer to submit a formula for a malt beverage, or a sample of a malt beverage or materials used in producing a malt beverage, in connection with the filing of a certificate of label approval on TTB Form 5100.31. This proposal recognized the fact that, occasionally, TTB has had to examine a statement of process or analyze samples of a malt beverage in order to determine the proper classification of a product, whether a particular product is a malt beverage, or whether a product is correctly labeled under the part 7 regulations. I. Other Issues Raised in Notice No. 4 In addition to the very specific proposals made by Notice No. 4, TTB requested comments and information on a number of general topics relating to the production and labeling of flavored malt beverages. TTB requested comments on the proposed 0.5% added alcohol standard for beer. Specifically, we solicited information regarding any studies, laboratory trials, or other empirical data that may have existed for added alcohol in flavored malt beverages. We also sought comments on how adoption of the proposed standard would affect the taste, shelf life, stability, or other characteristics of flavored malt beverages. In addition, we sought comments on whether production practices are available to produce flavored malt beverages with the desired product profile that would comply with the proposed standard. We also solicited comments relating to the effect of the proposed regulation on the viability of products currently on the market. Notice No. 4 further stated that we were particularly interested in comments addressing whether products on the market could be made under the proposed 0.5% added alcohol standard. Finally, as previously noted, TTB requested comments on whether another standard, such as a standard requiring that a minimum of 51% of the alcohol in a malt beverage be derived from fermentation at the brewery (in other words, setting a maximum limit of 49% for the alcohol content derived from added flavors or other materials), would be more appropriate than the proposed 0.5% added alcohol standard. We asked for supporting data, facts, or studies to back up any suggestions or comments for different added alcohol standards. Since we recognized that any new standard would constitute a substantial change from existing regulations and policy, we also sought comments on the amount of time needed to comply with any new rule limiting the amount of alcohol that may be added to products taxed as beer. Notice No. 4 encouraged comments on the amount of time necessary to develop and implement new formulas for these products and the possible costs involved. IV. Rulemaking History Notice No. 4 provided for the submission of comments through June 23, 2003. At the request of the E. & J. Gallo Winery, on June 2, 2003, we published Notice No. 10 (68 FR 32698) to extend the period for the submission of comments for an additional 120 days, until October 21, 2003. In Notice No. 4 we stated our intention to place all comments on the TTB Web site on the Internet. We stated that the names of commenters would be included in the posting of comments on our Web site, but that street addresses, telephone numbers, or e-mail addresses would be deleted on these postings. We did state that this information would appear on copies of comments available in the TTB reference library in Washington, DC. Due to the large number of comments, we were unable to redact street address, telephone number, or e-mail address information from the comments we posted on our Web site. Redacting this information from the large number of comments received would have prevented us from posting comments on the Web site in a timely manner. Therefore, we issued TTB Notice No. 23 on December 2, 2003 (68 FR 67388). This notice advised the public of our inability to redact the information from comments posted on the Web site and provided an opportunity for commenters to request that we redact this information from their individual comments if we received their request to do so by December 23, 2003. V. Comments Received in Response to Notice No. 4 A. General Discussion of Comments Before the close of the comment period, TTB received over 15,000 comments in response to Notice No. 4. Of these, over 14,000 consisted of variations on several form letters, which were submitted by mail, facsimile transmission, or e-mail. In addition, we received over 1,000 comments after the close of the comment period. Due to the large volume of comments received in response to Notice No. 4, and because of the need to provide expeditious guidance to State regulatory agencies, the industry, and consumers on this issue, we determined that it was not practical to consider the late-filed comments. Most of the comments focused on the proposed 0.5% standard or the 51/49 standard for beer and malt beverages. In particular, the “form letter” comments, which made up the vast majority of the comments, generally commented for or against the proposed rule, and either explicitly or implicitly commented on the standard for added alcohol. The hundreds of comments received from State legislators also focused primarily on this issue. While Notice No. 4 solicited comments on whether there was a different standard that would be appropriate, only a few comments addressed this question. Furthermore, only a small percentage of the total comments focused on issues such as alcohol content statements or formula requirements. Accordingly, the following breakdown of comments focuses on the commenters' position on the proposed 0.5% standard. B. Overview of Comments In the following comment discussion, the abbreviations “FMB” and FMBs” are used in place of “flavored malt beverage(s).” 1. Form Letters Of the over 14,000 form letter submissions referred to above, over 8,000 supported adoption of the proposed 0.5 percent standard and over 5,000 opposed adoption of that standard. The submissions in support of the proposed rule (or specifically in support of the 0.5 percent standard) break down as follows: • Over 5,000 e-mail comments came from individuals who identified themselves as employees of one major U.S. brewer and its subsidiaries. These commenters stated that the proposed standard is the best way to maintain clear distinctions between beer and liquor (distilled spirits) and to preserve the flavored malt beverage category. • Over 2,000 comments were received from beer distributors across the United States. Many of these commenters stated that the proposed rule is consistent with the historical interpretation of what constitutes beer and other malt beverages. They suggested that beer is a unique product that has been regulated and taxed differently from other alcohol beverages throughout our Nation's history. The commenters advocated adopting the proposed 0.5% standard in order to ensure the integrity of beer and the brewing process. They also stated that the proposed rule would help maintain an orderly marketplace and avoid costly and confusing disruptions in State licensing, taxation, and distribution policies, any of which would deal a blow to beer wholesalers. • Approximately 900 comments were received from individuals who identified themselves as employees of another major brewer. These comments supported the proposed rule as a clarification that will ensure that if FMBs were sold as malt beverages, they would be made according to traditional brewing methods and practices. The commenters suggested that without the proposed rule, retailers and wholesalers would face a patchwork of individual State laws and regulations. • Over 170 submissions came from beer consumers located primarily in two States. Many of these commenters stated that the proposed rule would provide a clear understanding to legislators, State and Federal regulators, and beer consumers as to what beer is and what beer is not. • More than 50 employees of a domestic subsidiary of a foreign brewer expressed their support for the proposed rule. They suggested that the proposed rule would maintain an orderly marketplace, meet consumer expectations for consistent products, and help sustain the long-term development of the product category. These commenters suggested that the reformulated products would be consistent with State tax, license, and distribution laws, allowing wholesalers and retailers to continue their operations. Furthermore, they stated that without a standard, individual States would adopt their own regulations and create a patchwork of different standards. The submissions in opposition to the 0.5 percent standard break down as follows: • Over 4,000 e-mail submissions came from consumers of FMBs. These comments opposed the proposed rule and suggested that there was no need to amend the regulations. Many of the commenters stated that they like FMBs just the way they are and that the proposed changes will be expensive and will result in increased costs to consumers. • Over 600 comments came from employees of a large producer of FMBs. These commenters opposed the proposed rule and suggested TTB instead adopt the “51% compromise.” The commenters suggested that compliance with the proposed standard would cost millions of dollars in new equipment purchases, reformulation of products, and development of new processes. They urged TTB to adopt regulations that promote fair competition and provide a level playing field, and they suggested the proposed rule would mark a dramatic change in how these products have been produced, marketed, and sold for 30 years. Finally, the commenters stated that the proposed rule could regulate FMBs out of the marketplace, depriving consumers of a drink they enjoy, costing millions in tax revenue, and resulting in the loss of thousands of jobs. • Over 400 small retailers located across the United States expressed their opposition to the “new regulations” and “rule changes.” Many of these retailers asked TTB to reach a “compromise” that would allow FMBs to remain in existence. The commenters suggested that the regulatory changes would raise the price of FMBs, sabotage this category of products by making it impossible or costly to sell them, and adversely impact small businesses. • More than 40 comments were received from employees of FMB distributors. These commenters opposed the 0.5 percent standard and urged TTB to adopt a “more reasonable” majority standard instead. The commenters focused on the potential impact of the proposed rule on the future of FMB producers and the businesses that rely on the viability of these products. 2. Other Comments FMB Producers. We received comments from several major producers of FMBs. The Beer Institute submitted a comment in support of the proposed 0.5% standard, on behalf of Anheuser-Busch, Miller Brewing Company (“Miller”), and Coors Brewing Company (“Coors”). The Beer Institute stated that these three senior and sustaining members produce or import well over 75% of the beer and other malt beverages sold in the United States, including many successful FMB brands. In addition, these three brewers each submitted individual comments in support of the proposed 0.5% standard. These commenters argued that the proposed 0.5% standard is consistent with TTB's statutory authority and will preserve the integrity of the products known as beer or as malt beverages. More importantly, these commenters suggested that only a 0.5% standard would maintain an orderly marketplace and foreclose actions by individual States, which could adopt their own potentially differing and conflicting standards. Anheuser-Busch and Miller stated that they could take steps to reformulate their products within the 0.5% standard and, in fact, have produced FMBs that achieve the same taste and appearance as existing products. The Flavored Malt Beverage Coalition (FMBC) submitted a comment on behalf of its members: City Brewing Company; Diageo North America, Inc.; High Falls Brewing Company; Mark Anthony Brands, Inc.; Pernod Ricard USA; Todhunter International; and United States Beverage LLC. The FMBC stated that, together, its members marketed and/or produced approximately 56% of the FMBs sold in the United States in 2002. The FMBC also stated that its members, as companies that collectively spent hundreds of millions of dollars to develop products now threatened by a change in Federal policy, have a particular interest in the outcome of the rulemaking. The FMBC, and several of its individual members, questioned TTB's statutory authority to impose restrictions on the current practice but also stated that, as a matter of policy, they would support a final rule that adopts the 51/49 standard. Furthermore, these commenters raised a number of legal challenges to the basis for the proposed rule, and they argued that the proposed 0.5% standard was not supported by either the consumer protection rationale or the need to take action before the States do so. Several of these commenters stressed the economic impact of the proposed rule. Many FMB producers suggested that the proposed 0.5% standard would require reformulation of popular FMB products, with a potentially adverse impact on consumer acceptance of those products. The FMBC submitted an economic study indicating that adoption of the proposed rule would have an adverse impact on the FMB industry, amounting to over $600 million over the next 4 years. Comments from a few small brewers that produce and bottle FMB products indicated that their survival would be in jeopardy under the proposed rule. Brown-Forman Corporation (“Brown-Forman”), the producer of an FMB known as Jack Daniel's Country Cocktails, also commented in favor of the 51/49 standard. Finally, E. & J. Gallo Winery (Gallo), which produces 13 FMB products, submitted a comment in which it took no position on whether it preferred the 0.5% standard or the 51/49 standard. Other Comments from the Beer Industry. The National Beer Wholesalers Association (NBWA) and the Brewer's Association of America (BAA) both commented in favor of the proposed 0.5% standard. TTB also received many comments from craft brewers, beer wholesalers, employees of the major brewers, and others in the beer industry supporting the proposed rule. Many of these comments suggested that FMBs are not beer or malt beverages as consumers understand these terms and that the proposed rule would preserve the integrity of the malt beverage category. Some brewers suggested that competition from FMB producers is hurting the beer industry. Consumer/Taxpayer Groups. The Center for Science in the Public Interest (CSPI), the Pacific Institute for Research and Evaluation, and several other associations commented in favor of the proposed rule. CSPI stated that the use of popular, well-known distilled spirits brand names in the advertising and labeling of malt beverage products misleads consumers. CSPI also suggested that these “alcopops” are extremely popular with underage drinkers, and that since most “alcopop” products currently do not comply with the 0.5% standard, classifying and taxing them as distilled spirits products would help reduce youth access to such products by placing them in liquor stores in many States rather than in grocery and convenience stores. The National Consumers League (NCL) commented against the 0.5% standard, stating that it opposed the perpetuation of policies that differentiate malt-based alcohol beverages from distilled alcohol beverages, and suggesting that ethyl alcohol is the same, regardless of whether it is in beer, wine, or distilled spirits. NCL agreed, however, that requiring compliance with a “majority” standard will ensure that an FMB actually contains malt, and in a significant concentration. While NCL questioned whether source of alcohol is in any way material to consumer choice, it concluded that FMB compliance with the majority rule would ensure that consumers are not deceived as to product content. TTB also received comments opposing the proposed rule from taxpayer and citizen organizations. These commenters suggested that the proposed rule would limit consumer choice, decrease competition, and waste taxpayer dollars. The commenters stated that the Government should accommodate legitimate consumer, industry, and employment needs. They suggested that the majority standard would achieve these goals better than the proposed 0.5% standard. State Regulatory Agencies and Lawmakers. TTB received comments from 31 State regulatory or tax agencies and one county liquor commission. Most of these comments specifically supported the proposed rule. The remaining comments generally supported the concept of a uniform standard for FMBs, without specifically supporting the proposed 0.5% standard. Two States simply provided information about their State laws, without taking a position on the standard. We also received comments in support of the proposed rule from three Governors, one Lieutenant Governor, and over 200 State legislators. A smaller number of State legislators commented in favor of the 51/49 standard. Some comments that specifically favored the proposed rule suggested that, in many States, malt beverages containing distilled spirits would be classified as spirits rather than malt beverages. Several States indicated that if TTB does not take expeditious action on this issue, they would go ahead and issue their own standards. Other States, however, simply stressed the need for a uniform standard and urged TTB to take expeditious action to create a standard for FMBs. Members of Congress. We received comments in favor of the proposed rule from nine members of the United States House of Representatives. We received comments in favor of the 51/49 (or majority) standard from 28 members of the House of Representatives and eight United States Senators. Many of the members of Congress who commented in favor of the 51/49 standard expressed concern about the negative economic impact that the proposed rule would have on employers and jobs within their districts or States. Many of these comments noted that existing FMB products were formulated in reliance on the longstanding policies of our predecessor agency. Miscellaneous comments. We received a comment from the Flavor and Extract Manufacturers Association of the U.S. (FEMA), the national trade association of companies that create and manufacture flavors for use in a wide variety of products, including FMBs. FEMA urged TTB to reconsider the proposed 0.5% standard, stating that it would significantly restrict the amount of alcohol contributed to the finished product from flavors and thus make it technically impossible for flavor chemists to satisfy the consumer desire for the distinctive, fresh, fruity malt beverages currently being sold. We received a few comments suggesting revisions to the system of taxing alcohol beverages as a way to take care of the classification issue posed by FMBs. These comments could not be adopted without legislative amendments to the IRC. Since the rest of the comments focused primarily on the two standards that we aired in Notice No. 4, the 0.5% standard and the 51/49 standard, our discussion of the comments will focus on those two standards. A small number of commenters focused on the remaining issues raised for comment in Notice 4. While we received several comments from States and consumer groups in support of the proposed mandatory alcohol content labeling for FMBs, many comments from industry members suggested that FMBs were being unfairly singled out, and that any such requirement should apply to all malt beverages or to none. We also received a few comments in opposition to the proposed limitations on the use of distilled spirits terms in malt beverage labeling and advertising. Some of these commenters claimed that the proposed restrictions violated the First Amendment. Finally, we received a small number of comments from brewers and brewery trade associations regarding the proposed new formula filing requirements. These commenters generally favored the new requirements, but they expressed concerns regarding certain aspects of the proposal and requested that TTB clarify some of the proposed formula requirements. C. Summary of TTB Final Rule Decisions After carefully analyzing the comments, which are discussed in greater detail below, we are adopting the proposals set forth in Notice No. 4 with certain important modifications. The final rule adopts the less stringent “51/49 standard” (allowing up to 49% of the alcohol content to come from flavors and other nonbeverage ingredients) for beers and malt beverages. We are providing affected industry members one year to reformulate their FMB products or otherwise conform to the standards adopted in the final rule. In reaching these decisions, we note that Executive Order 12866 provides that, when an agency determines that a regulation is the best available method of achieving an objective, it shall design its regulation in the most cost-effective manner to achieve that objective. The comments on Notice No. 4 have persuaded us that implementation of the proposed 0.5% standard might impose economic burdens on a sector of the FMB industry and have adverse effects on the viability of small brewers who produce FMBs, as well as their ability to compete within the malt beverage industry. We believe that adoption of the alternative “51/49 standard” for beers and malt beverages would achieve the important regulatory goals of protecting the revenue, ensuring that consumers have adequate information about the identity of FMB products, and establishing a Federal standard for such products, while at the same time reducing the compliance costs to the FMB industry. It is noteworthy that, with the exception of one producer that remained neutral on this issue, comments from the producers of FMBs all supported either the more restrictive 0.5% standard or the more liberal 51/49 standard. Thus, most of the FMB industry expressed support for creating some type of standard for FMBs that would set a limit on the alcohol derived from added flavors. The final rule also adopts the other proposals aired in Notice 4, with certain modifications in response to the comments. We are adopting the proposed mandatory alcohol content labeling requirements, as we have concluded that this requirement will provide consumers important information about these FMBs. Since we specifically stated in Notice No. 4 that we were not proposing mandatory alcohol content labeling for all malt beverage products, comments advocating such a position were considered to be outside the scope of the current rulemaking. We may consider such a proposal in the future. We are also adopting the labeling and advertising proposals, with modifications to respond to the First Amendment concerns raised by several commenters. As modified, the regulation will prohibit the use of labeling or advertising statements, designs, devices, or representations that tend to create a false or misleading impression that the malt beverage contains distilled spirits or is a distilled spirits product. These modifications clarify that we are only prohibiting labeling and advertising statements that are false or tend to mislead consumers. Finally, we have modified the language of the formula regulations in response to several comments about whether the proposed requirements were overly burdensome. For example, we are no longer requiring formulas to disclose the alcohol content of the product at each interim stage of production. We have also clarified the language of these provisions in response to several technical comments. VI. Comments on Whether the Rulemaking Is Necessary and Fair In this section, we discuss some of the general issues raised by commenters regarding the need for engaging in rulemaking and the fairness of the proposed change in agency policy. A. Is There a Need To Engage in Rulemaking on This Issue? The first issue presented is whether there is a need to engage in rulemaking at all. Many commenters suggested that TTB should not amend its regulations in any manner, but should instead allow the continued production of FMBs according to current policy. Other commenters supported the idea of rulemaking on FMBs. 1. Comments Opposed to Rulemaking As indicated above in the comment overview, TTB received over 4,000 e-mail comments that questioned the need for rulemaking on FMBs. These comments came from consumers who stated that they enjoyed drinking FMBs, and that they opposed the proposed regulation, which would mandate changes in the way those products were made. The commenters stated that they liked FMBs the way they are, that the changes would be expensive, and that consumers will end up paying more under the proposed rule. Many of these commenters suggested that the Federal Government should not waste tax dollars on “trivial” issues such as how FMBs are made, and that companies should make changes that consumers want, not what the Government demands. Finally, many of these comments suggested that the Government should focus on bigger issues, such as job creation, improving the economy, and fighting terrorism. These comments did not directly address the 51/49 standard. A few comments were also received from organizations representing taxpayer and citizen groups, including Americans for Tax Reform, the National Taxpayers Union, and Citizens Against Government Waste. One of these commenters stated that the proposed rule would limit consumer choice, decrease competition, and waste taxpayer dollars. This commenter suggested that the Government should accommodate legitimate consumer, industry, and employment needs before engaging in rulemaking. Another commenter expressed concerns that the 0.5% standard would force either a significant tax increase and/or a change in the production process for FMBs. It should be noted that while these comments generally criticized the proposed rule, they expressed a preference for either the 51/49 standard or some compromise over the 0.5% standard. 2. Comments Supporting Rulemaking TTB also received approximately 11,000 comments urging that TTB set a limit on the quantity of alcohol derived from added flavors in malt beverages. While these comments were divided over whether the limit should be set at the 51/49 standard or the proposed 0.5% standard, these commenters believed that it was important that TTB set a standard and clarify the classification of these products as malt beverages or distilled spirits. It should be noted that we received comments in support of setting a standard from the beer industry, producers of flavored malt beverages, consumers, members of Congress and other elected officials, and State regulatory agencies. These commenters supported the setting of a uniform Federal standard for a variety of reasons. Some commenters expressed concern that current labels mislead consumers. Many consumers and brewers suggested that the Federal government has the responsibility to maintain a distinction between traditional beer products and distilled spirits, and that the line between these two well-established categories should not be blurred by allowing the production of malt beverages that derive most of their alcohol content from the distilled spirits components of added flavors. Many commenters expressed concern that, in the absence of a Federal standard, the States would each set their own standards, leaving members of the beer industry facing a confusing patchwork of regulatory standards. Finally, of the FMB producers who commented on this issue, almost all supported action to set a standard to limit the quantity of alcohol derived from added flavors. While one major FMB producer expressed neutrality on the issue, the rest favored either the proposed 0.5% standard or the 51/49 standard. 3. TTB Response We acknowledge that FMBs are a popular category of alcohol beverage and that many consumers enjoy drinking these products. We recognize the concerns of many consumers that proposed regulatory changes may increase the cost of these beverages, and we have given serious consideration to cost issues in drafting this final rule. We have also given serious consideration to the issues of decreased competition and consumer choice. Nonetheless, after reviewing the thousands of comments received in response to this notice, we believe more strongly than ever that rulemaking on this issue is necessary. The overwhelming majority of the State regulatory agencies that commented on FMBs urged TTB to adopt a Federal standard for these products in order to avoid a patchwork of inconsistent State requirements. In addition, comments from the beer industry overwhelmingly favored the adoption of a Federal standard, including many commenters who pointed to the importance of maintaining a distinction between malt beverages, in which alcohol is derived from fermentation, and distilled spirits, in which alcohol is derived from distillation. Treasury and TTB believe it is important, in order to protect both the revenue and the consumer, to set a limit on the use in FMBs of alcohol not derived from fermentation at the brewery and prevent the unlimited use of alcohol derived from distilled spirits in FMB production. Thus, we do not adopt the views of those commenters who urged that TTB take no action on this matter. B. Fairness and Notice Issues 1. Comments Received Many commenters argued that it is unfair for TTB to change a policy upon which brewers and importers have relied for several decades. These commenters made the following arguments: • Since the 1950s, TTB and its predecessor agencies have required the review and approval of a statement of process (SOP) for any beer produced with flavors. By reviewing and approving SOPs for the various FMBs on the market today, TTB has accepted them as beer and malt beverages, and has endorsed the use of nonbeverage flavors up to the quantities indicated in the SOPs. • Our predecessor agencies have officially recognized the use of flavoring materials in the production of malt beverages since the Internal Revenue Service issued Revenue Procedure 71-26 over 30 years ago. • In 1980, ATF issued Industry Circular 80-3, which advised brewers that adjunct materials listed in the beer industry's Adjunct Report (later referred to as the Adjunct Reference Manual (ARM)), were suitable for use in beer and cereal beverages when used in accordance with the conditions described in the report. That Adjunct Report, as well as all subsequent editions of the ARM, lists ethyl alcohol as a permitted additive for use in flavoring beer, without any limitations. Several commenters stated that they have relied on these policies to create beverages that consumers enjoy and that they have invested millions of dollars promoting those brands. Some commenters argued that the industry had ample warning that TTB's predecessor agency was contemplating a limitation on the use of flavors containing alcohol in the production of beer and malt beverages. These commenters noted that in 1996 ATF notified the industry, through ATF Ruling 96-1, that rulemaking limiting the alcohol contribution from flavors in FMBs under 6% alc/vol was forthcoming. This ruling clearly stated that TTB would initiate future rulemaking to consider the prohibition, restriction, or limitation on alcohol derived from the distilled spirits components of added flavors, a statement that was reiterated in ATF Ruling 2002-2. However, commenters who opposed the proposed 0.5% standard suggested that ATF's actions after 1996 sent mixed signals to the industry. For example, a U.S. Senator stated that although the Bureau in 1996 suggested that rulemaking “in the near future” might limit the use of flavors in such products, it abandoned that rulemaking project and did not even mention it in the unified regulatory agenda that every Federal agency must publish on a semi-annual basis. Another U.S. Senator noted that although the 1996 ruling mentioned rulemaking, no such rulemaking proposal appeared until 2003. The Senator suggested that: In the intervening 7-year time period, manufacturers have relied on the existing law and the Bureau's formula approvals to invest hundreds of millions of dollars in the formulation and marketing of new products. These investments have created hundreds of jobs and a vibrant fast-growing U.S. market sector in which tens of millions of cases of FMBs have already been sold. Without a reasonable public health or safety rationale, it does not seem prudent or fair to revise these rules dramatically at this stage of the game. Accordingly, the Senator urged TTB to adopt the 51/49 standard, as it would “accomplish the same goals and have a lesser impact on these products and the industry that produces them.” Other members of Congress made similar comments. A letter signed by 26 members of the House of Representatives supported the “majority” standard, stating that over the past 5 years, “hundreds of millions of dollars have been invested in the development of the FMB category. These investments, and the thousands of jobs created, were all made on the reliance of long-standing federal policy and rules.” The letter suggested that Notice No. 4 intends to “change the established rules mid-stream on those who have successfully created the category. This is especially troubling in that it threatens to stifle the only growth sector in the brewing industry over the last several years.” Diageo stated that, in the summer of 2000, company officials met with ATF representatives and revealed Diageo's plans to enter the FMB market in the near future in reliance on existing policy. Diageo stated that company officials advised ATF that it would reconsider these plans if ATF planned to place new limits on the use of flavors in FMBs containing not more than 6% alc/vol. Diageo also stated that, after the meeting, ATF officials indicated that the agency did not plan to change existing policy towards FMB formulation. Diageo claims that, in reliance on those assurances, Diageo introduced Smirnoff Ice in December 2000. The FMBC also stated that a number of its members had received assurances from ATF, in the summer of 2000, that ATF planned no change in policy towards the addition of alcohol to FMBs containing 6% alcohol by volume or less. The FMBC stated that it sought these assurances after an ATF official sent a letter indicating that the Bureau was considering rulemaking, which might limit the alcohol from added flavors to no more than 25% of the total alcohol content of the product. A commenter pointed out that although ATF Ruling 96-1 stated that ATF would undertake rulemaking to limit alcohol from flavors in beer and malt beverages, ATF labeling and formula specialists never qualified approvals of statements of process or labels by stating that the approval was conditioned on future rulemaking. Instead, these commenters claimed that ATF continued to approve statements of process and labels without qualification. Another commenter stated that ATF personnel did not immediately implement the provisions in ATF Ruling 96-1 that require explicit ingredient listing and alcohol content information in statements of process, but instead delayed enforcement of these provisions until the issuance of ATF Ruling 2002-2 in 2002. 2. TTB Response TTB agrees with the commenters who note that for many years ATF and its predecessors allowed brewers to use alcohol-flavoring ingredients, without limitation, when producing malt beverages. Our predecessor agencies approved statements of process and certificates of label approval for these products and, before 1996, never suggested that there was any limit on the use of flavoring materials in FMBs. Accordingly, we acknowledge that the FMB industry relied on existing policies in formulating these products. It is important to note, however, that we know of no evidence that would suggest that producers of FMBs in the 1970s or 1980s were using nonbeverage flavors in their products at the high levels disclosed in the 2002 ATF study. To the best of our knowledge, the production of FMBs that derived the majority (and in some cases, up to 99%) of their alcohol content from added flavors is a trend that began in the 1990s. As the trend accelerated, ATF concluded that it was necessary to reevaluate the prior policy and consider the need for placing limits on the quantity of alcohol derived from added flavors. Furthermore, many State regulatory agencies began requesting that ATF create a Federal standard for the production of FMBs because of the confusion caused by the marketing and labeling of these products. Agencies may change policies, as long as the agency follows the appropriate procedures under the Administrative Procedure Act. The Supreme Court has recognized that “[r]egulatory agencies do not establish rules of conduct to last forever.” ( See American Trucking Assns., Inc. v. Atchison, T. & S. F. R. Co., 387 U.S. 397, 416 (1967).) The Court has also stated that agencies must be given ample latitude to “adapt their rules and policies to the demands of changing circumstances.” ( See Permian Basin Area Rate Cases, 390 U.S. 747, 784 (1968).) Furthermore, the Court has recognized that “[a]n agency's view of what is in the public interest may change, either with or without a change in circumstances. But an agency changing its course must supply a reasoned analysis * * *.” ( See Motor Vehicle Mfrs. Ass'n v. State Farm Mut. Auto. Ins. Co., 463 U.S. 29, 57 (1983), quoting Greater Boston Television Corp. v. FCC, 143 U. S. App. D. C. 383, 394, 444 F.2d 841, 852 (1970) (footnote omitted), cert. denied, 403 U.S. 923 (1971).) New manufacturing processes and marketing trends created a need for TTB and our predecessor agency to reevaluate longstanding policies on the use of flavors containing alcohol in the production of beer and malt beverages. As the above-cited cases demonstrate, an agency may make changes in policy, as long as the interpretation of the applicable statutes and the rest of the administrative record reflects reasoned deliberation. Finally, even if the agency in the two rulings referred to by the commenter had not given notice of its intention to engage in rulemaking on this issue, and even if the agency sent mixed signals on this issue prior to 2002, an agency is not precluded from engaging in rulemaking simply because it would change even a longstanding policy. By publishing a notice of proposed rulemaking and soliciting comments on this issue, we have clearly met the notice and comment requirements of the Administrative Procedure Act (APA). Notice No. 4 provided specific notice of the proposed changes to the industry and the public, and we provided the industry and the public almost 7 months to submit comments on those proposed changes. As reflected in this discussion of comments, we have carefully considered the comments from all interested parties, and we have given full consideration to options that would minimize any adverse economic impact flowing from the rule and that would afford industry members an adequate period of time to reformulate their products, if necessary. In crafting a standard on the use of flavors containing alcohol in the production of FMBs, we have also taken into consideration past and current agency policy. Accordingly, we have taken fairness and equity into consideration in drafting the final rule. VII. Regulatory Burden and Cost-Related Issues One of the most important issues raised in the comments is the difference in regulatory burdens and costs associated with the proposed 0.5% standard and the 51/49 standard. Opponents of the proposed 0.5% standard gave more weight to this issue than did supporters of that standard. However, many commenters who would be directly impacted by the proposed 0.5% standard urged TTB to adopt the 51/49 standard instead because it would be less costly and because it would not distort competition in the FMB market. The major issues raised by commenters on both sides of this question are summarized below. A. Costs of Complying With the Proposed 0.5% Standard 1. Comments in Support of the 0.5% Standard Many industry members who commented in support of the 0.5% standard downplayed the importance of economic issues. For example, the Beer Institute stated that the economic well being of certain sectors of the economy should not be a consideration in straightforward application of properly enacted Federal statutes. It also suggested that some of the comments were based on erroneous information that was provided to retailers, notably the false threat that FMBs will disappear from the marketplace if the proposed TTB standard is finally adopted. Instead, the Beer Institute suggested that these products would continue either as distilled spirits products or as reformulated FMBs. Some individual FMB producers also suggested that the economic issues were not significant. Anheuser-Busch acknowledged that, as with any new process, there may be associated transition costs, and it stated that even the 51/49 standard would require process changes and associated transition costs for most producers. Anheuser-Busch commented that it expected the total cost impact across the company's system to be minimal, ranging between a small investment in capital and a net cost savings due to process and material changes. In either case, the brewer did not anticipate that the slight change in cost would impact FMB prices for its wholesalers, retailers or consumers. Miller commented that there are costs that have been, and will be, incurred as a result of the proposed new standard; however, it accepted those costs as a part of doing business in a regulated industry. Neither brewer submitted an estimate of the costs they expected to incur; nor did they explain precisely how they would reformulate their products to minimize the cost of compliance. Some supporters of the 0.5 percent standard commented that the standard would not adversely affect wholesalers or retailers, and that in fact, the standard will bring clarity to the marketplace and preserve the FMB category for wholesalers and retailers. Without a clear standard, these commenters believe that the States would take action and may ultimately classify these products as distilled spirits. Such reclassification would negatively affect wholesalers and retailers because in certain States they would no longer be able to sell these products. 2. Comments Opposed to the 0.5% Standard Opponents of the proposed 0.5% standard submitted a great deal of data about the estimated economic impact of the proposed rule. The FMBC submitted an economic study indicating that adoption of the proposed rule would have an adverse impact on the FMB industry amounting to over $600 million over the next 4 years. Other commenters argued that the proposed 0.5% standard would have negative cost implications for the industry, the public, and the Federal Government, as set forth below. Consumer Prices. Many commenters expressed concerns that the cost of FMB products would rise if the proposed rule were adopted. As previously noted, several thousand consumers commented against the proposed rule on various grounds, including the concern expressed by many that the 0.5% standard would result in higher prices for consumers. Disruption to Existing Businesses. The FMBC commented that the proposed 0.5% standard would profoundly threaten the FMB business of its members. It stated that these companies had relied on longstanding Federal policies to create beverages that consumers enjoy and had invested millions of dollars in promoting these brands. The FMBC suggested that any change would disrupt and possibly damage the business of its members; however, they were willing to adjust to a majority standard. The FMBC argued that the proposed 0.5% standard presented a much more dire threat to the business investment of its members, without a sound policy justification behind it. Research and Development Costs. Many commenters suggested that compliance with a new standard would force brewers to incur extensive upfront manufacturing costs for research and development to create new formulations for existing products. According to these commenters, the 0.5 percent standard would require most manufacturers to reformulate their existing products. They stated that reformulation would be quite costly in that it would require large amounts of capital to purchase new equipment, investment in expensive technologies and treatment processes, and to advertise the newly reformulated products. Loss of Sales Due To Reformulation. Several FMB producers commented that even if they can reformulate their products to comply with the 0.5 percent standard, they believe they may not be able to achieve the same taste profile as their existing products. They indicate that this would cause them to lose customers, thereby reducing their sales and revenue. ECS Study. The FMBC contracted with Economic Consulting Services, LLC (ECS) to conduct an economic assessment of the impact that both the 0.5 percent standard and the majority standard would have on the domestic industry. The ECS assessment relied on information available to the public as well as information it obtained by surveying the FMBC's members. Sales by the members of the FMBC comprise approximately 56 percent of the FMB market. The ECS found that, for various reasons, the FMBC's members unanimously responded that they would choose to reformulate their products to comply with either standard rather than sell them as distilled spirits specialty products. They expected substantial costs associated with reformulating current products to comply with either standard. ECS estimated losses based on expected loss in volume, expected upfront capital costs, expected upfront research and development and test marketing costs, expected losses in operating income, and expected capital losses. ECS then extrapolated the data they obtained from FMBC members to the entire FMB industry based on market share data. Specifically, the ECS estimated the cost to comply over the next four years to be: Costs To Comply (in Millions) Over 4 Years Costs to Majority standard 0.5% Standard FMBC Members 186.2 340.5 Entire FMB Industry 332.5 608.1 Federal Taxes Foregone 139.1 291.8 ECS indicated that the 0.5 percent standard imposes significantly higher costs because it “would drive several of the products off retailer shelves completely, denying the producers, distributors and retailers a source of business and profits and denying customers a product they have come to enjoy.” Indirect Costs. Several commenters focused on the indirect costs associated with the proposed rule. For example, some commenters suggested that Federal Government's revenue collections would suffer because the 0.5% standard would cause sales of FMB products to decline. Several FMB wholesale distributors and other commenters expressed concern that the 0.5 percent standard would cause existing FMBs to be reclassified as distilled spirits, with the result that wholesale distributors would no longer be permitted to distribute them in certain States. These commenters also noted that this reclassification would affect retailers because, in many States, only State stores can sell distilled spirits. Effect on Small Businesses. Many commenters suggested that the proposed 0.5% standard would have adverse effects on small businesses. Some of these commenters suggested that the costs of complying with any new standard would hurt small companies the most since larger companies possess economy of scale advantages. TTB received a few comments from companies that identified themselves as small brewers that would be adversely impacted by the proposed rule. It should be noted that, pursuant to the regulations issued by the Small Business Administration, a small brewer is one that has no more than 500 employees. ( See 13 CFR 121.201). These commenters urged TTB to adopt the 51/49 standard. They suggested that the proposed rule would have a disproportionately large impact on small businesses because they are less able to adapt to the new technology necessary to comply with the proposed 0.5% standard. Mark Anthony Brands (MAB), a member of the FMBC, is the national distributor and marketer of several popular FMB products. MAB and its production affiliate, Mark Anthony Brewing, Inc., contract with four U.S. co-packing facilities to produce its FMB products. [In this document, references to “co-packing” cover situations where one brewer produces and bottles for another brewer pursuant to a contract or where a brewer uses another brewer's premises under an alternating proprietor arrangement.] MAB suggested that TTB should abandon the 0.5% proposal in favor of the majority standard because the latter did not threaten the competitive viability of small companies like MAB and its co-packers. MAB suggested that the 0.5% standard would threaten the viability of the few regional breweries that currently co-pack FMB products for MAB and others. City Brewing Company stated that it owns and operates a 5-million barrel capacity brewery in La Crosse, Wisconsin, which employs 350 people. The brewery was closed in 1999, but resumed operations in 2000 capitalized with funds contributed by employees and local investors. It adopted a contract-brewing business strategy because the beer brands formerly produced by the brewery were purchased and are now controlled by a major brewery. City Brewing Company stated that the consolidation of U.S. breweries had virtually eliminated all excess brewing capacity for beer marketers other than the largest U.S. brewers. The brewery stated that it has been profitable since resuming operation, but it expressed concerns that the proposed rule might result in a loss of business for FMB producers, which would have a significant negative impact on the brewery. A small brewery in North Carolina, Carolina Beer & Beverage Company, stated that adoption of the 0.5% standard would have a “profound adverse impact” on both this brewery and similar small brewers. The brewery urged adoption of the majority standard instead. Carolina Beer & Beverage stated that 70% of its revenues are derived from FMBs, and it noted that it had invested significant amounts of capital and resources in order to produce FMBs that comply with longstanding Federal policies. This brewery suggested that if TTB adopted the 0.5% standard, it was unlikely that it could to maintain its competitiveness in the FMB industry and that such a standard could even threaten the company's ability to stay in business. In addition, many distributors commented on the adverse impact of the 0.5% standard. For example, United States Beverage, a small distributor located in Connecticut, commented that it employs 85 people and that FMB products support over 70% of its revenues. This commenter stated that the proposed 0.5% standard would have “devastating” effects on the industry. United States Beverage also suggested that while reformulation might be only an inconvenience to the largest brewers, it would be an “operational impossibility” for a smaller brewer. B. Effect on Current Products and New Product Development In Notice No. 4, TTB sought comments relating to the effect of the proposed regulations on the viability of products currently on the market. We stated we were particularly interested in comments addressing whether products on the market could be made under the proposed standard. Additionally, we sought comments on how the adoption of the 0.5% added alcohol standard would affect taste, shelf life, stability, or other characteristics of these products. We also sought comments on whether production practices are available to produce FMBs with the desired product profile and still comply with the proposed standard. Finally, we sought comments as to whether another standard, such as the 51/49 standard, would be more appropriate for these products. 1. Comments Supporting the 0.5% Standard Anheuser-Busch commented that it is capable of producing FMBs under the 0.5% standard and is preparing to do so. The brewer stated that its brew masters have already developed reformulated products that will be indistinguishable from the current FMB products they produce and sell. Anheuser-Busch indicated that these reformulated products would have the same clarity, aroma, and taste profile of their current products. Anheuser-Busch further stated that reformulation could be done and that no FMB producer should lead TTB to believe otherwise. Miller also commented that its products could be produced under the proposed standard without compromising their taste or their high quality standards. Furthermore, the brewer indicated that it has successfully produced prototype products that comply with the 0.5% standard and has tested the acceptability of these products with expert tasters and others. These tests confirm that the reformulated product satisfies the taste profile of the original product. Miller further stated that shelf life and product stability are not expected to be barriers to complying with the new standards. Miller stated that: Shelf life will be reduced to that of a traditional beer, i.e., approximately four months which is a significant reduction from the six to 12 month shelf life currently applicable to Flavored Malt Beverages produced today. Because it will be consistent with traditional beers, however, we do not anticipate shelf life or product stability to be an insurmountable problem with the reformulated products. Other commenters stated that since certain brewers have already demonstrated their ability to produce FMBs in accordance with the 0.5% standard, they believe that these products will be available to wholesalers and retailers in all States with no interruption and no discernable taste differences. Coors commented that the 0.5% standard “is also fair because it does not prohibit any current product. Just because many of the current ‘flavored malt beverages’ may need to be reclassified as distilled spirits does not mean that the TTB proposed regulation will ‘kill the category,’ as some might claim.” Coors suggested that under the proposed rule, products containing 0.5% or more alcohol from the distilled spirits components of added flavors could continue to be produced, but would be regulated as distilled spirits products. 2. Comments Supporting the 51/49 Standard While the major brewers claimed that product reformulation under the 0.5% standard would not be a problem, as previously noted in this preamble, other FMB producers suggested that this would have a significant impact on their businesses, resulting in higher costs for research and development, new equipment, and marketing, and the possibility of reduced sales due to consumer rejection of reformulated products. Furthermore, several members of Congress expressed concerns about the costs of reformulation and the possible risks posed by such reformulations to the FMB industry. For example, one U.S. Senator stated: If the new formulation standards increase the costs of producing FMBs, and alter their taste such that consumers are reluctant to purchase them, the FMB market will decline. This decline in profitability will surely drive some FMB manufacturers out of the market, and reduce competition in the marketplace. This Senator urged adoption of the 51/49 standard. Another Senator suggested that the proposed standard “would likely change the taste and character of FMBs—products which have attained broad consumer loyalty. There is no doubt that this outcome would provide FMB's rivals with a distinct competitive advantage.” Numerous State lawmakers opposed to the 0.5% standard commented that if TTB establishes the 0.5% standard, it would force FMB brewers to make costly changes to their current production processes. They indicated that TTB's adoption of the 0.5% standard would force FMB brewers to increase the amount of malted barley and other traditional ingredients used in an FMB, probably resulting in very differently tasting products. As indicated earlier in this comment discussion, the Flavor and Extract Manufacturers Association of the United States (FEMA) urged TTB to reconsider the proposed 0.5% standard because it would significantly restrict the amount of alcohol contributed to the finished product from flavors, thus making it impossible for flavor chemists to satisfy the consumer desire for the distinctive FMBs currently sold. FEMA noted that flavors contain ethyl alcohol because it is a safe, economical, and effective extraction medium for fruits, nuts, and botanicals, as well as a diluent for polar and non-polar flavor chemicals. FEMA also stated that fruit essences and distillates, which are used extensively in the creation of natural fruit flavors, contain an appreciable amount (up to 20-25%) of naturally occurring ethyl alcohol. FEMA stated that, because of their composition, alcohol beverages require higher flavor loads to deliver pleasing characterizing flavors. It stated that while many non-alcoholic beverages use emulsions to deliver flavor systems, this is not possible in alcohol beverages because the destabilizing effect of the ethyl alcohol will produce precipitation and oil separation in the final beverage. According to FEMA, this means that the higher flavor level and the dependence on ethyl alcohol as the only reliable solvent makes it necessary to exceed the 0.5% limitation to manufacture acceptable and stable products. FEMA noted that the ATF study referenced in Notice No. 4 found that most FMBs formulated their products in accordance with ATF Ruling 96-1. FEMA stated this has resulted in the evolution of beverages that deliver to the consumer a clean, pleasant flavor and that have a reasonable shelf life. FEMA further stated that producers have used various treatments to reduce the inherent bitterness and off-flavor characteristics associated with fermented malt beverages. FEMA suggested that if TTB limits the contribution of alcohol from flavors to less than 0.5%, that restriction would negatively impact the taste of FMBs and limit the shelf life of these products. FEMA noted that malt-based beverages require a higher percentage of flavor addition than other alcohol beverages due to the more pronounced organoleptic properties of the malt base itself. Malt-based products have an aftertaste that is difficult to overcome. The aftertaste and malty off-characters tend to accentuate with increased exposure to heat. Limiting the amount of alcohol derived from flavor severely limits the opportunity to use vanilla, cocoa, coffee, and other botanical extracts that often require usage levels of 3% or higher in the finished products. In conclusion, FEMA stated that limiting the contribution of alcohol content by flavors to less than 0.5% would change the overall taste profile of these products, and the consumer will ultimately receive a different tasting, less acceptable beverage. The change in flavor will be caused by a combination of increased malt base percentages and off-flavor contributed by the malt. FEMA stated that limiting either the ingredients that may be used in flavors or the alcohol contributions from flavors would make it impossible for manufacturers to continue producing many of the malt beverages being sold today and would severely limit the flavor industry's opportunity for new product development. 3. Neutral Comment Finally, Gallo stated that it had conducted a study involving the aging of reformulated products under normal conditions to determine the impact of the proposed changes to the alcohol source standards on FMBs. Gallo studied two of its 13 FMB products, comparing their current formulation with both standards aired in Notice No. 4. Due to the limited time available, Gallo noted that it was only able to evaluate these products as they would age under normal shipping and storage conditions 3 1/2 months after production. After evaluating the results, Gallo determined that the study was inconclusive. According to Gallo, it appeared that the change in malt percentage impacted each product differently. Gallo concluded that “[t]he indication is that all of our products must be studied individually to understand the full impact of the proposed change. There was no time to explore this issue in time for these comments.” Gallo stated that, in light of the inconclusive results from the study, it took no position on the proposed definitions for beer and malt beverages. Gallo did indicate that it plans to continue to produce and market FMBs under either of the standards aired for comment in Notice No. 4. However, it pointed out that either new standard would require Gallo to invest in new equipment to produce additional volumes of malt base. Either standard would also force Gallo to develop new malt fermentation techniques and production techniques to provide a malt base that results in products with a flavor and taste profile that meets current consumer expectations. This, Gallo noted, might require development of new technology and different equipment. C. Effect on Competition 1. Comments in Support of the 0.5% Standard Many small craft brewers expressed support for the 0.5% standard based on their view that the arrival of FMBs in the marketplace has had a negative effect on sales of traditional malt beverage products. Some commenters suggested that TTB should adopt the 0.5% standard for added alcohol because this action would benefit small brewers who generally do not produce FMBs. Many small brewers and their employees expressed their concern that the arrival of FMBs during the past years has weakened the brewing industry. They explained that over the past 25 years there has been a major revitalization of the brewing industry, with smaller brewers and brewpubs now found in every State and metropolitan area and in many small towns. They indicated that the number of microbreweries closing since the arrival of the newer FMBs has exceeded the number of microbreweries opening—reversing the trend and weakening the industry. One small brewer stated that he expects to compete with other quality small brewers in the region, but would not like to see huge corporations with unlimited legal and marketing funds compete against him with products that are not real beer. Another small brewer commented that if he can make a wonderful tasting product with this standard, then the larger competitors could do it also. A third brewer indicated that the manner of FMB production explained in Notice No. 4 avoids many of the costs associated with the volume demands of beer production and storage. He indicated that he believes this results in an unfair competitive advantage over traditional and craft brewers. 2. Comments in Support of the 51/49 Standard Many opponents of the 0.5% standard suggested that adoption of the standard would have an anti-competitive effect. For example, the FMBC suggested that support for the 0.5% standard appeared to come from the many industry members who, for competitive reasons, would benefit from the complete demise of the FMB category or would derive a competitive advantage from a 0.5% rule. The FMBC stated that the 0.5% standard, if adopted, would give a competitive advantage to some FMB producers at the expense of others. In support of this claim, the FMBC pointed out that America's largest brewer claimed that it could already produce FMBs meeting the 0.5% standard without compromising product taste or availability. The FMBC stated that this illustrates that, if adopted, the standard would adversely affect competition by forcing competitors to acquire technologies and capabilities similar to those apparently possessed today by the largest brewers. The FMBC added that the marketplace, not the Government, should determine the industry's winners and losers. The FMBC urged TTB to avoid crafting a rule that hands a competitive advantage to some FMB producers at the expense of others. Mark Anthony Brands (MAB) stated that: [F]ederal policies favoring competition demand that TTB consider anticipated anti-competitive effects in choosing between policy alternatives and seek to adopt that alternative which promotes competitive outcomes. The 0.5% standard would favor larger companies, particularly America's (and the world's) largest brewers, and would therefore decrease competition in the FMB market segment. MAB accordingly urges TTB to reject the proposed 0.5% standard in favor of one that allows FMB producers to compete on a level playing field and supports future competition. MAB suggested that Federal policy strongly favors marketplace competition and discourages the unhealthy concentration of market power in the hands of a few dominant players. MAB also argued that ensuring competition in the alcohol beverage industry played an important role in motivating Congress to enact the FAA Act, and it cited a provision of the legislative history of the FAA Act, which indicated that its promoters wanted to “enable small units to get into the liquor industry.” MAB also noted that the burdens of regulation fall disproportionately on small companies, citing a provision of the legislative history of the Regulatory Flexibility Act which recognized that even if actual regulatory costs are equal between competing large and small firms, small firms have fewer units of output over which to spread such costs and are thus unable to take advantage of the economies of scale. As noted earlier in this comment discussion, MAB argued that TTB should abandon the 0.5% proposal in favor of the majority standard. MAB stated that the past two decades have seen the concentration of brewing capacity in the United States into a very small number of hands and that while America is home to over 1,400 breweries, the three largest brewers own the facilities responsible for producing over 90% of domestic beer and malt beverages. Noting that most other brewers are small “micro” and “regional specialty” operations that produce their own products, the commenter argued that these small brewers would not have the capacity to produce a successful new brand. MAB suggested that because of the costs of a new brewery, combined with the high failure rate of new products, production capacity presents a formidable barrier to entry to the U.S. beer market. Accordingly, MAB stated that the “few remaining ‘old regional' brewers today represent the only realistic way to quickly access significant production capacity in the U.S.” MAB argued that the demise of America's “second-tier” brewers over the past 10 years has taken vast amounts of brewing capacity off-line, and that a few old regional breweries, which currently co-pack FMB products for MAB and others, own the remaining excess U.S. brewing capacity. MAB concluded that a decline in FMB sales would “likely” cause these brewers to close their doors altogether and that this resulting loss of production capacity in the United States would add costs and drive jobs overseas. MAB also suggested that the 0.5% standard represented a “win-win” scenario for the largest brewers if they indeed possess the technology to produce FMBs under that standard that achieve the same taste profile as existing products. MAB stated that this technology would allow them to dominate the FMB category with their products. On the other hand, if consumers reject FMBs produced under the 0.5% standard, MAB stated that “the largest brewers will benefit because the elimination of the FMB category will protect their extensive investments in the production and distribution of traditional beer and malt beverage products.” Several members of Congress indicated that the 0.5% standard seems designed to distort the existing market by providing an artificial competitive advantage for companies that currently dominate the domestic beer industry but that have introduced under-performing and less popular FMB products. We also received a comment from the British Embassy suggesting that the proposed rule would place an unfair competitive disadvantage on companies based in the United Kingdom (U.K.), including the U.S. market leader, threatening jobs in the U.K. and the United States, as well as thousands of dollars in investment. D. Effect on the Retail Licensing System and Overall Marketplace 1. Comments in Support of the 0.5% Standard Many commenters stated that the 0.5% standard would ensure product integrity, preserve long standing distinctions imposed on beer, wine, and spirits, and provide a uniform and consistent classification system on which States, wholesalers, retailers, and consumers can rely. They stated that, if adopted, the standard would help to maintain an orderly marketplace, meet consumer expectations for consistent products, and help sustain the long-term development of the FMB category. According to several commenters, implementation of the 0.5% standard would avoid costly and confusing disruptions in State licensing, taxation, and distribution policies. Several retailers and wholesalers feared that any other standard could have significant consequences for the industry and for thousands of alcohol beverage licensees, most of which are small businesses. Without a clear standard, some commenters believed that the States would take action and may ultimately classify these products as distilled spirits. Such reclassification would negatively affect beer wholesalers and retailers because in certain States they would no longer be able to sell these products. 2. Comments in Support of the 51/49 Standard In opposition to the 0.5% standard, several FMB wholesalers expressed concern that the standard would cause TTB to reclassify existing FMBs as distilled spirits. Some commenters expressed a fear that if TTB reclassifies these products, certain States will no longer permit beer wholesalers to distribute them. Some commenters pointed out that this reclassification would also affect retailers because in many States only State-operated stores can sell distilled spirits. Many commenters, chiefly wholesalers and their employees, as well as employees of FMB producers, expressed the fear that they will lose their jobs if TTB approves the 0.5% standard. One industry association cautioned that approval of this standard would cost jobs in production facilities all across the country. Another commenter pointed out that thousands of businesses rely on sales of FMBs for revenue, from the product itself and from secondary sales. The commenter indicated that, if implemented, Notice No. 4 would threaten sales and put further pressure on small businesses already pushed to the brink. Diageo explained that its products have generated numerous jobs throughout the country. Diageo noted that it not only employs numerous production and sales employees, but also generates work for numerous suppliers in areas such as glassware and packaging materials. Diageo stated that two of its facilities are involved in the production of FMBs and contract production has occurred at five non-Diageo facilities during the past three years. A U.S. Senator commented that FMB bottling facilities provide jobs and millions in dollars to local economies through wages, taxes, services purchased, and other means. He stated that any regulation that threatens the market position of these products puts those jobs at risk. Other U.S. Senators commented that this proposal could have a profound and devastating impact on employees in their States and across the nation. Two U.S. Senators indicated that FMBs constitute a booming industry that has brought a direct benefit to their State, and they do not wish to see its growth and associated jobs curtailed in such an unnecessary fashion. A wholesaler expressed concern over some small brewers' claims that the 0.5% standard will not harm America's small brewers. This commenter asserted that these small brewers have never produced an FMB product and have no intention of competing in the FMB category in the future. Since these small brewers have no stake in the outcome of this proposed rulemaking, their claims should not be considered as authoritative. Other commenters pointed out that it is not the job of TTB to favor one industry over another. E. TTB Response 1. Regulatory Burdens and Costs Imposed by the Proposed Rule When we issued Notice No. 4, we certified that the proposed rule would not have a significant impact on a substantial number of entities. We stated our belief that 10 or fewer qualified small breweries manufacture FMBs subject to the rule. We asked any small brewery that believed it would be significantly affected by this rule to let us know and tell us how it would affect them. We also certified that the proposed rule was not a significant regulatory action, as defined by Executive Order 12866, because it would not have an annual effect of $100 million or more on the United States economy. After reviewing the comments, we have not changed our position on these matters. We do not believe that the proposed rule would have had a significant economic impact on small businesses, within the meaning of the Regulatory Flexibility Act. While we received many comments suggesting that there would be numerous indirect effects on wholesalers and retailers of FMBs, we received only a few comments from brewers that identified themselves as small businesses producing FMBs that would be adversely impacted by the proposed 0.5% standard. Nor do we believe that the proposed rule would have been a significant regulatory action within the meaning of Executive Order 12866, notwithstanding the suggestion to the contrary in the ECS Study. The primary data for the analysis in that study comes from FMBC members. Because much of the economic data submitted by FMBC members is proprietary and confidential, TTB cannot verify the accuracy of the figures. Furthermore, we are concerned that certain parameter assumptions and calculations in the ECS study are questionable and could lead to an overstatement of loss. For example, since the study separately included estimates of declines in Federal corporate tax revenue, it should have presented its estimates of declines in profits net of taxes. Under the 0.5% standard, ECS calculated that Federal corporate tax revenue would decline by $94 million in present value due to reduced profits for FMBC firms over the period 2004-2007. Accordingly, the expected after-tax decline in profits for FMBC firms would be $247 million rather than the $341 million decline in profits listed in the study. The study's use of discount rates of 20 and 30 percent to account for the increased uncertainty of future income appears to assume a large risk-premium. The treatment of capital expenditures is unclear, and the measurement of capital stock and capital losses is questionable. Furthermore, there is a methodological flaw in deriving private and public loss totals because the ECS study looked at FMB operations in isolation, without accounting for the potential for increased sales of other types of alcohol beverages. For example, we do not agree that either the proposed 0.5% standard or the 51/49 standard would result in significant losses of Federal tax revenues as a result of lowered sales of FMBs. Even if the reformulation of popular FMB products results in lowered sales for these products, it does not necessarily follow that the Federal Government would lose tax revenues as a result. Because of changes in consumer preference and other factors, the relative market share of specific products often fluctuates. However, it is logical to assume that most of the FMB consumers who might abandon their favorite products as a result of changes in taste profile would substitute other alcohol beverages for them. Thus, it is unlikely that any changes in the relative market share of FMB products would result in a significant net loss of the Federal excise taxes collected on alcohol beverages. Furthermore, because many FMB producers also manufacture other types of alcohol beverages, losses in sales of FMB products may be offset by increased sales of other types of alcohol beverages. Finally, we do not believe that the economic impact on FMBC members can necessarily be extrapolated to the rest of the FMB industry based simply on market share. In fact, the FMBC, as well as other commenters opposed to the proposed 0.5% standard, have argued in this rulemaking proceeding that the 0.5% standard would benefit America's largest brewers at the expense of their competitors. The comments show that the expected costs of compliance vary from producer to producer. For example, as previously noted, Anheuser-Busch commented that it expected the total cost impact to be minimal and did not anticipate the “slight change in cost” to impact FMB prices for wholesalers, retailers, or consumers. Opponents of the 0.5% standard cannot argue with any consistency that the standard would unfairly benefit their competitors, while still maintaining that those competitors would suffer the same costs and losses as they would. Nonetheless, after carefully considering all of the comments on this issue, TTB is persuaded that implementation of the proposed 0.5% standard might impose economic burdens on a sector of the FMB industry and adversely affect the viability of some small brewers who produce FMBs, as well as their ability to compete within the beer industry. The comments indicated that while some brewers would be able to reformulate without incurring significant costs, many producers of FMBs believe that reformulation of their products to comply with a 0.5% standard would result in significant costs. The FMB producers that commented on this issue indicated that they would reformulate their products as FMBs rather than produce them as distilled spirits products. Accordingly, the costs associated with the 0.5% standard are not connected with the higher Federal excise tax imposed on distilled spirits products. Instead, these costs are brought about by the need to conduct research and development, and to invest in new equipment and technology necessary to produce FMBs that meet the 0.5% standard. Many FMB producers indicated that the costs of complying with a 51/49 standard would be significantly lower. Those FMB producers that commented in favor of the 0.5% standard did not specifically address the relative costs of the two standards, although one brewer noted that either standard would impose some costs. In addition to the costs associated with producing new FMBs that met the new standards, many FMB producers expressed concerns that they would not be able to achieve the same taste profile under the proposed 0.5% standard, and that the 51/49 standard would afford them more flexibility in meeting the expectations of consumers in this area. These producers are concerned that if they attempt to reformulate their products in accordance with the 0.5% standard, consumers will not accept the reformulated products and product sales will go down, possibly resulting in the disappearance of some current FMB products from the marketplace. A comment from FEMA supported this concern, noting that the 0.5% standard would make it impossible for manufacturers to continue producing many of the malt beverages being sold today and would severely limit the flavor industry's opportunity for new product development. We also find persuasive the comment from Gallo, which did not take a position on the 0.5% or 51/49 standard, but which noted the difficulty of predicting the impact of either standard on the taste profile and shelf life of FMB products. Although the number of small brewers affected by this rule is not large, we note that several commenters indicated that there are fewer regional brewers with excess production capacity in the United States today than in the past. Many commenters indicated that the proposed 0.5% standard could have a significant impact on those regional brewers that co-pack FMBs for other companies. In particular, we are concerned that the economic impact of the proposed rule may be disproportionately borne by those small brewers who lack the economies of scale possessed by their larger competitors, and who would be less able to absorb the costs associated with reformulation of products in accordance with the more stringent 0.5% standard. As a related matter, TTB is concerned that the proposed 0.5% rule might affect the ability of some small brewers to compete within the brewing industry. It should be noted that we do not agree with those comments that suggested that one of the purposes of the proposed rule was to protect either large or small brewers from competition with producers of FMBs. It is not TTB's intention in this rulemaking action to favor any one segment of the FMB or beer industry over another, to remove competition in the marketplace, or to destroy a particular category of malt beverages simply because it is preferred by many consumers over more traditional brewery products. Our statutory mission under the FAA Act is to promote fair competition within the malt beverage industry, not to favor one segment of the industry over another. Accordingly, the purpose of the final rule is to treat all segments of the beer and FMB industries in a fair and even fashion. 2. Options To Reduce Regulatory Burdens and Costs Even if a rule is not a significant regulatory action, Executive Order 12866 requires us to design the regulation in the most cost-effective manner to achieve the regulatory objective. We have considered several options to reduce the regulatory burdens and economic costs imposed by the proposed rule. One of those options is to exempt small businesses from the requirements of the rule. However, this option is not viable for several reasons. First, one of the primary purposes of the rule is to enhance consumer protection; this purpose would be defeated by an exemption for small businesses. Furthermore, some small brewers who produce FMBs do so under contract with larger companies, and allowing an exemption for these companies would raise significant fairness issues. Finally, and most important, since the IRC does not authorize such a difference in tax treatment for small producers of FMBs, we do not believe we have statutory authority to implement such an exemption by regulation. A second option we considered was the delay of the effective date of the final rule in order to provide adequate time for the industry to make the necessary changes to product formulation. As discussed in more detail later in this document, we have delayed the implementation of the final rule for one year. We believe this one-year delayed effective date will provide ample time for the FMB industry to conform to the requirements of the final rule. The final option we considered was adoption of the 51/49 standard instead of the 0.5% standard. Based on the information in the rulemaking record, we have concluded that compliance with the 51/49 standard will be significantly less burdensome and costly than compliance with the 0.5% standard. Furthermore, based on the comments, it appears that adoption of the 51/49 standard would not adversely affect the ability of small brewers to compete in the FMB marketplace and would reduce the impact of the changes needed to reformulate existing products to comply with the final rule. As we considered the comments and weighed the relative merits of the 0.5% standard and the 51/49 standard, we also considered the issues of costs and other regulatory burdens. As shown in the remainder of this document, we have tried to address these issues at each step, so that our final rule will achieve the goals of this rulemaking process—protecting the revenue, ensuring that FMB labels provide the consumer with adequate information about the identity of the product and do not mislead consumers, and setting a Federal standard for the use of added alcohol flavors in malt beverage products—while minimizing unnecessary costs and other regulatory burdens on the affected industry. For these and other reasons set forth later in this document, we have concluded that we should adopt the 51/49 standard for beers under the IRC and for malt beverages under the FAA Act. TTB believes that by allowing FMBs to comply with the less stringent 51/49 standard rather than the proposed 0.5% standard, we meet the goals of this rulemaking proceeding and, at the same time, lessen the potential economic costs and other regulatory burdens imposed on members of the FMB industry. The other reasons for adopting the 51/49 standard are set forth elsewhere in this preamble. VIII. The 0.5% Standard vs. the 51/49 Standard—Other Issues A. Comments in Favor of the 0.5% Standard 1. Consistency With the IRC and the FAA Act Many commenters found support for the proposed 0.5% standard in the IRC provisions establishing 0.5% as a dividing point between products subject to tax under the IRC and those that are not subject to tax. For example, the Beer Institute noted that the IRC “clearly provides the Secretary with broad authority to issue and enforce regulations, to classify products for tax purposes, and to establish a workable administrative system to collect taxes.” The Beer Institute stated that classifying intoxicating liquors based on the 0.5% cutoff has a long history, dating back to 1902 and continuing through Prohibition. Miller commented that the “use of what could be characterized as a de minimis threshold such as 0.5% is a common sense approach to the regulation of alcohol beverages considering that small amounts of alcohol are present in many other beverage products such as juice, soft drinks, soda, and non-alcoholic beers made by brewers.” Several commenters noted that the IRC and FAA Act definitions of “beer” and “malt beverage,” respectively, contemplate that the alcohol content in those products must be derived from fermentation, not from added distilled spirits. Coors argued that while some may argue that there is a difference between combining distilled spirits “directly” with a malt base and doing so “indirectly” through the addition of flavors, it believed that “this is a distinction without a difference. Congress clearly intended to classify any alcoholic beverage that contains a mixture or dilution of distilled spirits as ‘distilled spirits.’ ” Several brewers commented that neither law nor good policy supported the 51/49 standard. Coors suggested that while the proposed 0.5% standard allowed the addition of a de minimis amount of flavors, a 51/49 rule went beyond the allowance of a de minimis quantity of flavors. Anheuser-Busch stated that neither the FAA Act nor the IRC provided a basis for TTB to adopt the 51/49 standard, arguing that “[t]he difference of only a couple of drops between a product that is ‘mostly’ a beer versus ‘mostly’ a distilled spirit would make a mockery of the law, public policy and the many years of distinction between malt beverages and distilled spirits.” 2. Consumer Deception or Confusion Many commenters supported the proposed 0.5% standard based on the premise that it would reduce consumer confusion. These commenters included consumers, State senators and representatives, beer distributors, merchandisers, Members of Congress, State governors, State ABC commissions, breweries, national associations, State licensing and taxing authorities, State coalitions, and industry members. As indicated in the comment overview, several thousand commenters stated that the establishment of a 0.5 percent standard would eliminate consumer confusion, preserve the integrity of the beer category, or provide beer consumers with a clear understanding of the product. Many commenters suggested that it was important to define the difference between beer and other alcohol beverages, such as distilled spirits. For example, we received thousands of comments suggesting that the proposed 0.5% standard was the best way to maintain “clear distinctions between beer and liquor.” Many commenters agreed that TTB has a responsibility to protect consumers through accurate labeling, to ensure that products labeled as “flavored malt beverages” are truly products that have alcohol obtained by the fermentation of malt. Others believed the proposed rule would promote consistency in consumer expectations, clarify Federal public policy, and end any confusion that may linger from the past or that may arise from alternative proposals. Several commenters suggested that, in the absence of a national standard, States would enact differing standards under which the same product may be sold as a “beer” in one State and as a “distilled spirits” product in another State. The commenters suggested that these inconsistent standards would c [Text truncated at 120,000 characters. The full text is on the page linked above.] --- Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3A04-28460. Public record. Not legal advice.