# Cap Export, LLC v. Zinus, Inc.

> District Court, C.D. California · June 2, 2021

URL: https://www.frixlaw.com/law-library/cases/10041000

## Case

- **Court:** District Court, C.D. California
- **Decided:** June 2, 2021
- **Opinion:** 100trialcourt
- **Cited by:** 0 later opinions in the Frix Law Library

## Citator (automated)

- No negative treatment found by the automated citator. That is not the same as a confirmation that the case is good law; read the citing cases.
- Full citator and citing cases: https://www.frixlaw.com/law-library/cases/10041000

## Opinion text

1 O
2
3
4
5
6 UNITED STATES DISTRICT COURT
7 FOR THE CENTRAL DISTRICT OF CALIFORNIA
8
9 CAP EXPORT, LLC, a California Case No. 2:16-cv-00371-JWH (MRWx)
Limited Liability Company,
10
Plaintiff, MEMORANDUM OPINION AND
11 ORDER ON MOTION FOR
v. PARTIAL SUMMARY JUDGMENT
12 RE INEQUITABLE CONDUCT
ZINUS, INC., a California corporation; [ECF No. 318] and MOTION FOR
13 and SUMMARY JUDGMENT RE
DOES 1 through 10, inclusive, INVALIDITY, ETC. [ECF No. 325]
14
Defendants.
15
ZINUS, INC. a California corporation,
16
Counterclaimant,
17
v.
18
CAP EXPORT, LLC, a California
19 Limited Liability Company,
20 Counterdefendant.
21
ZINUS, INC., a California corporation,
22
Third-Party Claimant,
23
v.
24
ABRAHAM AMOUYAL, an
25 individual; and
4MODA CORP., a California
26 corporation,
27 Third-Party Defendants.
1 I. INTRODUCTION
2 This action arises from a patent dispute concerning ready-to-assemble bed
3 frames where the components of the frame fit inside the headboard and ship in a
4 single box, nicknamed a “bed-in-a-box.” Defendant Zinus, Inc. holds U.S.
5 Patent No. 8,931,123 (the “’123 Patent”) covering such a bed frame. In 2015,
6 Zinus accused Plaintiff Cap Export, LLC of infringement on account of Cap
7 Export’s sale of products that are allegedly covered by the ’123 Patent. Cap
8 Export responded by commencing this declaratory relief action. Zinus filed a
9 counterclaim and a third-party complaint for patent infringement against Cap
10 Export and its principal, Third-Party Defendant Abraham Amouyal. In the
11 years that followed, the parties litigated this case extensively, which included the
12 following procedural highlights: (1) multiple motions for summary judgment;
13 (2) the Federal Circuit’s resolution of an appeal concerning this Court’s order
14 on one such motion; (3) the parties’ settlement, through which Cap Export
15 agreed to pay damages to Zinus arising from Cap Export’s purported
16 infringement; and (4) this Court’s entry of a stipulated judgment based upon
17 that settlement.
18 After Cap Export uncovered clear and convincing evidence that Zinus’s
19 patent expert and former president, Colin Lawrie, made several material
20 misrepresentations during his deposition—including Lawrie’s testimony
21 regarding his lack of knowledge of prior art bed frames and his business
22 relationship with an entity that purchased bed frames apparently similar to the
23 frame eventually claimed in the ’123 Patent—the Court set aside that stipulated
24 judgment.1 Based upon these revelations, the Court allowed additional
25

26 1 See Order Granting Cap Export’s Motion to Set Aside Judgment Pursuant
to FRCP 60(b)(3) (the “Rule 60 Order”) [ECF No. 295] (Judge Steven V.
27 Wilson, presiding) (providing detailed case history and granting Rule 60(b)(3)
motion to set aside judgment based upon fraud, misrepresentation, or
misconduct by opposing party). On May 5, 2021, in a published decision, the
1 discovery and permitted the parties to file renewed motions for summary
2 judgment.
3 Before the Court are two such motions. First, Cap Export and Abraham
4 Amouyal seek summary judgment of patent invalidity, non-infringement,
5 inequitable conduct, and unenforceability.2 Second, Zinus seeks partial
6 summary judgment that Colin Lawrie did not commit inequitable conduct.3
7 After considering the papers filed in support and in opposition of the
8 Motions, including supplemental briefing,4 and after conducting a hearing on the
9 Motions on February 18, 2021, for the reasons stated below, the Court will
10 GRANT in part and DENY in part Cap Export’s Motion for Summary
11
12
v. Zinus, Inc., ___ F.3d ___, No. 2020-2087, 2021 WL 1773696, at *1 (Fed. Cir.
13 May 5, 2021) (affirming because “Lawrie, Zinus’s president and expert witness,
misrepresented his knowledge of highly material prior art,” this Court
14 “properly declined to condone such conduct,” and this Court “did not abuse its
discretion in granting the motion to vacate the judgment under Rule 60(b)(3)”).
15 2 See Cap Export, LLC and Abraham Amouyal’s Mot. for Summ. J. of
Patent Invalidity, Non-Infringement, Inequitable Conduct, and Unenforceability
16 (the “Cap Export MSJ”) [ECF No. 325].
17 3 See Zinus Inc.’s Mot. for Part. Summ. J. That Colin Lawrie Did Not
Commit Inequitable Conduct (the “Zinus PMSJ”) [ECF No. 318].
18 4 To resolve these Motions, in addition to the Court’s prior orders in this
case, the Court has considered the following papers and all of their respective
19 attachments: (1) the Compl. [ECF No. 1]; (2) the Answer and Countercl. [ECF
No. 38]; (3) the First-Am. Third-Party Compl. [ECF No. 179] and (4) the
20 Answer thereto [ECF No. 337]; (5) the Cap Export MSJ [ECF No. 325], (6) the
Opp’n thereto (the “Zinus Opposition”) [ECF No. 363], and (7) the related
21 Reply (the “Cap Export Reply”) [ECF No. 368]; and (8) the Zinus PMSJ [ECF
No. 318], (9) the Opp’n thereto [ECF No. 364], and (10) the related Reply [ECF
22 No. 367]. At the hearing on this matter, Zinus requested supplemental briefing,
and the Court granted its request. See Order Re Supplemental Briefing on
23 Motions for Summary Judgment [ECF No. 373]. After the parties filed their
supplemental briefs, see Zinus Suppl. Br. [ECF Nos. 375]; Cap Export Supp. Br.
24 [ECF No. 376], Zinus filed an Ex Parte Application to Strike Cap Export’s
Supplemental Brief [ECF No. 377]. Cap Export filed an Opposition [ECF
25 No. 378]. The Court declined to strike the brief, but, “in the interest of
providing a complete record for any appeal that may ultimately arise in this
26 matter, and to ensure that Zinus has a full and fair opportunity to present its
arguments on the underlying cross-motions for summary judgment,” the Court
27 “allow[ed] Zinus to file a reply to Cap Export’s responsive supplemental brief,”
See Order on Ex Parte Application [ECF No. 379]. Accordingly, Zinus filed an
1 Judgment. Specifically, the Court will grant the Motion on the issue of patent
2 invalidity and will deny it as moot on the issues of infringement and inequitable
3 conduct. The Court will DENY as moot Zinus’s Motion for Partial Summary
4 Judgment on the issue of inequitable conduct. After those rulings, the only
5 remaining claim for relief in the case is Zinus’s unfair business practices claim
6 under Cal. Bus. & Prof. Code § 17200, which appears in both Zinus’s
7 counterclaim and its third-party claim. The Court will decline to exercise
8 supplemental jurisdiction over this sole remaining state-law claim.
9 II. LEGAL STANDARD
10 Summary judgment is appropriate when there is no genuine issue as to
11 any material fact and the moving party is entitled to judgment as a matter of law.
12 Fed. R. Civ. P. 56(a). When deciding a motion for summary judgment, the
13 Court construes the evidence in the light most favorable to the non-moving
14 party. Barlow v. Ground, 943 F.2d 1132, 1135 (9th Cir. 1991). However, “the
15 mere existence of some alleged factual dispute between the parties will not defeat
16 an otherwise properly supported motion for summary judgment; the
17 requirement is that there be no genuine issue of material fact.” Anderson v.
18 Liberty Lobby, Inc., 477 U.S. 242, 247–48 (1986) (emphasis in original). The
19 substantive law determines the facts that are material. Id. at 248. “Only
20 disputes over facts that might affect the outcome of the suit under the governing
21 law will properly preclude the entry of summary judgment.” Id. Factual
22 disputes that are “irrelevant or unnecessary” are not counted. Id. A dispute
23 about a material fact is “genuine” “if the evidence is such that a reasonable jury
24 could return a verdict for the nonmoving party.” Id.
25 Under this standard, the moving party bears the initial burden of
26 informing the district court of the basis for its motion and identifying the
27 portions of the pleadings and record that it believes demonstrate the absence of
1 When the non-moving party bears the burden of proof at trial, the moving party
2 need not produce evidence negating or disproving every essential element of the
3 non-moving party’s case. Id. at 325. Instead, the moving party need only prove
4 there is an absence of evidence to support the non-moving party’s case. Id.; In
5 re Oracle Corp. Sec. Litig., 627 F.3d 376, 387 (9th Cir. 2010). The party seeking
6 summary judgment must show that “under the governing law, there can be but
7 one reasonable conclusion as to the verdict.” Anderson, 477 U.S. at 250.
8 If the moving party sustains its burden, the non-moving party must then
9 show that there is a genuine issue of material fact that must be resolved at trial.
10 Celotex, 477 U.S. at 324. A genuine issue of material fact exists “if the evidence
11 is such that a reasonable jury could return a verdict for the non-moving party.”
12 Anderson, 477 U.S. at 248. “This burden is not a light one. The non-moving
13 party must show more than the mere existence of a scintilla of evidence.”
14 Oracle Sec. Litig., 627 F.3d at 387 (citing Anderson, 477 U.S. at 252). The non-
15 moving party must make this showing on all matters placed at issue by the
16 motion as to which it has the burden of proof at trial. Celotex, 477 U.S. at 322;
17 Anderson, 477 U.S. at 252.
18 III. DISCUSSION
19 A. Technology Background
20 Zinus is the assignee of the ’123 Patent for an “assemblable mattress
21 support whose components fit inside the headboard.”5 The patent issued on
22 January 13, 2015,6 and Suk Kan Oh is the named inventor.7 The patent’s
23 Abstract explains that the claimed bed frame “can be shipped with all of its
24 components compactly packed into the headboard.”8 As depicted below, “[t]he
25

26 5 See ’123 Patent, available at ECF No. 179-1.
6 Id.
27
7 Id.
1|| mattress support includes a foldable longitudinal bar, a lateral bar, side panels,
wooden slats, block legs and a footboard, all of which fit inside a compartment in
) )
the headboard.””?
4 ASSEMBLABLE
‘SOPFORT
5
HEACRONRD
6 FLAP AI COMPARTMENT
8 ee
mee ANS NN a>.
7 Kf Wee Ne 2 >
5 oS □ ae N Bo
fe 8 eo 2 NS i ee fe eee
es
PO cok SNARE RM eer Ee
9 geenhiy taeieaaeremcanss. dace ENC eM Garten Piecaepe teeth
priest rania metre cies) sniince Nikos Qe Hees BACK SIDE OF
MONE
10 ke Cy AN Fe
a ee a nN nage ccc eet
Pome Ae oer cee mae scicisn immianidse Brice 5) ce Myanmar acca
11 ee SO}; oi aia
er Sop eae ae es. Wee □□□ ee
mores □□□ ab gies Sane Tage cs ae Pa
□□ ESI OCT STL a ae
i ee ea a aa
Ro ee ;
13 ae
a ee
14 te moe rece ts
24
ZIPPER
15
16 According to the patent, this bed frame “overcomes the shortcomings of
)
17 || conventional beds” because it avoids the need for “multiple tools and many
18 || non-intuitive [assembly] steps” and avoids the “relatively heavy weight” of
19|| beds, which makes moving “cumbersome” and increases shipping costs."®
20 Claim 1 discloses:
21 A mattress support comprising:
22 a longitudinal bar with a first connector and a second
23 connector;
24 a headboard with a compartment and a third connector; and
25
26
27\| > 7)
? Td.
© — See id. at 1:34-45.

1 a footboard with a fourth connector, wherein the first
2 connector is adapted to attach to the third connector, wherein the
3 second connector is adapted to attach to the fourth connector,
4 wherein legs are attached to a bottom side of the footboard, wherein
5 the longitudinal bar and the footboard fit inside the compartment of
6 the headboard, wherein the first connector is directly connected to
7 the third connector, and the second connector is directly connected
8 to the fourth connector in an assembled state of the mattress
9 support, wherein the first connector is not connected to the third
10 connector, and the second connector is not connected to the fourth
11 connector in a compact state of the mattress support, and wherein
12 the longitudinal bar and the footboard are contained inside the
13 compartment in the compact state of the mattress support.11
14 The remaining non-method claims expand upon certain features of the
15 bed frame. Claim 2 relates to the bed frame legs and discloses specific
16 “headboard legs” and “footboard legs”; Claim 3 discloses a storage
17 compartment that closes with a zipper; Claim 11 discloses support legs that are
18 “pivotally attached” to the lateral bar where the legs attach directly to the
19 footboard.12 Claim 4 discloses a method for placing all of the components inside
20 of the headboard storage compartment, with the remaining claims depending
21 directly or indirectly from this method claim, further disclosing specifics related
22 to packing the components into the headboard.13
23
24
25
26
11 Id. at 6:20-40.
27
12 See id. at 6:41-7:1-3 & 8:14-25.
1 Zinus contends that Cap Export infringes Claims 1 through 3 of the ’123
2 Patent, and, thus, the Court’s analysis addresses only those claims.14
3 B. Patent Invalidity
4 In its Motion for summary judgment, Cap Export raises several invalidity
5 arguments regarding the ’123 Patent. To streamline its analysis, the Court will
6 summarize the parties’ arguments and then address each of Cap Export’s
7 invalidity theories in turn.
8 1. Summary of the Parties’ Arguments
9 Cap Export seeks summary judgment of invalidity based upon the same
10 theory that it presented to the Court to set aside the judgment. Specifically, Cap
11 Export contends that when Lawrie was the president of Zinus, in connection
12 with Lawrie’s former company (i.e., Jusama) Lawrie purchased a “bed-in-a-
13 box”—called the “Mersin” bed—from a third-party manufacturer, Woody
14 Furniture. Cap Export asserts that Lawrie made that purchase several years
15 before September 25, 2013—the date that the application for the ’123 Patent was
16 filed.15 Lawrie admitted during his 2019 deposition that contemporary email and
17 documentary evidence confirms that he bought the beds, but Lawrie said that he
18 did not remember doing so. The Court found that Lawrie misrepresented his
19 knowledge of this bed-in-a-box, and the Federal Circuit affirmed that ruling. As
20 relevant here, Lawrie denied any knowledge concerning whether and how the
21 named inventor, Suk Kan Oh, learned of the public domain beds.16 After the
22 Court entered its order setting aside the judgment, Cap Export obtained emails
23 supposedly showing that Lawrie ordered Woody’s bed-in-the-box for shipment
24
25
14 See Zinus, Inc.’s First Am. and Supp. Third Party Complaint at ¶ 57
26 (“Claims 1-3 of the ’123 Patent read on each and every one of the [accused]
headboard bed frames.”).
27
15 See Cap Export MSJ at 3:14-4:23.
1 to Oh in China, allegedly for “copying and patenting.”17 Based upon those
2 emails, Cap Export concludes that “Zinus’s literal infringement claims against
3 Cap Export’s accused beds invalidate the ’123 Patent because the accused beds
4 are a carbon copy of Woody’s earlier public domain beds.”18
5 Cap Export argues that Lawrie’s 2019 deposition testimony demonstrates
6 invalidity because Lawrie admitted that Woody’s “PC001C” bed “(a) [was] the
7 same ‘invention’ by teaching all of the elements of claims 1, 2, and 3 of the ’123
8 Patent; (b) was ready for patenting because physical embodiments were
9 commercially purchased and sold; and (c) was in public use by way of
10 presentation at tradeshows, sales to third parties, and Lawrie’s purchase and
11 sale of 1,205 units to the general public.”19
12 Just as Lawrie testified that he could look at pictures of Cap Export beds
13 to determine infringement, Cap Export likewise contends that the pictures of a
14 prior art Woody bed-in-a-box demonstrate all of the elements of the ’123 Patent,
15 thereby invalidating its claims.20 Cap Export also argues that the patented bed is
16 obvious in light of the Woody bed-in-a-box (a theory that the Court summarizes
17 separately below).
18 Zinus responds that Cap Export’s invalidity arguments fail because they
19 are “based on a false premise that there existed a single, unique bed structure
20 that Cap Export refers to as ‘Woody’s and XXITC’s Public Domain Bed-In-A-
21 Box.’”21 Zinus maintains that the design of the beds that Woody shipped to
22
23

24 17 Id. at 1.
25 18 Id. at 2:4-6.
19 Id. at 15:16-20.
26
20 See id. at 7:10-11:18.
27 21 Zinus Opposition at 1:4-6 (noting that XXITC was “Woody Furniture’s
factory named Xiamen Xinshunyang Industry and Trading Co., Ltd.,” which
1 Lawrie in Canada changed across the three orders in 2010, 2012, and 2013.22
2 Because Cap Export limited its claim-by-claim analysis to beds in the second
3 Woody shipment, Zinus responds with respect to only that model.23 Relatedly,
4 Zinus contends that because Cap Export cited only two exhibits used in the
5 Lawrie Deposition as evidence in support of its Motion, Zinus need respond to
6 only that evidence.24
7 With respect to the first piece of evidence—the “Inspection Report”—
8 Zinus maintains that the photographed bed lacks (1) a “first connector” and
9 “second connector” on the longitudinal bar on the bed; (2) a “third connector”
10 on the headboard and a “fourth connecter” on the footboard; and (3) an
11 element corresponding to the limitation that “the second connector is directly
12 connected to the fourth connector in an assembled state of the mattress
13 support.”25 With respect to the second piece of evidence—the “Assembly
14 Instructions”—Zinus argues that this document cannot show the missing claim
15 limitations because Cap Export does not demonstrate that the Assembly
16 Instructions relate to the same bed pictured in the Inspection Report.26
17 In an effort to defeat Cap Export’s Motion, Zinus proffers several alleged
18 disputes of material fact:
19  Whether the Assembly Instructions relate to the same bed in the
20 Inspection Report (Zinus claims that not all Woody bed-in-a-box products
21
22
22 Id. at 1-2.
23
23 Id. at 2.
24 24 Id. at 3; see Supplemental Declaration of David P. Beichtman Re
Videotaped Deposition of Colin Lawrie Taken on November 15, 2019, in Canada
25 (the “Lawrie 2019 Deposition”) [ECF No. 276], Ex. 560, at p. 329 of 341 (the
“Inspection Report”), and Ex. 557, at p. 314 of 341 (the “Assembly
26 Instructions”). Zinus raises an evidentiary objection to the Assembly
Instructions, which the Court addresses and overrules below.
27
25 Zinus Opposition at 3:27-4:11.
1 were the same and that the instructions visible in the Inspection Report
2 photos are different than the Assembly Instructions).
3  Whether the footboard in the Inspection Report bed has a “fourth
4 connector” that connects a “second connector” on the longitudinal bar
5 to the footboard, or, rather, only a “hole in the footboard.”
6  Whether the bed in the Inspection Report was publicly used for its
7 intended purpose at a tradeshow, sold at a “commercial price,” or subject
8 to a “commercial sale,” such that it qualifies as prior art.
9  Whether the Assembly Instructions were ever published such that they
10 are a prior art publication.27
11 Zinus also argues that, because Cap Export did not demonstrate a prima
12 facie case of obviousness, there is nothing to which Zinus must respond, and
13 Zinus will not “generate a strawman argument” so that Cap Export can “poke
14 holes” in it.28 Zinus further contends that the bed depicted in the Inspection
15 Report is missing a “fourth connector” on the footboard; it is missing a “second
16 connector” on the longitudinal bar adapted to attach to the fourth connector;
17 and the unauthenticated Assembly Instructions cannot fill in any gaps.29 Zinus
18 asserts that Cap Export likewise fails to show that one skilled in the art would
19 have had a reason to combine the various elements from the prior art to make
20 the patented bed.30
21 2. Analysis
22 a. Burden of Proof
23 To obtain summary judgment of invalidity, a moving party must
24 overcome the statutory presumption that issued patent claims are valid. See 35
25

26 27 Id. at 4-18.
28 Id. at 20:4-6.
27
29 Id. at 20:11-18.
1 U.S.C. § 282. That statute mandates that “[a] patent shall be presumed valid”
2 and that “[t]he burden of establishing invalidity of a patent or any claim thereof
3 shall rest on the party asserting such invalidity.” Id. A party seeking to
4 overcome the statutory presumption and to establish the invalidity of an issued
5 patent claim must prove the invalidity by clear and convincing evidence. See
6 Microsoft Corp. v. I4I Ltd. P’ship, 564 U.S. 91, 112 (2011).
7 As the party seeking to invalidate the ’123 Patent, Cap Export thus bears
8 the burden of proving invalidity by clear and convincing evidence.
9 b. Evidentiary Objections
10 Zinus raises a number of evidentiary objections.31 The Court rules on only
11 those objections that are material to its underlying decision. Where the Court
12 does not rely on certain challenged evidence, no ruling is necessary. Cf. Norse v.
13 City of Santa Cruz, 629 F.3d 966, 973 (9th Cir. 2010) (district court “must also
14 rule on evidentiary objections that are material to its ruling”).
15 Zinus challenges the Assembly Instructions as “unauthenticated, hearsay
16 and inadmissible.”32 Zinus contends that the Assembly Instructions cannot be
17 used to prove the structural detail of the bed depicted in the Inspection Report;
18 i.e., the bed sold to Jusama/Lawrie in 2012.33 Zinus proffers that the Assembly
19 Instructions were attached to a different Purchase Order number than the one
20 associated with the Inspection Report bed and that the photos depicting
21 assembly instructions in the Inspection Report show a different set of
22 instructions.34 In view of those alleged infirmities, Zinus contends that it would
23 be improper for the Court to use the Assembly Instructions to determine “what
24
25
31 See Zinus’s Evid. Obj. to Cap Export’s Statement of Uncontroverted
26 Facts [ECF No. 363-2].
32 Zinus Opposition at 5:15-16.
27
33 Id. at 5:16-19.
1 the detail of the longitudinal bar-to-footboard attachment may have been in the
2 bed of the photograph of the Inspection Report.”35
3 Cap Export responds that the Declaration of Yuxian Xie, a then-employee
4 of XXITC, authenticates the Assembly Instructions, i.e., the “Fusion Bed In
5 Box installation instructions,” and that the declaration provides pictures of the
6 same instructions alongside the corresponding bed-in-a-box.36
7 In its tentative ruling, which the Court provided to the parties before the
8 hearing, the Court credited-in-part Zinus’s argument that the Assembly
9 Instructions should not be considered with respect to the Mersin bed purchased
10 by Jusama/Lawrie. Based upon the Xie Declaration, however, the Court was
11 inclined to consider the Assembly Instructions with respect to whether the
12 XXITC-manufactured “Fusion” bed was invalidating. At the hearing and
13 through subsequent briefing, the parties have raised additional, relevant
14 arguments concerning, inter alia, whether the Mersin bed and Fusion bed are
15 the same and whether the Xie Declaration is admissible. With the benefit of the
16 parties’ additional arguments and briefing, after considering the full summary
17 judgment record, to simplify the issues for any appeal, the Court concludes that
18 the proper course of action is to analyze invalidity based upon the Mersin bed
19 sold to Jusama/Lawrie in 2012. Accordingly, the Court will resolve the related
20 evidentiary objection by analyzing whether the Assembly Instructions are
21 admissible concerning the Mersin bed purchased by Jusama/Lawrie in 2012.
22 As Zinus observes, the “physical structure” of the Mersin bed “is
23 pictured in the ‘Inspection Report’ marked as Exhibit 560 to the 2019
24 deposition of Mr. Lawrie.”37 The Inspection Report relates to invoice number
25
35 Id. at 7:26-8:2.
26
36 Cap Export Reply at 16:1-3 (citing Decl. of Yuxian Xie In Supp. of Cap’s
27 MSJ (the “Xie Declaration”) [ECF No. 325-3] at Ex. 4, p. 33).
37 Zinus Suppl. Br. at 2 (citing 2019 Lawrie Deposition, Ex. 560, available at
1 “WM011190,” which corresponds to Jusama/Lawrie’s 2012 purchase of the
2 Mersin bed-in-a-box; this relationship is confirmed by Agnes Tan, the marketing
3 director of Woody, and by Colin Lawrie, the then-president of Zinus.38 Notably,
4 unlike the Xie Declaration to which Zinus has mounted various challenges,
5 Zinus does not challenge Agnes Tan’s credibility, her ability to authenticate
6 Woody-related exhibits, or the statements and testimony contained in her
7 declaration and deposition testimony.
8 Tan authenticates (and Lawrie does not dispute) the February 9, 2012,
9 invoice sent “Attn: Mr. Colin Lawrie” and signed by Lawrie,39 for 405 units of
10 the Mersin bed-in-a-box.40 The invoice describes the bed frames as “metal,”
11 including a “metal rail.”41 According to email correspondence related to the
12 invoice, this was a “repeat order” of the platform beds, and Tan provides the
13 referenced earlier invoice as well.42 Further, Tan explained at her deposition
14 that, in connection with preparing the 2012 Jusama/Lawrie Mersin bed
15 shipment, the Inspection Report includes various quality control-related photos
16 of a Mersin bed and its packaged contents, shown in various stages of assembly.
17 Example images include the following:43
18
19
38 See, e.g., Decl. of Agnes Tan (the “Tan Declaration”) [ECF No. 249-6],
20 at ¶ 3 (Colin Lawrie signed invoice number WMO11190, dated February 9,
2012, which was an invoice for “a bed with all components fitting inside the
21 headboard”); Decl. of Andre Boniadi in Supp. of Cap Export’s Motion for
Summary Judgment [ECF No. 325-2], Ex. B (the “2019 Tan Deposition”) at
22 15:15-16:24 (authenticating the invoice); 2019 Lawrie Deposition at 117:22-119:1
(confirming that Lawrie’s signature appears on the invoice) & 179:3-20
23 (confirming that the Inspection Report matches the invoice number).
39 Tan Declaration, Ex. A.
24
40 Id. at ¶¶ 2 & 3.
25 41 See id., Ex. A.
26 42 See Lawrie 2019 Deposition, Ex. 554, p. 299 of 341; see also id., Ex. 555,
(2011 invoice), p. 306 of 341.
27 43 See Lawrie 2019 Deposition, Ex. 560 at 1; see also 2019 Tan Deposition at
23:3-26:24 (Tan explaining that the Inspection Report corresponds to Lawrie’s
1 fy
2 Pl iy
Ce
4 ae re
5 aa
oa Re
6 eS

8 ee
9 hs
10
11
12
13 Several photos depict how the Mersin bed was shipped, including images
44||_ of individual components and ancillary materials such as a set of assembly
instructions, as depicted below:**
16 ~
17 □□
18
19 noi
20 □ ccaie aeep
an on oem Tigphien eben ving ae
21 Beets
6 ‘ ZB

4 > \ ie

| © £0)
AY □
Lo . □□□ ‘S>

A
2 Ae.
ve sO
11 Cre Uf
12 K€
™
13
14
15 Based upon the foregoing analysis, the Court OVERRULES Zinus’s
16 || objections to the Assembly Instructions and considers them relevant in the two
17 || ways summarized above. Because the Court declines to rely on the Xie
18 || Declaration, the Court need not resolve Zinus’s objections to Xie as a witness or
19 || to the documents attached to Xie’s declaration.
20 Next, the Court turns to Cap Export’s Requests for Judicial Notice. The
21 || Court GRANTS Cap Export’s First Request for Judicial Notice,” which
contains documents proper for notice under Rule 201 of the Federal Rules of
23 || Evidence, and to which Zinus did not respond or object. The Court DENIES as
24
25
26
27|| *” — See Req. for Judicial Notice in Support of Cap Export’s MSJ (“Ca
Exports Request ft Judicial Notice”’) fECF No. 35-4), mttaching ¢ prior Order
28 || and prior declarations and exhibits submitted by Zinus in this case.

1 moot Cap Export’s Second Request for Judicial Notice,50 because the Court
2 finds it unnecessary to rely on the proposed material to resolve the pending
3 Motions.
4 c. On-Sale Bar
5 A patent is invalid if the “the claimed invention was patented, described
6 in a printed publication, or in public use, on sale, or otherwise available to the
7 public [more than one year] before the effective filing date of the claimed
8 invention.” 35 U.S.C. § 102(a)-(b). “Whether the on-sale bar applies is a
9 question of law based on underlying factual findings.” Medicines Co. v. Hospira,
10 Inc., 827 F.3d 1363, 1371 (Fed. Cir. 2016). The Federal Circuit observed that the
11 Supreme Court has “clarified that the on-sale bar under 35 U.S.C. § 102(b)
12 applies when, before the critical date, the claimed invention (1) was the subject
13 of a commercial offer for sale; and (2) was ready for patenting.” Id. at 1372
14 (citing Pfaff v. Wells Elecs., Inc., 525 U.S. 55, 67-68 (1998)). The first prong
15 should “‘be analyzed under the law of contracts as generally understood.’” Id.
16 at 1373 (quoting Group One, Ltd. v. Hallmark Cards, Inc., 254 F.3d 1041, 1047
17 (Fed. Cir. 2001)). The second prong should be analyzed with reference to
18 whether the challenger can show “(1) proof of a reduction to practice; or
19 (2) drawings or other descriptions sufficiently specific to enable a person of
20 ordinary skill to practice the invention.” Id. at 1373.
21 Cap Export argues that the ’123 Patent is invalid under the on-sale bar by
22 relying on the bed-in-a-box products offered for sale and sold to Jusama/Lawrie
23 in Canada more than one year before the patent filing date. Zinus counters that
24 it is unclear from the Woody invoices and related documents whether any
25 Woody beds had elements corresponding to all of the claim limitations of the
26

27 50 See Req. for Judicial Notice in Supp. of Cap Export’s MSJ (“Cap
Export’s Second Request for Judicial Notice”) [ECF No. 376-1], attaching a
1 ’123 Patent. Zinus also questions whether Lawrie’s purchases from Woody
2 constitute commercial sales at a commercial price and whether displaying a
3 product at a trade show qualifies as public use.
4 Offering a product for sale at a trade show is typically sufficient to raise
5 the on-sale bar. See Pride Family Brands, Inc. v. Carl’s Patio, Inc., 992
6 F. Supp. 2d 1214, 1218 (S.D. Fla. 2014) (distributing furniture catalog depicting
7 relevant chair to potential customers at an industry trade show more than one
8 year before patent application invalidated invention). In this instance, however,
9 Cap Export’s evidence concerning trade shows is insufficient to raise the on-sale
10 bar. Lawrie provided some testimony concerning attending trade shows, but it is
11 too vague for the Court to determine whether the beds that he may have viewed
12 at trade shows were the same as the invention claimed in the ’123 Patent.51
13 Conversely, the evidence concerning actual sales of bed-in-a-box products
14 is sufficient to raise the on-sale bar if those beds contain all of the claim elements
15 of the ’123 Patent. That is, if those beds render the patent invalid for
16 anticipation (as discussed in the next section), then the fact that they were
17 reduced to practice and openly sold to multiple customers would simultaneously
18 raise the on-sale bar.
19 Cap Export proffers evidence that the bed-in-a-box products were
20 reduced to practice and commercially sold since 2010. For example, as
21 discussed above, Agnes Tan confirms that, in 2012, Woody sold to
22 Jusama/Lawrie “a bed with all components fitting in the headboard, including
23 the footboard and the longitudinal bar, for shipping.”52 Tan explains that this
24 purchase involved a “bed in a box,” which “means that all the parts, [are] put
25 into the headboard at the back, and then we zip it up and, you know, [it]
26
27
51 See Lawrie 2019 Deposition at 70:8-73:11.
1 become[s] one piece packed in a box.”53 Tan’s sworn statements and the
2 supporting documentary evidence that she provides are sufficient to establish
3 clear and convincing evidence of commercial sales. See Eisenberg v. Alimed, Inc.,
4 243 F.3d 555 (Fed. Cir. 2000) (accepting as clear and convincing evidence
5 testimony from “a nonparty testifying about an unpatented invention” made
6 before the relevant date).
7 As discussed, Zinus does not challenge Tan’s personal knowledge or
8 credibility, or the authenticity of the invoices that Tan attests were “kept in the
9 ordinary course of Woody Furniture Manufacturing’s business.”54 Instead,
10 although Lawrie claims no independent recollection of these orders or the
11 existence of the beds—a representation that this Court and the Federal Circuit
12 have already rejected—Lawrie admits that the invoice bears his signature and
13 that he has no evidence to contradict the invoice.55 Thus, if any of the
14 commercially sold beds are the same as the bed disclosed in the patent, then Cap
15 Export has presented clear and convincing evidence to invoke the on-sale bar.
16 The Court finds unpersuasive Zinus’s other arguments attempting to
17 discredit Cap Export’s on-sale bar defense. Zinus provides no authority for the
18 proposition that a low number of sales, low quality, unprofitable sales, or
19 government subsidies necessarily affect the otherwise commercial nature of the
20 undisputed bed sales identified by Tan. The Court is aware of no “loss” or
21 “low quantity/quality” exceptions for commercial sales. See, e.g., Application of
22 Dybel, 524 F.2d 1393, 1401 (C.C.P.A. 1975) (“Although selling the devices for a
23 profit would have demonstrated the purpose of commercial exploitation, the fact
24
53 2019 Tan Deposition at 17:15-20. During her deposition, Tan testified
25 that Woody had been selling a bed-in-a-box product since 2010, and she
provided details regarding Jusama/Lawrie’s other two bed-in-a-box orders from
26 Woody in 2011 and 2013. See, e.g., id. at 38:21-39:2. As discussed above,
however, for the purposes of this Motion, the Court focuses on the 2012 order.
27
54 Tan Declaration at ¶ 5.
1 that appellant realized no profit from the sales does not demonstrate the
2 contrary.”); see also Atl. Thermoplastics Co. v. Faytex Corp., 970 F.2d 834, 836
3 (Fed. Cir. 1992) (“A single sale or offer to sell suffices to bar patentability.”).
4 Relatedly, offering beds for sale constitutes “public use.” See Dzinesquare, Inc.
5 v. Armano Luxury Alloys, Inc., No. CV 14-01918-JVS-(JCGx), 2014 WL
6 12597154, at *6 (C.D. Cal. Dec. 22, 2014) (website postings and catalogs are
7 publicly accessible).
8 d. Anticipation
9 “A patent is invalid for anticipation if a single prior art reference discloses
10 each and every limitation of the claimed invention.” Schering Corp. v. Geneva
11 Pharm. Inc., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (internal citation omitted).
12 “[I]t is axiomatic that that which would literally infringe if later anticipates if
13 earlier.” See Bristol-Myers Squibb Co. v. Ben Venue Labs., Inc., 246 F.3d 1368,
14 1378 (Fed. Cir. 2001). Anticipation under 35 U.S.C. § 102 is a question of fact,
15 but it may be resolved on summary judgment if no genuine dispute of material
16 fact exists. See OSRAM Sylvania Inc. v. Am. Induction Techs. Inc., 701 F.3d 698,
17 704 (Fed. Cir. 2012). Moreover, “[s]ummary judgment is proper if no
18 reasonable jury could find that the patent is not anticipated.” Id. (citing Zenith
19 Elecs. Corp. v. PDI Commc’n Sys. Inc., 522 F.3d 1348, 1356–57 (Fed. Cir. 2008)).
20 “In deciding the issue of anticipation, the trier of fact must identify the elements
21 of the claims, determine their meaning in light of the specification and
22 prosecution history, and identify corresponding elements disclosed in the
23 allegedly anticipating reference.” Lindemann Maschinenfabrik GMBH v. Am.
24 Hoist and Derrick Co., 730 F.2d 1452, 1458 (Fed. Cir. 1984).
25 To show anticipation, Cap Export relies on the “Woody bed-in-a-box
26 Lawrie had been purchasing three years before the patent application filing
27
1 date.”56 In its claim analysis chart, Cap Export provides photographs from the
2 Inspection Report and images from the Assembly Instructions.57 Zinus first
3 argues that Cap Export did not carry its burden, and, thus, Zinus need not
4 respond. Zinus also counters that there is no singular “Woody bed-in-a-box”
5 product to analyze, and, in any event, the pictures of the Inspection Report bed
6 show that it lacks a “first connector” and “second connector” on the
7 longitudinal bar, a “third connector” on the headboard, and a “fourth
8 connecter” on the footboard. Finally, Zinus maintains that the alleged prior-art
9 Inspection Report bed has no element corresponding to the limitation that “the
10 second connector is directly connected to the fourth connector in an assembled
11 state of the mattress support.”58
12 As Zinus suggests, the Court will focus its anticipation analysis on the
13 2012 Mersin bed shown in the Inspection Report. The Court begins by
14 identifying the disputed claim elements as the relevant points of inquiry for its
15 anticipation analysis (the elements underlined in the table below). Next, the
16 Court construes those elements. Finally, the Court considers whether those
17 elements are present in the 2012 Mersin bed-in-a-box.59 See Lindemann, 730
18 F.2d at 1458.
19 The Court previously addressed claim construction issues and concluded
20 that plain and ordinary meaning applies.60 In view of the non-technical nature of
21

22 56 Cap Export MSJ at 11:11-13.
57 See id. at 8-11 (relying on Lawrie 2019 Deposition Exs. 557 & 560).
23
58 See Zinus Opposition at 20:2-21:7.
24 59 Zinus had the opportunity to challenge the evidence concerning any other
claim limitations. Thus, the Court deems Zinus’s silence as consent to granting
25 the Motion with respect to those unchallenged claim limitations. See L.R. 7-12.
Even absent the application of this Local Rule, Lawrie’s apparent concession
26 that the beds are the same also weighs against allowing Zinus belatedly to
challenge additional claim elements. See, e.g., Lawrie 2019 Depo. at 183:16-25,
27 187:11-189:20.
60 See, e.g., In Chambers Order [ECF No. 154] at 15 (“Here, all of the words
1 the invention, the straightforward claim language, and the clear specification,
2 the Court declines to disturb this conclusion. See Phillips v. AWH Corp., 415
3 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (claim terms “are generally given
4 their ordinary and customary meaning”).
5
6 Disputed Claim Limitations
7 a longitudinal bar with [1] a first connector and [2] a second connector;
8 a headboard with a compartment and [3] a third connector; and a footboard with
9 [4] a fourth connector, wherein . . . [5] the second connector is directly
10 connected to the fourth connector in an assembled state of the mattress
11 support
12
13 When read in light of the specification, the disputed limitations are easily
14 understood. The specification teaches that “[t]he first connector on the
15 longitudinal bar is adapted to attach to a third connector on the outside of the
16 headboard. And the second connector on the longitudinal bar is adapted to
17 attach to a fourth connector on the footboard.”61 In other words, one end of the
18 longitudinal bar “includes a first connector 28” that connects the longitudinal
19 bar to the headboard, while the other end of the longitudinal bar includes “a
20 second connector 29” that connects it to the footboard.62
21 In one embodiment depicted in the specification, the third connector 43,
22 to which the first connector attaches, “is formed by two bolts with large flat
23
24
special meaning or suffers from any ambiguity. Thus, no extrinsic evidence is
25 necessary and the terms used in Claims 1-3 are given their customary
meaning.”); In Chambers Order Granting Plaintiff’s Motion for Summary
26 Judgment [ECF No. 70] (“In essence, this claim [i.e., Claim 1] describes a bed
frame that can be taken apart.”).
27
61 ’123 Patent at 2:13-16.
1|| heads. Alternatively, regular bolts with washers can be used.” Similarly, in
this embodiment, the fourth connector 44, to which the second connector
|) attaches, “is formed by two bolts with washers over which slots in [the second]
4|| connector 29 slide.”
5 To illustrate these structural relationships, Figure 5 shows the first
6 || connector 28 and third connector 43 (z.e., the bolts) connecting the headboard to
|| the longitudinal bar, along with a detailed depiction of the second connector 29
|| on the longitudinal bar that connects with the footboard bolts (¢.e., the fourth
9|| connector):
10
v2 neappoaro
ee
12 Gs Ne
Cf gee
13 ven tag gua is NY fift
14 rK 33
15 \
16 : BS LONGITUDINAL
PMA 34 RAR
od _— aa
17 i | ~*~

19 \ \

22
Figure 7 further illustrates the footboard connection, depicting the “slot in [the
|| second] connector 29 [that] has not yet slid down over bolt 44 [the fourth
□□ connector]”:°
26 |} ——— SSS
68 Td. at 4:48-49
64 Td. at 4:65-67.
28) & — Td. at 4:67-5:1; see also id. at Fig. 7.

1

2

3
4

5

6

7

8

9

10
11
12 Several pieces of evidence support the conclusion that the 2012 Mersin
13 bed contained all of the disputed elements later claimed in the ’123 Patent.
14 First, Agnes Tan, who has worked at Woody since 1997 and has been its
15 marketing director since at least 2011, testifies that the Mersin bed purchased by
16 Jusama/Lawrie included a longitudinal bar that fit inside the headboard for
17 shipping.66 Second, the Inspection Report relating to the 2012 Mersin bed
18 shipment shows that the disputed claim elements were present in this prior art
19 bed. Using the nearly identical 2011 Mersin Assembly Instructions—which
20 were attached to an email chain including Tan and were shown to Lawrie as
21 Exhibit 557 during his 2019 deposition—to confirm the blurry images, the
22 instructions packed with the 2012 Mersin bed explain how to connect the
23 longitudinal bar (aka “centre support rail”) to the headboard and footboard,
24 both verbally and pictorially. Both sets of instructions, one blurry and one clear,
25
26
27
1|| describe the connection between the longitudinal bar and headboard and
2|| footboard as follows.%
3
4
6
5 @
SS Ze
6 Do Be
’
9 6)Attach the centre support rails (4) to headboard(1) and
0 footboard(2) as shown.

11
12 Similarly, another photo in the Inspection Report shows the assembled
13 || connection.%
14 aera
ae te: EAS
15 ree ‘gitees se
16 Bees
i ne) 3 bas
17 Meiers
i is! eS
18 Bae
Bea
19 peace:
0 Bo See:

21
ww
22
23 Disregarding the Assembly Instructions, Zinus argues that this photo
“proves that the Mersin bed does not have either the recited ‘second connector’
25
26 |} —
67 See Lawrie 2019 Deposition, Ex. 557 at p. 2 of instructions, available at
27 || ECF No. 276 at p. 318 of 341.
□ See id. at 3.

1 or ‘fourth connector’ of asserted claims 1-3.”69 In support, Zinus relies on the
2 declaration of its Rule 30(b)(6) witness, Cyndi Hunting. Hunting testifies,
3 it is not possible to tell from the Inspection Report alone exactly how
4 the center support rail of the frame might have engaged the
5 headboard and what kind of connector, if any, may have been used in
6 that location. It is possible that there was no connector. In making
7 this statement and determination, I am assuming that all the
8 photographs of beds in the Inspection Report are photographs of the
9 same single physical bed.70
10 Hunting continues,
11 I do not believe that any person could honestly look at the
12 photographs of the Inspection Report and say that she or he sees a
13 connector on the end of any center support rail that is connecting
14 that bar to any headboard. None of the photographs is adequate to
15 make that determination.71
16 After concluding that the Inspection Report is inconclusive, Hunting opines that
17 [i]n my educated opinion, the photograph replicated above most
18 likely shows a rectangular hole of some sort. That hole appears to
19 extend from the inside fabric surface of the footboard into the
20 footboard for a distance of about an inch. Although the end of the
21 hole appears to be white in the photograph, I conclude that the hole
22 does not extend all the way through to the other side of the footboard
23 because such a design would be ugly and would lack customer
24 appeal.72
25

26 69 Zinus Suppl. Br. at 3:2-4.
70 Hunting Declaration at ¶ 18.
27
71 Id. at ¶ 19.
1 To support Hunting’s statements, Zinus provides a declaration from
2 another Zinus employee, Jayson Lee.73 As Hunting did—ignoring the Assembly
3 Instructions and referencing only the above photograph—Lee opines that “[n]o
4 connector is visible on the end of the center support rail that is touching the
5 footboard.”74
6 The Court finds it telling that Hunting and Lee both decline to address
7 the clear Assembly Instructions or the blurry assembly images in the Inspection
8 Report, especially step 6, before opining on the ultimate issue of how the
9 longitudinal bar connects to the headboard/footboard. Moreover, even setting
10 aside the fact that Hunting reaches internally inconsistent conclusions (i.e., she
11 finds it not possible to tell what type of headboard/footboard-to-longitudinal-bar
12 connection exists, but she has the ability to discern that it is likely a rectangular
13 hole), the Assembly Instructions depicted in the Inspection Report speak for
14 themselves. Speculation ignoring this evidence is insufficient to create a
15 genuine dispute of material fact. It is well settled that conclusory or speculative
16 statements in an affidavit are insufficient to create a material factual dispute. See
17 Phytelligence, Inc. v. Washington State Univ., 973 F.3d 1354, 1364 (Fed. Cir. 2020)
18 (conclusory or speculative statements in an affidavit insufficient to create
19 genuine dispute of material fact); Phonometrics, Inc. v. Hosp. Int’l, Inc., 120
20 F. App’x 341, 345 (Fed. Cir. 2005) (non-moving party “must have something
21 more than conjecture and speculation to create a disputed issue of material
22 fact”). For the same reasons that Hunting’s speculation cannot create a
23 genuine dispute of material fact, neither can Lee’s. See Abbott Lab’ys v.
24 TorPharm, Inc., 300 F.3d 1367, 1375 (Fed. Cir. 2002) (speculative statements by
25 company officials cannot give rise to a genuine dispute of material fact).
26
27
73 See Decl. of Jayson Lee [ECF No. 363-6].
1 Zinus offers no alternative argument concerning the Assembly
2 Instructions. But as clearly depicted, Step 6 directs attaching the “centre
3 support rails” (i.e., the two-pieced longitudinal bar) to the headboard and
4 footboard as shown below.75 In the pictorial directions, item 4 depicts the
5 equivalent of the first connecter and second connecter on the longitudinal bar,
6 and item 2 depicts the equivalent of the third connector on the headboard and
7 the fourth connector on the footboard, with the adapted ends 4 able to slide
8 down into the 2 connectors on the head and footboard, respectively. As claimed
9 in the patent, items 2 (footboard connector) and 4 (footboard-connecting-end of
10 longitudinal bar) are directly connected when the bed is in an assembled state.
11 Thus, the disputed claim elements are present in the 2012 Mersin bed.
12
13
14
15
16
17
18
19 The fact that the embodiments described in the ’123 Patent specification
20 use slots sliding over bolts rather than tongues sliding into slots to form the
21 required connections does not undermine this conclusion for two reasons. First,
22 nothing in the intrinsic evidence suggests that the claimed connectors are points
23 of novelty for the bed frame such that the specific type of connector shown in
24 the specification is required. Indeed, this point is supported by the broad claim
25 language, “connector.” Second, although the specification provides some
26 examples of connectors, patent claims are read in light of the specification;
27
75 See Lawrie 2019 Deposition, Ex. 557 at p. 3 of instructions, available at
1 limitations from the specification (such as using bolts for the connectors) should
2 not be imported into the claims. See Abbott Labs. v. Sandoz, Inc., 566 F.3d 1282,
3 1288 (Fed. Cir. 2009). The ’123 Patent notes expressly that its specification
4 “does not purport to define the invention. The invention is defined by the
5 claims. . . . The accompanying drawings, where like numerals indicate like
6 components, illustrate [only] embodiments of the invention.”76
7 Although Lawrie made repeated misrepresentations about this point,
8 Zinus does not dispute that Jusama/Lawrie purchased the 2012 Mersin bed from
9 Woody. Zinus also does not dispute the credibility of disinterested witness Tan.
10 Rather, Zinus argues that it should not have to respond to Cap Export’s
11 anticipation argument; to the extent that it does respond, Zinus focuses
12 narrowly on only some of the evidence before the Court. Because the 2012
13 Mersin bed contains all of the same elements as the bed subsequently claimed in
14 the ’123 Patent, the Court concludes that, based upon clear and convincing
15 evidence, the ’123 Patent is invalid for anticipation by the 2012 Mersin bed
16 purchased by Jusama/Lawrie.
17 e. Obviousness
18 Because the Court concludes that the ’123 Patent is invalid for
19 anticipation, the Court declines to analyze Cap Export’s obviousness arguments
20 under 35 U.S.C. § 103(a).
21 C. Non-Infringement
22 Cap Export seeks a declaration of non-infringement; Zinus opposes.77
23 Because the Court finds all three asserted claims of the ’123 Patent invalid for
24 anticipation, the question of infringement is now moot. See Lough v. Brunswick
25 Corp., 86 F.3d 1113, 1123 (Fed. Cir. 1996) (“Invalidity is a complete defense to
26
27
76 ’123 Patent at 2:20-22 & 2:26-27.
1 infringement and . . . [n]o further public interest is served by [the Court]
2 resolving an infringement question after a determination that the patent is
3 invalid.”). Therefore, the Court declines to reconsider infringement. As a
4 practical matter, the Court notes that its earlier infringement ruling is
5 undermined by its current invalidity ruling, which is based upon a more
6 complete evidentiary record and is dispositive. In any event, in light of the
7 Court’s instant invalidity ruling, any infringement would not give rise to liability.
8 See Pandrol USA, LP v. Airboss Ry. Prod., Inc., 320 F.3d 1354, 1365 (Fed. Cir.
9 2003) (“an invalid claim cannot give rise to liability for infringement”).
10 D. Unenforceability Due to Inequitable Conduct
11 Cap Export also seeks summary judgment on its affirmative defense of
12 inequitable conduct based upon, inter alia, Oh’s alleged knowledge of prior art
13 bed-in-a-box products before he submitted an inventorship declaration to the
14 PTO.78 Relatedly, Zinus seeks partial summary judgment that Colin Lawrie
15 committed no inequitable misconduct, allegedly because Lawrie was not
16 substantively involved in the patent application.79
17 Because the Court concludes that the asserted claims are invalid, it need
18 not reach Cap Export’s affirmative defense of inequitable conduct, because
19 doing so would not change the scope of the judgment. See Freedman Seating Co.
20 v.Am. Seating Co., 420 F.3d 1350, 1363 (Fed. Cir. 2005) (after dispositive ruling
21 of no infringement, the Court “need not address the issue of enforceability”
22 where it is asserted “not as a counterclaim for a declaratory judgment, but
23 rather, as an affirmative defense” to the disposed-of claim because the
24 affirmative defense “would have no effect on the scope of the judgment”);
25 Lacks Indus., Inc. v. McKechnie Vehicle Components USA, Inc., 322 F.3d 1335,
26
27 78 Cap Export MSJ at 20:4-18.
79 See Mem. of P. & A. in Supp. of Zinus’s Mot. for Partial Summ. J. that
1 1346 (Fed. Cir. 2003) (declining to “reach the validity issues pertaining to [the
2 patents] because we have affirmed the trial court’s grant of summary judgment
3 of non-infringement and because invalidity was raised below merely as an
4 affirmative defense to infringement”); cf. Cardinal Chem. Co. v. Morton Int’l,
5 Inc., 508 U.S. 83, 93-94 (1993) (“An unnecessary ruling on an affirmative
6 defense is not the same as the necessary resolution of a counterclaim for a
7 declaratory judgment.”). Therefore, both Motions, as they relate to the
8 affirmative defense of inequitable conduct, are DENIED as moot.
9 IV. CONCLUSION
10 For the foregoing reasons, the Court hereby ORDERS as follows:
11 1. Cap Export’s Motion for Summary Judgment is GRANTED-IN-
12 PART and DENIED-IN-PART. Specifically, the Court GRANTS Cap
13 Export’s Motion with respect to invalidity and DENIES it as moot with respect
14 to noninfringement and inequitable conduct.
15 2. Zinus’s Motion for Partial Summary Judgment of no inequitable
16 conduct is DENIED as moot.
17 3. The Court declines to exercise supplemental jurisdiction over
18 Zinus’s sole remaining claim for unfair business practices under
19 Cal. Bus. & Prof. Code § 17200. Accordingly, that claim is DISMISSED
20 without prejudice.
21 4. Counsel for the Cap Export and Abraham Amouyal and counsel for
22 Zinus are DIRECTED to meet and confer telephonically (or by Zoom or other
23 virtual platform) on or before June 9, 2021, regarding a form of Judgment
24 resolving this case.
25 5. On or before June 16, 2021, the parties are DIRECTED to file a
26 Joint Status Report that includes a draft Judgment resolving this case. If the
27 parties cannot agree on the form of that draft Judgment, then their Joint Status
1|| Report shall include a brief description of their points of disagreement and each
2|| party’s short justification for its respective position.
3 IT ISSO ORDERED.
□□ WO
5|| Dated: June 2, 2021
6 SN TED | CATS DISTRICT JUDGE
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/cases/10041000. Public record. Not legal advice.